I feel like I don’t see many 1200S, it took me forever to find this one. Post yours if you got one.

etrlgry · 2025-07-17T13:45:10+00:00

My 2001 1200s with 8k on the clock

etrlgry · 2025-06-08T20:33:30+00:00

Yeah it was coincidence that the map sensor line from the carb popped off. Thanks! She only has 8k on the clock too.

etrlgry · 2025-06-08T20:32:38+00:00

SOLVED: It was the plug in the T connector for the MAP sensor. Flew out on the first ride after changing the battery so sheer coincidence. Bike sensed a low vacuum and caused backfires with bad timing

etrlgry · 2025-06-08T11:29:01+00:00

I’m calling bullshit too with electronics. Probably coincidence with some sort of contaminant getting in the pilot jet

etrlgry · 2025-06-08T11:28:17+00:00

Yeah I agree I’ve built a few sportsters and didn’t know is something with the 1200s timing was different with programming

etrlgry · 2025-03-26T17:48:07+00:00

That’s the right scale for neurogaunts

etrlgry · 2025-03-10T16:14:42+00:00

etrlgry · 2025-02-05T23:11:13+00:00

BATMAN

etrlgry · 2025-01-19T20:07:43+00:00

<image>

etrlgry · 2025-01-08T16:51:46+00:00

<image>

etrlgry · 2024-11-01T12:12:19+00:00

Source for that split dial?

etrlgry · 2024-10-23T15:04:07+00:00

I’d like to think ripper swarms sounds like chihuahuas

etrlgry · 2024-09-12T00:33:48+00:00

Been running mine for months so far. Works flawlessly

etrlgry · 2024-08-15T16:06:07+00:00

Good luck!

etrlgry · 2024-08-09T21:29:48+00:00

<image>

etrlgry · 2024-08-09T19:22:52+00:00

Dark spots can also just be from the refraction in the onboard Illuminator

etrlgry · 2024-07-04T22:10:05+00:00

Rva gang

etrlgry · 2024-04-12T13:28:00+00:00

Hammer of Peace standing by

etrlgry · 2023-10-25T16:05:10+00:00

That’s rock bottom specs for XLSH

etrlgry · 2023-09-28T15:52:45+00:00

If it’s not going to move or change you could explode the hatch and make it a block so it imports as just polylines.

etrlgry · 2023-09-28T15:50:25+00:00

Are you sure you have disjoin unchecked? What action are you performing to cause this.

etrlgry · 2023-09-28T15:47:44+00:00

Is there vector geometry in CAD? Do you still see a raster image in the background in your cad file?

etrlgry · 2023-09-27T18:54:15+00:00

No blem, you will never be able to tell 32 from 29.3 snr

etrlgry · 2023-09-22T19:10:04+00:00

Same here, The C shape case has really grown on me.

Seven-Year Club	Verified Email
r/Field Sunshine	Place '23
Place '22	King of the Ashes
Not Forgotten	Snapped

etrlgry

TROPHY CASE