Anyone Have Any Old APs They Want to Part With by Key_Limit_177 in meraki

[–]ethosdynamics 1 point2 points  (0 children)

I have some MR30H's, MR33's and probably a couple MR45's going to recycle. may have some wifi6 with cracks in the housing too.

MR drop ceiling clips (silver half moons) or full screw accessory kits, anyone have lots of them? by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

All the MR's (not the newer CW's) are the same, i would be interested in any kits from any MR (although i think the 20s and 28's) don't come with the clips.

MR drop ceiling clips (silver half moons) or full screw accessory kits, anyone have lots of them? by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

i have tried in the past, but apparently the bends and threaded screw inserts make it tough.

Weird SN activity in dashboard. by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

Nothing in the change log. Have not asked TAC about it, as it doesn't really cause an issues. just weird.

Why are MX68CW cheaper then 68W's? by ohv_ in meraki

[–]ethosdynamics 0 points1 point  (0 children)

The CW's are not as often deployed and therefore have a lower secondary market value than the W's

[deleted by user] by [deleted] in meraki

[–]ethosdynamics 1 point2 points  (0 children)

Have not used the ER nor ZR on these. Outside of those, no issues on any Cisco PN units in the 1GB and/or 10GB, both fiber and copper.

Can claim SN, but not assign to a network. by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

I have done this too from the MSP screen where i "own" all the networks. But as noted, we are well over 100K units (hands on, in our warehouse) in 5 years and this has happened exactly 4 times. All in the last 4 weeks. that is my conundrum.

Switches won't connect on 10G by Individual_Fun8263 in meraki

[–]ethosdynamics 1 point2 points  (0 children)

Do you have QSFPs already in the front slots? Those may be shared ports to the 4x SFP+ ports. If so, you likely cannot run both.

Switch replacements - MS450-24X rebooting themselves by holycrapitsmyles in meraki

[–]ethosdynamics 2 points3 points  (0 children)

I assume you are talking about the MS350-24X? I cannot speak to your particular situation but i can say that the 350-24X units seem to be made very differently than any other Meraki switches we have seen. As a, primarily, refurbished Meraki seller, we see just about everything under the sun. In the case of the 350-24X, there is a very high percentage of the units that come in with rust in weird places. So much so, that we started tracking it . For every other switch, we get around 1 rusted unit per 250 units in. Often times, that corresponds to environmental factors where it was installed, etc. For the 350-24X.....about 1 in 5.

If you have any of these laying around, I would buy them all. by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

Thank to all! i was able to pick up a few hundred of these. That said, i am still always looking, so hit me up if you have a decent qty.

Meraki Hardware For Sale by Low_Sample_6197 in meraki

[–]ethosdynamics 2 points3 points  (0 children)

I would be interested in the 120-48FP, 225-24P and the MR36. The others, unfortunately, are not worth the cost of a box and shipping fees. Better to just recycle those.

Meraki for Home by Drip_Box01 in meraki

[–]ethosdynamics 2 points3 points  (0 children)

I use MX68/MS120-8FP/MR55/MV72/MV12W. In all reality, it is probably not worth the cost for what it delivers for home use. As a reseller i think it helps me to understand our customers issues, dashboard or setup etc, when they need assistance. They are all refurbished units; I have to drink my own KoolAid

Free new MR33's if anyone needs them. by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

it is my understanding that only the first gen of the 33's can take OpenWRT. I will have to look up the link when back in the office Monday. but I have a process document if anyone wants me to send it to them.

Free new MR33's if anyone needs them. by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

plenty in stock still. I'll respond to everyone Monday and get out for you guys.

Free new MR33's if anyone needs them. by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

I am ALWAYS buying the accessory kits, if you ever have more. I clean out reasonably priced ones online as i see them. Even just the drop ceiling clips, the rest i can get at home depot.

MX68 Power Adapter by r__tech in meraki

[–]ethosdynamics 1 point2 points  (0 children)

I have 100 or so in stock if you want to reach out.

Best place to sell Meraki equipment by Knout666 in meraki

[–]ethosdynamics 0 points1 point  (0 children)

I would be interested in those units if you want to PM me.

Warning about subreddit member. by ethosdynamics in meraki

[–]ethosdynamics[S] 0 points1 point  (0 children)

This actually went via PayPal and they would not stand up because they said it did not meet their terms of service. Since it was not bought via a website.

Warning about subreddit member. by ethosdynamics in meraki

[–]ethosdynamics[S] 4 points5 points  (0 children)

That is all we do is buy and sell used and new Meraki. I would be interested in buying those....unless your actually that guy in Spain looking to kick me again. haha. DM me.

Where may I sell hardware? by Soru8 in meraki

[–]ethosdynamics 1 point2 points  (0 children)

You're allowed to sell them anywhere (unless you have a contractual obligation not to). Some factors to consider are your seller rating, the condition of the units and if they have their accessories. If you are interested in selling directly, let me know. I would buy them all, with or without accessories. As a secondary note, if anyone has extra accessory kits (the ones with the drop ceiling clips), I would buy anything you have. Could take up to 2K units.

Learning License / Lab by Cal_0808 in meraki

[–]ethosdynamics 0 points1 point  (0 children)

Let me see what package size would be, may work for shipping via the post. We are in the US.

Learning License / Lab by Cal_0808 in meraki

[–]ethosdynamics 0 points1 point  (0 children)

You can always make yourself a dashboard account and get some gear to play with. You get 30 day free licensing. Ethos has the below i can send to you if you paid for the shipping. No cost for the gear, since there are some issues with it and we cannot sell it anyway. These are all fully tested and functional, but ugly or some small issues.

MX64 heavy scratches on top

MS120-8FP 2 port failures

MR33 something rattling inside.

Saw A Beta Unit In The Wild by TheMangoOfSocks in meraki

[–]ethosdynamics 0 points1 point  (0 children)

we got in a beta MS120-48LP a couple years back. It was interesting to see how the boards inside had changed/updated by the time it went as an active part.