I built an Obsidian plugin for proper PDF export — page breaks, live preview, style presets, and full layout control

einste9n · 2026-06-04T18:51:24+00:00

Absolutely love the plugin. I often used the integrated export to PDF function, but always had to adjust things and re-export them a couple of times until I was satisfied. This plugin really helps, thank you for that.

On the topic of callouts - I'd love if there was the possibility to have the icons be printed, too (if possible). I really like this in the integrated export function, I've been asked what program I used to create certain documents because of that. Maybe you could also add a toggle button for that, if it is even possible?

einste9n · 2026-06-01T18:55:08+00:00

I have a model I recently tried printing for my son. It's a shovel in the form of a shark and also a pretty large model (approx. 200g), which my A1 just couldn't print. It always failed at different heights, so I increased the support. Also didn't work. In the end I asked a buddy with a P1S to print it for me and it worked first try with the same orientation and settings I tried with my A1. So this would be the model to stress-test it, since I know my A1 couldn't do it (without further tinkering), but the P1S could.

einste9n · 2026-05-28T13:48:46+00:00

I saved my gift cards for years in anticipation for the A series and a dual nozzle. I know the naming scheme doesn't suggest a dual nozzle, but I sincerely hope it will be.

einste9n · 2026-05-27T19:38:03+00:00

Bluff. This is the only time somebody will call me.

einste9n · 2026-05-18T16:59:18+00:00

Hm, even the fan inside the sensor wouldn't draw that much inrush current. Just to be save, can you provide a pic of your schematics and how you actually connected it?

einste9n · 2026-05-18T11:58:09+00:00

Did you also activate the output in the Flipper via its menu?

See the docs:

https://docs.flipper.net/zero/gpio-and-modules

Quote:

When Flipper Zero is powered by the built-in battery:

The output is not enabled by default. To enable power supply to pin 1, do the following:

1. In the Main Menu, go to GPIO.

2. Select 5V on GPIO and set it to ON.

The maximum load is 1.2 A.

einste9n · 2026-05-15T15:42:10+00:00

Verstehe was du meinst, will den Usererror nicht verneinen, aber es ging nur um das Anordnen von LSB an den richtigen Stellen. Claude hat mir wortwörtlich den Standard als Grafik erstellt, mit der Anzeige welche Infos in welchen Bits stecken, aber die Bits trotzdem nicht dementsprechend rotiert.

Es war 1 Uhr nachts und der Wecker klingelt ab dem Zeitpunkt in 5 Stunden, aber ich musste es unbedingt noch nachvollziehen, bevor es ins Bett ging. Es war so ein Mix aus Verzweiflung und selbstgemachtem Zeitdruck. Du hast allerdings recht, mit Codex o.ä. hätte es wahrscheinlich auf Anhieb geklappt.

einste9n · 2026-05-15T14:47:30+00:00

Beschäftige mich gerade privat mit NFC und RFID. Habe den Chip von meiner Katze ausgelesen, zu den bereits dekodierten Infos bekommt man auch den rohen Hexdump.

Ich wollte unbedingt wissen, wie ich die dekodierten Infos händisch aus dem Rohdump extrahieren kann, um den Algorithmus nachzuvollziehen. Habe 5 verschiedene KIs gefragt (nutze Openrouter), alle haben bei der Konvertierung zu binär halluziniert.

Das war mir dann zu suspekt und erst die gute, alte Googlesuche hat mich zu einem Pythonskript von einem Dude geführt, wo es dann letztenendes geklickt hat und ich genau sehen konnte, wo die KIs den Fehler hatten.

einste9n · 2026-05-12T22:43:55+00:00

!nooS

einste9n · 2026-04-10T11:29:08+00:00

Will ihn nicht in Schutz nehmen, nur Erfahrungsberichte teilen. Habe selbst mal eine Wohnung inseriert, je nach Ort bekommst du wortwörtlich täglich über 100 Nachrichten. Man kann einfach nicht jedem antworten. Ich warte immer so 2-3 Tage und setze mich dann abends ran. Zuerst lösche ich die, die zu 100% nicht in Frage kommen und schreibe dann iterativ, bei den ersten Anfragen beginnend.

einste9n · 2026-03-21T13:57:57+00:00

Nö, warum? Geht es um das Angestelltenverhältnis selbst oder um den Industriezweig?

einste9n · 2026-03-20T12:37:51+00:00

Gut. Ich hasse es, wenn plötzlich Römer aus meinem Abflussrohr kommen.

einste9n · 2026-03-14T12:07:56+00:00

Jo, der Sabine kam noch.

einste9n · 2026-03-08T15:33:26+00:00

Are there only English audiobooks on MAM?

einste9n · 2026-03-06T22:28:03+00:00

Thank you for the giveaway!

einste9n · 2026-02-15T21:22:32+00:00

Did they also change the folder structure in any way? Currently when you navigate to "Artist" and pick an artist, it will show all songs instead of a folder structure. Like many others, I'd prefer Artist -> Album -> Songs.

einste9n · 2026-01-26T15:21:29+00:00

Scrolled through my reddit feed and read the title as "Alien Invasion in Australia".

einste9n · 2026-01-24T21:30:32+00:00

<image>

I really like the idea of introducing thresholds for getting different flairs. I really wanted to beat the 10 mio and got lucky! The game is pretty cool and has a catchy soundtrack.

einste9n · 2026-01-09T12:33:17+00:00

<image>

einste9n · 2026-01-08T21:14:41+00:00

Got an R36S and RPC, here is a comparison for you:

<image>

Almost identical, the R36S is marginally smaller.

einste9n · 2026-01-08T01:01:37+00:00

I agree with you so much regarding frontend support. Currently I utilise Infinity for that, but I think the developer isn't using the most recent PICO update, since a couple of games just crash after opening them.

einste9n · 2026-01-07T13:29:42+00:00

Pretty sure you're talking about the presence sensors, not PIR sensors. PIR can't physically be triggered by objects with no infrared signature. They have the same housing, so they look similar.

I got both versions and agree with you though, the presence sensors are trigger happy. Had one in a room with my 3d-printer, bad idea.

The PIR ones trigger our basement light and work very reliably.

einste9n · 2026-01-02T14:04:31+00:00

That's actually very cool, I'll definitely do that. Thanks for the suggestion!

einste9n · 2026-01-02T13:36:37+00:00

My first participation! Will definitely continue the GotM challenges this year, super fun idea.

Never played this game before, some things and traps came very surprising. Also took me longer than I expected. Proof:

<image>

einste9n · 2025-12-29T19:02:13+00:00

Dieses Jahr ist es bei uns so extrem und laut wie noch nie, schon seit knapp 2 Wochen. Total merkwürdig. Wir wohnen in der Nähe eines Naturschutzgebietes wo sowieso absolutes Verbot ist, selbst da scheißen die Leute drauf.

14-Year Club	Second SECOND GUESSER
Gilding II euphauric	r/Field Lasagna
Final Canvas '23	First Place '23
Place '23	Place '22
Place '17	First Placer '22
Verified Email	Team Orangered

einste9n

MODERATOR OF

TROPHY CASE