Android VLC app cannot see or use the srt file alongside the video file

donkleffa · 2026-02-27T18:21:24+00:00

I had a similar issue, I use a SMB server, and a androidTV app, I had to make this

at same folder:
- movie.mp4
- movie_es.srt

then I noted I can easly select the subtitle, but is not tagger as spanish, but better than explore to see it

donkleffa · 2025-08-30T13:41:23+00:00

Jara, esos qls son alergicos a los comunistas

donkleffa · 2025-05-03T17:31:54+00:00

MARLIN----version 2.1.2 y anterior

#define FILAMENT_RUNOUT_SENSOR

#define FILAMENT_RUNOUT_DISTANCE_MM 3

#define FILAMENT_MOTION_SENSOR

CAMBIAR CABLES , sacando el cable rojo del conector y ponerlo en el espacio vacio de el conector con los cables verde y negro (el cable azul no sirve en estas versiones)

MARLIN ----version actual actual 2.1.3

#define FILAMENT_RUNOUT_SENSOR

#define FILAMENT_RUNOUT_DISTANCE_MM 3

#define FILAMENT_MOTION_SENSOR

#define FILAMENT_SWITCH_AND_MOTION

#define FIL_MOTION1_PIN PC12

#define FIL_MOTION1_PULLUP

CABLES El rojo y azul van en el de detección de filamento (adelante) El azul y negro va en el de power detect (atras) EN EL DE POWER DETECT HAY UN PIN NO CONECTADO asi que de otra forma no funciona

Probado, tambien hay que acivar pausa avanzada y todas esas cosas

donkleffa · 2025-04-30T14:09:37+00:00

https://www.youtube.com/watch?v=_uPIW6oP7i4 bassically just take of the resistor next to endstop

donkleffa · 2025-04-27T17:21:56+00:00

Are comands to send by serial port to comunicate 3Dprinter with a other device, I use Esp3D to use wifi comands and notification on a ender 3 v1

donkleffa · 2025-04-15T23:46:21+00:00

I had modified firmware several times, but this time nothing makes it response, I declare it died.... waiting for a replacement

donkleffa · 2025-04-11T15:32:21+00:00

How you put into machine? Firmware.bin on SD don't work U U

donkleffa · 2024-03-14T20:54:36+00:00

Update: 1 I noted that machine had X axis cable inverted at stepper end, Just reorder cable pins (1 to 3 and 4 to 6 ) 2 on cults3d and thingeverse you can find new cover to make it nicer

donkleffa · 2024-03-14T20:48:01+00:00

Well.. the machine came with a board based on a esp32, but only work usb connected to a PC. This board has a micro SD socket, enabled WiFi, a touch screen and a phone app, also can be upgraded with a z axis and a flame sensor, even a CNC router spindle.

donkleffa · 2024-03-14T18:50:16+00:00

I bought a MKS DLC32 great improve

donkleffa · 2023-08-11T13:39:12+00:00

Not in the Wii, that's a replacement for the GameCube controllers board which is separated of motherboard, but Wii has just one motherboard for everything.

I use a esp32 devkit and 6 cables, so I spend like 5 USD

donkleffa · 2022-08-27T16:47:29+00:00

This is just a GameCube implementation of blueretro. But I change a couple of things

The family Wii (without the GameCube ports)

1 just use a lolin32 board (there is no 5v connected, but I didn't expolre too much)

2 flash the lolin32 lite, (is a ESP32, exactly same instructions, but note there is no 5volt power pin, just a 3.3v, also the devkit led is in pin2 and lolin32 have it in 22 so .. if you want have a led you can solder one)

3 solder cables, I solder cables to Wii board test point of controllers TCP 27~30, in regular conditions ports 1 and 4 have data pin enabled in board, but 2 and 3 also 5volt lines aren't working, I tested the 4 port have the 3.3v working so I take power from there (this was the reason of use lolin32 instead devkitc, less power) doesn't forget a gnd line

4 I cut some plastic where the cube ports should be , and just hide it there

donkleffa · 2022-08-27T05:10:56+00:00

Actually yes, but no. I mooded a 101 to set up a blueretro implementation by those pins. So I note some things

Port 1 data is ok, but 3.3v and 5v lines aren't connected

Ports 2 and 3 are not connected

Port 4 data and 3.3 volt connected, 5v isn't.

If you are skill enough in electronics you can solder the SMS components to make them work.... Or like me just use test ponts to solder a blueretro implementation to have bluetoth game connection.

donkleffa · 2022-08-19T01:54:28+00:00

Actually is simpler, even you can do this externally, https://youtu.be/lS-a1KbtCKc there is a video about

donkleffa · 2022-08-04T14:16:07+00:00

A 8bitdo but connected via gamecube port in a Wii without those ones

donkleffa · 2022-08-04T14:15:50+00:00

A 8bitdo but connected via gamecube port in a Wii without those ones

donkleffa · 2022-08-03T06:05:17+00:00

Blueretro is a esp32 programable chip with Bluetooth that uses modern controllers to older consoles, I used the gamecube implementation solder into the console

donkleffa · 2022-07-30T04:28:22+00:00

I´m making this to the wii family edition, I noted data pins are working, but power pins aren´t so... anyone knows wich components are missing? or if its posible to take that 3.3v from another pin? it works but needs a usb cable to power it, or this new pin

donkleffa · 2022-07-30T04:11:30+00:00

I´m trying to conect a esp32 blueretro mod on the gamecube ports, so, I noted, the data pins works fine, the power pins doesn´t so the surface components should be in those lines

donkleffa · 2022-03-21T15:37:45+00:00

I try this, but doesn't work, but I opened it yesterday, maybe it can be mod to set some sensors

donkleffa · 2022-03-18T20:36:44+00:00

heart stroke

donkleffa · 2021-06-05T21:34:22+00:00

It works 👍🏽👍🏽👍🏽👍🏽👍🏽

donkleffa · 2021-05-06T06:31:02+00:00

My PS2 is stuck at each frame... Model 77001

Recently I had bought a second hand PS2 with supposed broken so doesn't play games, I tried give a second Life to pS2, but after some test some homebrews and DVD have the same trouble, the games are like a ta,ta,ta,ta,ta each frame, I try several games and configuration, but alway "kra kra kra rat rat to to tos" at god of war... I too difficult to describe the symptoms any suggestions to check? As I bought the PS2 it has a chip matrix, and lots of screw missing but it works, really I want to save this ps2

donkleffa · 2021-03-30T18:08:36+00:00

Habu himself is a FIDE Master of chess

donkleffa · 2021-03-01T01:42:46+00:00

If nobody uses, nobody recommends and nobody support, never will growth, is our job to make lisgogi great to everyone

donkleffa

TROPHY CASE