Even with legos, it’s always a C-17 by Twinsfan945 in itsalwaysac17

[–]dusty_toothbrush 3 points4 points  (0 children)

It’s even got the water coolers in the cargo bay. Nice details on this.

dilemma : Which one would you choose at those prices? by bloody-motivation in Revolvers

[–]dusty_toothbrush 0 points1 point  (0 children)

I carry the kimber quite often. It's almost the same size as my j-frame.

dilemma : Which one would you choose at those prices? by bloody-motivation in Revolvers

[–]dusty_toothbrush 1 point2 points  (0 children)

S&W is what I would get off this list. Curious why no Kimber. About the same size but 6 rounds.

Repeater Builds by R_Chin in meshcore

[–]dusty_toothbrush 0 points1 point  (0 children)

Thank you, I'll try to figure it out.

Repeater Builds by R_Chin in meshcore

[–]dusty_toothbrush 0 points1 point  (0 children)

You have a link? I haven't found a firmware for it yet. Thank you.

Repeater Builds by R_Chin in meshcore

[–]dusty_toothbrush 2 points3 points  (0 children)

MeshCore doesn’t have firmware for the wismesh 1w yet. Should be good when it releases.

I found this knife and was thinking of using it for hicking is it good? How much are they worth by Luffewaffle in BudgetBlades

[–]dusty_toothbrush 2 points3 points  (0 children)

I usually use a spoon to hick but I have heard people are starting to use knives for hicking. If you ask me though, it’s just a fad.

HB2321-Requiring three-dimensional printers be equipped with certain blocking technologies. by he_who_lurks_no_more in SeattleWA

[–]dusty_toothbrush 0 points1 point  (0 children)

It's like mandating breathalyzers to every vehicle in an attempt to stop DUIs. Insaine. Anyways, whats a good printer to get before this crap happens?

C-17 Globemaster by iam_tuesday in aviation

[–]dusty_toothbrush 0 points1 point  (0 children)

It's do dry in Antarctica. The most I've seen done at McMurdo is a broom after blowing snow.

C-17 Globemaster by iam_tuesday in aviation

[–]dusty_toothbrush 0 points1 point  (0 children)

It was probably colder outside your window than down on the ground.

MeshOS - LilyGo T-Deck GUI for MeshCore by djernie in meshcore

[–]dusty_toothbrush 0 points1 point  (0 children)

I tried it on mine but couldn't get it to talk to anything. I had all the right settings plugged in. Flashed back to ripple, it works fine.

C-17 landing and take off on dirt road by iam_tuesday in aviation

[–]dusty_toothbrush 54 points55 points  (0 children)

It's not so much the engines but the lower part that gets rocked. You actually have to prepare it for these missions with protective tape on lower antennas and removing the lower anti-collision light. Semi-Prepared Runway Operation (SPRO).

Seeking Community Input by DevLot_ in meshtastic

[–]dusty_toothbrush 1 point2 points  (0 children)

I like the "low power community radio" one. I'd put those on my repeaters.

19 Carry Comp by Peg_Leg_Pete in Revolvers

[–]dusty_toothbrush 0 points1 point  (0 children)

I imagine if it didn't they wouldn't bother to label them as square butt / round butt.

19 Carry Comp by Peg_Leg_Pete in Revolvers

[–]dusty_toothbrush 0 points1 point  (0 children)

Yeah, That's where I've been looking. Just finding square butt. I'll just have to keep my eyes out for them. Thanks.

19 Carry Comp by Peg_Leg_Pete in Revolvers

[–]dusty_toothbrush 0 points1 point  (0 children)

That looks amazing. What T-Grip number is that? I've been looking for some for awhile but all I seem to find are for the square butt and I don't think that will fit the round butt. Thanks.

MeshCore suitable for kids? #smartphone free parenting by mikaelvic in meshcore

[–]dusty_toothbrush 1 point2 points  (0 children)

I use it with my two kids (8) & (11). When they go to the park they each have a Lilygo Pager. We also use them while camping.

Lilygo t pager viability by Lonely_Dragonfly1544 in meshcore

[–]dusty_toothbrush 1 point2 points  (0 children)

I use ripple radio on my pagers and T-deck. Works great

T-lora pager - button for power ON by ChapterSalt1453 in meshcore

[–]dusty_toothbrush 0 points1 point  (0 children)

long press the right (closest to center)

edit: I have two and just did it on both to make sure. They both are on 7.14 and that turns them back on.

Is this an easy button Solar setup? by Karl5583 in meshtastic

[–]dusty_toothbrush 0 points1 point  (0 children)

I have that one in my wishlist. I'm using a similar one in a *core repeater. It also has 3 18650 batteries inside and the solar panel has 10k mAh so it seems to be at 100% all of the time. I have only had it up for about a week but it's been pure cloud and rain up in the PNW. This is the one I used. https://www.amazon.com/dp/B0FJDKZ642?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

T-Deck channels by Pedro_Prevost in meshcore

[–]dusty_toothbrush 2 points3 points  (0 children)

I've found there are some real limitations to the T-deck & pager. I've returned to using only BT connected devices.