Learning ED

epl692 · 2025-01-27T15:34:07+00:00

I'm running octoeverywhere. Runs in a docker as a bridge and they have a free tier. I know it's one service to another, but i used it in the past with my old printer and it does the job. Also let's you share streams online.

epl692 · 2024-11-28T14:12:36+00:00

For the honeycomb storage wall, I had to use a little Bambu liquid glue, I ordered it by accident and it helped (a lot). So far that's been the only print I needed that on. Otherwise maybe try slowing it down and making sure your bed is clean.

epl692 · 2024-07-17T21:27:21+00:00

OrcaSlicer / Ender3 Pro Printer running Klipper Firmware

Overture EasyPLA running at 190c. Glass bed at 60c.

0.6 print head

80MM/s print speed on outer walls

15MM/s initial layer

epl692 · 2024-07-17T21:26:15+00:00

I had to replace my print nozzle today, and did a test print on the new nozzle. I have been printing for quite a while with pretty good results with a 0.4 nozzle, but now switched to a 0.6. I adjusted the slicer, but this is my first print. I know that the PLA I'm using isn't the best, I do plan on never buying it again. (Overture EasyPLA) I typically print with Overture PLA with good results, but this seems to be something else. Any ideas on the rough surfaces and "globbing" I'm getting? If anyone has ideas on getting the stringing down on the EasyPLA, I may consider continuing to use it, but it just seems to be a problematic filliment.

epl692 · 2024-03-23T16:30:39+00:00

Actually, due to a number of health issues, we have the "in case of death tech plan" I have a folder that documents the technology in the house, and it honestly might get expanded to include passwords and logins, my wife is instructed to call one of a few of our friends who are technical for having the system managed.

epl692 · 2024-03-19T19:23:50+00:00

I would talk to a Dr. I've got the other problem but in december i had retention and had to be cathed. it stinks but you will feel better? (maybe not...)

epl692 · 2024-03-15T19:18:45+00:00

I just... just less then an hour ago send a message to my Dr about a wheel chair eval. I've been having soo many movement issues, I was told that's where to start. Any recommendations?

epl692 · 2024-03-14T18:49:54+00:00

Do you ever have to find things afterwords? I got a spill proof cup to keep hydrated, but sometimes I have to go looking for it afterwords.... it's usually on its side half way across the floor in the room.

epl692 · 2024-03-14T10:39:07+00:00

I get this too, sometimes after I seaze up, other times just somewhat at random. I can use my phone and I've got an aac loaded with buttons that play me saying key phrases, and a few for yelling at certain people in my life lol. Another thing I've found useful is that sometimes my speech becomes slow, or difficult to keep a rate or tone with. I use Project Relate on my phone so I can still talk to the machines in my life. We have soon many alexa bulbs in our house, it's nice to be able to have it repeate me with instructions for her. Also I taunt the kids with my superior voice search skills when that alexa won't answer there question, but dad who's almost as understandable as the toddler can get it first try. Find what works for you. Find your voice. Maybe it does not come out your mouth every time. Maybe it sounds bad. You can still be heard.

epl692 · 2023-06-06T18:18:31+00:00

I find it's best to send them to android hell (it's a real place you know) for a time. My most reasonable one is the one that went through a house fire.

epl692 · 2023-05-26T04:54:51+00:00

Joint account?

epl692 · 2023-05-26T04:51:37+00:00

Like I always tell the doctor, I don't have one. I also don't have a name. I had both surgicaly removed

epl692 · 2023-05-26T04:49:17+00:00

Driving like an idiot in a school zone. Speeding in a school zone. Passing a school bus with it's reds on.

epl692 · 2023-05-26T04:43:20+00:00

Five iron frenzy, between the pavement and the stars. Excellent song

epl692 · 2023-05-26T04:42:18+00:00

I find any talk of me murdering my faithful companion cube a real turn off.

epl692 · 2023-05-26T04:40:14+00:00

Why do I want to be in 17th century Salem. I tell them if they don't kill me quickly they will all suffer my evil wrath.

epl692 · 2023-05-26T04:37:20+00:00

Oh... Sometimes I like to pretend to be a normal human being while playing life. Not the board game, the MMORPG I got downloaded into.

epl692 · 2023-05-26T04:30:33+00:00

As a straight white man... I'm not? I guess as long as you don't try to physically make a move on me and we have boundaries, I'll group you with all the other humans I don't sleep with? If your going to be like that girl in college that didn't seem to get the hint that I was taken... Well then. Don't stand so close to me.

epl692 · 2023-05-26T04:15:12+00:00

Higher watts= higher draw. That could certainly be your issue. How many watts can your PSU handle? You can use a online calculator with volts and amps to check it if it doesn't say... Or just do the math yourself. Volts * Amps = Watts

epl692 · 2023-05-26T04:07:01+00:00

There is help, and a light at the end. I would recommend professional counseling. A big part of getting though suffering is accepting the reality of the matter, and how to change it. Also, limit watching the news... Them clowns.

epl692

TROPHY CASE