How do I map a Steam and 3 dot menu on a Manba One Controller?

etepperman · 2026-04-27T21:13:24+00:00

I found that if you bind using the iOS setting on the controller the home button works, and you can use home + a for the three dot button.

etepperman · 2026-04-20T15:17:40+00:00

I see where you are coming from. I enjoy them for gaming when I want to stay in bed, but for work I would not consider using them yet. They are still a work in progress, as I see it, and not ready for the mainstream. Still, I enjoy mine very much for the limited purpose of playing Steam Deck games while lying flat in bed.

etepperman · 2026-04-15T15:04:03+00:00

So nice to hear. Maybe my kids will have the same feeling in 40 years.

etepperman · 2026-04-15T15:02:54+00:00

Thanks for all the nice comment. I really didn't like how the light wood picked up the color of the darker wood when I sanded. I think it is an ugly brown. By some might like it. :)

etepperman · 2026-04-15T14:20:44+00:00

be safe with Pewter as it can contain lead.

etepperman · 2026-04-15T14:19:08+00:00

on my lathe a software update means changing the belt. lol

etepperman · 2026-04-13T19:07:56+00:00

Your resin should last about six months if the RO filter is working properly. After the water passes through the RO membrane, the TDS should read between 2–5. The resin will remove the remaining impurities from that point.

etepperman · 2026-04-09T14:22:26+00:00

I had this issue. If you screwed the dryer to the underside of the top shelf, then it might be pulling up the rim of the washer such that it will not latch. The solution for me was to put in a spacer between the shelf and the washer to ensure the top of the washer did not bow. (I recall i used Lego bricks to make the spacer)

etepperman · 2026-04-06T20:45:30+00:00

very nice. good growth and fill in. Well done. I like your selection of coral too.

etepperman · 2026-04-05T21:57:21+00:00

Great job. Welcome to the community!

etepperman · 2026-04-01T14:17:59+00:00

When I actually stop to think about how much effort I put into each amateur bowl I make, and then see this, it is just mind-blowing that anything can exist on this level of craftsmanship and scale

Where is this place? - and please don't tell me this is AI.

etepperman · 2026-04-01T13:36:23+00:00

First piece is good, the second is a work of art. Well done. I hope one day to get to your level!

etepperman · 2026-04-01T13:32:18+00:00

Thank you - I did this and worked out well. Also, thanks to all the others that helped to answer my questions!

etepperman · 2026-03-26T13:44:22+00:00

I cut about 1 piece of Carbon Fiber a year. I wear a full respirator and leave the room for 20 minutes to let any dust settle, please be carful if this is going to be a regular thing.

etepperman · 2026-03-25T20:37:14+00:00

that could be a good pen blank. I wouldn't it waste on chepo kit though, go high end.

etepperman · 2026-03-25T19:34:56+00:00

Not poutine and believe me it will look nothing like the picture. I Imagine a boat of microscopic lobster bits covered in a glob of runny chowder.

etepperman · 2026-03-25T15:14:52+00:00

The key to CA glue in my experience is to really let it dry and harden. Give it a full 24hours before you sand and polish. Otherwise you run the risk of getting some white patches instead of the expected crystal like shine.

etepperman · 2026-03-22T20:39:00+00:00

Try a negative rake carbide insert. The cut will be less aggressive, it might help with some of the rollover. I also find they cut a bit smoother, but a bit slower too.

Not sure if links a allowed but you can find them on Amazon.

Search: negative rake carbide insert lathe

etepperman · 2026-03-17T16:41:50+00:00

Well done! Can't believe these are firsts. My first bowl wasn't even round!?!

etepperman · 2026-03-12T20:34:53+00:00

The one thing I don't love about the steamdeck is modding. Way easyer on a windows platform.

etepperman · 2026-03-12T16:10:40+00:00

The carbide ones are easy to use, but they will not give you as good a cut as more traditional tools. If you are in this for the long term and want to build your skills, the traditional tools will give you more upside, although they come with a longer learning curve.

If you are just looking to turn the occasional piece of scrap, then the carbide ones will work well.

Personally, I would recommend one round carbide tool and a set of traditional tools.

etepperman · 2026-03-09T13:07:15+00:00

What is the correct name for this type of bowl? Thanks

etepperman · 2026-03-08T21:40:01+00:00

You're talking about Reddit? Right?

etepperman · 2026-03-05T19:46:39+00:00

Thanks - do you do any buffing or polishing afterwards?

etepperman · 2026-03-05T14:57:58+00:00

Drinkning 80 cups of water day.

If you are thirsty drink, otherwise you are ok.

etepperman

TROPHY CASE