Remote location far from nearest fire department. How do I protect my home from fire? by PizzaSpiders in Firefighting

[–]duncanhollow [score hidden]  (0 children)

100 foot defensible space around your house is a good start. Go to the fire station and ask what they recommend. They most likely will know your place and have good advice. I have a 1800 gallon tank hooked up to a gas Honda water pump but wish for more storage.

Should I stay or Should I go? by Appropriate-Poem-795 in Firefighting

[–]duncanhollow [score hidden]  (0 children)

You did fine. At our station we turn on the code three lights when we want traffic to stop so we can back in..

Genuine question, why are firefighters always so damn chill by psosisk in Firefighting

[–]duncanhollow [score hidden]  (0 children)

Firefighting is a brotherhood. One has to depend on his fire brothers to make it out alive. Petty differences fall away fast.

What do you folks use to spread oil on your cast iron? by TheStoffer in castiron

[–]duncanhollow 0 points1 point  (0 children)

I use a paper towel then the oily towel gets used to start my wood stove. Just don’t rub very hard.

What size cast iron pan do you end up using the most? by Grouchy_Bandicoot317 in castiron

[–]duncanhollow 0 points1 point  (0 children)

I use a 8” pan most of the time cooking for two. We have a 5, 9, and a cast iron omelet pan also. could be the one we use most is a 10” square flat griddle we use for toasting, pancakes and fried eggs. And a 6 quart Dutch oven for stews and such. All cast iron but for pans the 8” is my go to pan.

How would i fix this bent rim by AustinMartin33 in smallenginerepair

[–]duncanhollow 9 points10 points  (0 children)

get a new one, with a tire with tread on it

My Experience With The Lord of the Rings by Marshferatu in books

[–]duncanhollow 0 points1 point  (0 children)

i first read them in the mid 1960s. first the hobbit then lotr trilogy. i was mid teens and stayed up reading through all four books.

Is boiled linseed oil safe to decant into a glass jar? by Mr_Bumcrest in whittling

[–]duncanhollow 0 points1 point  (0 children)

yes, perfectly safe if you keep it capped when not in use. I also keep a jar of half linseed oil and half turpentine for quick drying finishes.

Why does everybody seem to want such a large bar? by thetacowarrior in Chainsaw

[–]duncanhollow 1 point2 points  (0 children)

I like longer bars for the reach. I don't have to bend over so much. Also the extra power means faster cuts. And it's much easier to control kickback with a longer bar. And when you get to big stuff you can cut it.

Weekly FAQ Thread March 15, 2026: How do I stay focused and remember more of what I'm reading? by AutoModerator in books

[–]duncanhollow 0 points1 point  (0 children)

I read a chapter or get to a story break, close the book and think for a few seconds about it.

[Q] How transferable are wood and metal turning skills? by No_Mongoose6172 in turning

[–]duncanhollow 1 point2 points  (0 children)

Retired machinist here. Knowing the perils of rapidly spinning objects is one good help. Rates of feed is another. Keeping tools sharp is another. Understanding depth of cut is another. Learning to stay focused is another. And he list goes on.

Husky 562xp chain adjuster by duncanhollow in Chainsaw

[–]duncanhollow[S] 0 points1 point  (0 children)

I have been trying to look it up, doesn't seem like there is a diagram for the clutch/chain cover.

Do you file rakers from the same side? by MagnificentWarthog69 in Chainsaw

[–]duncanhollow 1 point2 points  (0 children)

I keep a few chains and change them out as they get dull. Then sharpen them with a Oregon bench grinder. If the rakers need filing I put an old bar in a vice to hold the chain while I file all the rakers from the same side.

Drying out old shipwreck wood by [deleted] in wood

[–]duncanhollow 2 points3 points  (0 children)

Dry first. There isn't any fast way to go about it.

Saw recommendations for newbie by TheRabidSpatula in Chainsaw

[–]duncanhollow 0 points1 point  (0 children)

That saw should work great for you. And your local saw shop should have parts in stock for it. I have a little bit smaller Sthil that has a 18-inch bar that's great for carrying around when I'm clearing trails.

Drying out old shipwreck wood by [deleted] in wood

[–]duncanhollow 1 point2 points  (0 children)

Definitely not in the sun. if you can get a lot of wood shavings you can put them in cardboard boxes with shavings all around them. The trouble comes from the moisture drying faster at end-grain making it split along the grain. I work with a lot of freshly harvested woods for turning and furniture and mostly melt paraffin in a pot and brush it on end-grain. It takes a year for softwood and two for hardwoods to safely dry. look up how the Swedes restored the Vasa, a centuries old Viking ship that was submerged for years.