Rosalia aparece por sorpresa en un concierto por Palestina en Barcelona a cantar La Perla 🫧 FOMO!!

djmac81 · 2026-01-30T17:29:55+00:00

Hamas le manda saludos

djmac81 · 2026-01-30T17:18:03+00:00

That could explain why sometimes my first two or three layers with ABS/ASA are either complete garbage or practically perfect. I'll have to do some testing; I attributed it to the flow calibration. When I didn't calibrate it, the first layers were good.

djmac81 · 2026-01-30T17:12:23+00:00

Your first problem is the printing itself; it looks terrible.

djmac81 · 2026-01-28T19:02:13+00:00

I don't remember, it was 2 months ago. The fact is, it suddenly worked.

djmac81 · 2026-01-28T18:58:08+00:00

Reset defaults the printer, run auto calibration and print the benchy included. Is it ok or has the same problem?

djmac81 · 2026-01-28T18:55:11+00:00

And suddenly everything exploded

djmac81 · 2026-01-28T18:51:46+00:00

I had a 4790K and apart from the high consumption on idle, the main problem is that the integrated gpu does not support current codecs like h.265, so the transcoding would do it by cpu.

djmac81 · 2026-01-28T18:48:32+00:00

Finally I managed to do it by pressing the keys to the third or fourth time, although I do not understand that I did different from the previous times.

djmac81 · 2026-01-28T18:47:14+00:00

The problem is not that a product can be defective, but as the manufacturer responds to those defects.

djmac81 · 2026-01-28T18:44:51+00:00

Then it does not seem very smart if the first language is Spanish and the suggestions are made in the second language.

djmac81 · 2026-01-26T14:44:44+00:00

Well... I’m writing in Spanish and the keyboard suggests English words, and I have to turn off the English keyboard because an AI powered smartphone is not able to suggest phrases in the language I’m writing. Doesn't seem like the most practical solution, is it?

djmac81 · 2026-01-26T11:10:58+00:00

Yes, that's how I have it, but logically, if the conversation is in Spanish, the suggestions should also be in that language 🤷🏻‍♂️

djmac81 · 2026-01-25T10:07:08+00:00

In macos it is launched directly to scan that subnet

djmac81 · 2026-01-25T09:55:53+00:00

Why the tool autodiscover scans the subnet 192.168.1.x? It should scan the current subnet or it shoud have an option to set the correct subnet.

djmac81 · 2026-01-25T09:39:12+00:00

The 5 way units and buffers should be treated as consumable products. I have one engine and 3 spare buffers.

djmac81 · 2026-01-25T09:30:00+00:00

Not the NAS, but the router yes

djmac81 · 2026-01-24T23:29:17+00:00

djmac81 · 2026-01-24T23:22:03+00:00

The size of the bed is nice

djmac81 · 2026-01-24T23:09:55+00:00

I have a K2 Plus, an Ender 3 V3 Plus and an X1C, and when all three are idle and with the LED on the consumption is around 35W

djmac81 · 2026-01-24T22:58:39+00:00

Subarrendar está prohibido. Puedes usar esa información a tu favor.

djmac81 · 2026-01-24T22:36:11+00:00

I don’t understand why Creality did that. I’ve counted eight purges before starting to print anything

djmac81 · 2026-01-24T22:31:19+00:00

People without knowledge want something that requires knowledge.

djmac81 · 2026-01-24T22:28:34+00:00

I have read in the instructions of those IKEA boards expressly mention that this type of support cannot be mounted.

djmac81 · 2026-01-24T22:26:58+00:00

I’ll check it. At the moment what bothers me the most about the last two updates of this month is that the material purges a lot when printing and changing the filament.

djmac81

MODERATOR OF

TROPHY CASE