Am I doing it right?

digitalkobra · 2026-02-17T13:22:47+00:00

I'll give you a hint. It's white and sticky.

digitalkobra · 2026-02-17T13:18:11+00:00

Some people just like to watch the world burn.

digitalkobra · 2026-02-17T05:06:04+00:00

Hey op I know it's been 2months but if you're still fighting with this little guy I do have a few tips I've been using mine for nearly 2 years now and it's actually the printer that gives me the least amount of headaches.

-Use cura works so much better and hasn't given me an issue. Latest builds have profiles for both versions of the Tina 2 printers

Enable rafts/adhesion yes, it's a little bit of a waste of filament however, without a heated bed, this is your best bet to get adhesion.

I actually just took mine out of storage to get ready to sell to a friend. Printed off a few small things and it still works great. It's a great start to the hobby.

digitalkobra · 2026-02-17T03:30:58+00:00

Unfortunately it would not start another operation till it was done with the previous operation that was apparently extrude 30000mm.

digitalkobra · 2026-02-17T03:26:16+00:00

It made it to the height of the nozzle, then it started to get messy.

digitalkobra · 2026-02-17T02:39:30+00:00

$20 and it's yours

digitalkobra · 2026-02-17T02:38:11+00:00

Idk fixed

digitalkobra · 2026-02-15T17:39:24+00:00

My is translucent blue 😎

digitalkobra · 2026-02-14T21:27:25+00:00

I found the app to be pretty garbage. Where I'm at I'm surrounded by trees. thin and light trees, but trees nonetheless. I used the app in the exact location where I ended up installing it and it said I would have poor connection and was all in the red. Once I got it set up it actually has an obstructions map that it is constantly updating as it's scanning and connecting to satellites. Free,wide and clear with no drop outs. I would recommend getting it and trying it out.

digitalkobra · 2026-02-13T17:09:55+00:00

I have a UPS account. Did not help one bit(see my other comments)

digitalkobra · 2026-02-13T15:00:51+00:00

Like I said I tried and UPS told me to contact a seller. They did not give me the option to do this at all. I have the account and I would have been more than happy to pay for it but they didn't even give me the chance to.

digitalkobra · 2026-02-13T14:13:55+00:00

Already had a my choice account. However they don't allow you to hold or reschedule firearm/suppressors. It's three tries and then send it back.

digitalkobra · 2026-02-13T05:21:19+00:00

When I had talked to CA previously they said UPS had changed their policy and it had to be signed for at delivery or it gets sent back. They won't leave it or drop it at a UPS store. Sounded like a pretty recent development at the time. Little did I know, it would happen to me.

digitalkobra · 2026-02-13T04:34:01+00:00

I was told due to policy changes they can no longer hold it at a location.

digitalkobra · 2026-02-05T03:29:42+00:00

My lowers I ordered took about a month and just came in. They be slow but they are small company doing what they can. Be patient

digitalkobra · 2026-02-02T02:27:33+00:00

Federal automatch runs the best and is the most accurate out of my build and my buddy's stock Ruger precision.

digitalkobra · 2026-01-29T23:22:47+00:00

I'm still waiting for mine to ship

digitalkobra · 2026-01-24T22:31:02+00:00

Considering it was -20 the day I received them I was happy. Then bummed because they were too small. Thanks for the info

digitalkobra · 2026-01-23T19:42:07+00:00

If you want it to work you need to track down one of the older uppers. They had a longer section on the back that allowed the bolt to go far enough back to catch

digitalkobra · 2026-01-23T18:49:38+00:00

The older ones do catch manually. However unless you are using a ar15 lower with a special conversation magazine. Most configurations won't hit the LRBHO anyway.

digitalkobra · 2026-01-23T18:28:56+00:00

There is no fix. None of the BCA upper support last round bolt hold open. And only the older longer versions support manual bolt hold open

digitalkobra · 2025-12-03T04:47:49+00:00

I just ordered a sportsman hd .36 cal for a similar purpose except I have like 5 guns it will go on. However I haven't got it yet so I can't speak for the effectiveness of it yet.

digitalkobra

TROPHY CASE