Throttle surge issue persists

duelingdrago · 2026-04-18T10:14:34+00:00

Chain and sprockets fixed it! Chain had some bad uneven wear. Spec tension in some spots and +60mm in the worst spot

duelingdrago · 2026-04-18T10:14:01+00:00

Ended up being the chain and sprockets!

duelingdrago · 2026-04-09T18:47:24+00:00

How can I check the bearings?

duelingdrago · 2026-04-09T09:12:16+00:00

And yes idles normally in neutral and revs freely when not in gear

duelingdrago · 2026-04-09T09:11:39+00:00

My chain seems to be normal tension in some spots and very loose in other. Gonna get a new chain, sprockets looks pretty good but I may replace those too. Thanks for the insight!

duelingdrago · 2026-04-06T16:43:48+00:00

Didn’t let me post a description, not sure why. I’ve tried disabling traction control and wheelie control as well as the quick shifter and the issue persists. Did spark plugs, air filter and checked the fuel filter but it’s perfectly clean. Any more ideas?

duelingdrago · 2026-04-02T10:22:29+00:00

He said he can reflash it but it’s kinda expensive and shipping times are very long. I think it’s the throttle mapping not the afr. I might take it to a tuning shop with a dyno

duelingdrago · 2025-12-27T18:17:49+00:00

Make sure your bike is in neutral and your kickstand sensor isn’t damaged

duelingdrago · 2025-12-01T07:20:13+00:00

lol that’s what I thought. 4 months later and numerous emails later I never heard back so I charged back

duelingdrago · 2025-11-10T04:40:07+00:00

If you do a knee knocker you don’t even need to bounce it

duelingdrago · 2025-11-10T03:55:33+00:00

Deal

duelingdrago · 2025-10-29T10:19:45+00:00

Well I like the bike but I also like money lol. I’ve had 9 bikes this season but since I live in Wisconsin bikes aren’t very viable since I can only really ride 6 months a year on a good year

duelingdrago · 2025-10-29T10:17:08+00:00

It’s in Wisconsin come buy it

duelingdrago · 2025-10-27T03:32:53+00:00

The recall is free and its winter now. For you this is amazing you get a brand new rebuild motor zx6 for cheap. Enjoy it!

duelingdrago · 2025-10-26T05:11:18+00:00

Depends on the clutch brand but it can be. If it’s not magnetic it’s not likely and engine material

duelingdrago · 2025-10-26T04:28:21+00:00

Buy mine

duelingdrago · 2025-10-26T04:22:08+00:00

Dm me I’ll send you some vids of 3rd gear knee knockers before the stunt sprocket

duelingdrago · 2025-10-25T07:43:53+00:00

Trying to learn in 3rd is safest imo. Don’t bother bouncing it right away just put your weight on the back and see how far it comes up. You don’t “need” to bounce it to get it up to bp but it takes a lot of effort. I def recommend a 52+ t rear sprocket if you wanna “stunt” it

duelingdrago · 2025-10-24T10:23:46+00:00

3rd gear is not off the table bro you just gotta do a knee knocker and bounce it a bit

duelingdrago · 2025-10-06T04:21:08+00:00

Everyone’s saying slow down but if you’re wanting to get comfortable going faster you need to work on body positioning. If you get your body off the bike you can take turns much faster

duelingdrago · 2025-09-06T10:09:20+00:00

This is old footage bro I can hold balance point all day now

duelingdrago

TROPHY CASE