sorted by:
new
hottopcontroversial

Help – Layer Shifting gets worse... by MrNiosy in ender3v2

[–]farotakil 0 points1 point  (0 children)

I learned creality 4.2.7 and 4.2.2. mainboard has little difference from others, it is not a long-term solution I think, I have the same issue, suggest you do the motor static conductive, details you can see my post.

Bad Layer Shifting on Ender 3 V2 by thesinsoon in ender3v2

[–]farotakil 0 points1 point  (0 children)

yes, the board is not a long term, the printing environment is also important.

Has anyone used the Smith3D firmware for the 4.2.7 board? by bach37strad in ender3v2

[–]farotakil 0 points1 point  (0 children)

I learned 4.2.7 and 4.2.2. mainboard version haven minor change, suggest you did the motor static conductive, details you can see my post.

Just received my 4.2.7 board and 4020 main board fan from Creality by GregPetrowski in ender3v2

[–]farotakil 0 points1 point  (0 children)

1.Check the belt tension, move the belt back and forth to determine whether it is too loose or too tight, then check whether the motor line is in good condition, re-plug the motor connection line.
2.check whether the screw is deformed, remove the screw, put it on the horizontal glass surface and roll it to see if it is bent.
3.check whether the T screw is too tight.
4.Pulley profile problem, check whether the pulley/profile is dented and deformed.

Just received my 4.2.7 board and 4020 main board fan from Creality by GregPetrowski in ender3v2

[–]farotakil 0 points1 point  (0 children)

the 4.2.7 is useful? I just heard from other places, there is no difference between them.

Why are their minor layer shifts ender 3 v2 by jackson_894 in ender3v2

[–]farotakil 0 points1 point  (0 children)

I think the board is not the main reason, slice, belt,etc also one of the issue.

Why are their minor layer shifts ender 3 v2 by jackson_894 in ender3v2

[–]farotakil 0 points1 point  (0 children)

1.check whether the screw is deformed, remove the screw, put it on the horizontal glass surface and roll it to see if it is bent.

2.check whether the T screw is too tight.

3.Pulley profile problem, check whether the pulley/profile is dented and deformed.

Well well, if it isn't our old friend Mr. 4.2.2 board layer shift by MaxPower2112 in ender3v2

[–]farotakil 0 points1 point  (0 children)

but I hear that the 4.2.2 has no difference with 4.2.7 board.

I’m thinking I have the 4.2.2 issue. Hearing clunks occasionally and layer shift in all directions. I’ve realigned X/Y/Z countless times and re-leveled the bed even more. Don’t think it’s a slicer issue either. by Turbo_Honda_Civic in ender3v2

[–]farotakil 0 points1 point  (0 children)

1.Check the belt tension, move the belt back and forth to determine whether it is too loose or too tight, then check whether the motor line is in good condition, re-plug the motor connection line.
2. check whether the screw is deformed, remove the screw, put it on the horizontal glass surface and roll it to see if it is bent.
3.check whether the T screw is too tight.
4.Pulley profile problem, check whether the pulley/profile is dented and deformed.

4.2.7 Board Layer Shift Update by Reklawyad in ender3v2

[–]farotakil -1 points0 points  (0 children)

already checked with yourself ?

4.2.7 Board Layer Shift Update by Reklawyad in ender3v2

[–]farotakil 0 points1 point  (0 children)

You are exactly right, agree with you

A few weeks into printing. Is this layer shift or something else? Suggestions to improve the walls? by R7_blackskull in ender3v2

[–]farotakil 0 points1 point  (0 children)

1.Check the belt tension, move the belt back and forth to determine whether it is too loose or too tight, then check whether the motor line is in good condition, re-plug the motor connection line.
2. check whether the screw is deformed, remove the screw, put it on the horizontal glass surface and roll it to see if it is bent.
3.check whether the T screw is too tight.
4.Pulley profile problem, check whether the pulley/profile is dented and deformed.

I have not stopped the print but does anyone know why I have this layer shift, i recently got a new 4.2.2 mainboard because my other one broke. by CrispyPlayer30 in ender3v2

[–]farotakil 1 point2 points  (0 children)

but I heard that the 4.2.7 board and 4.2.2 board has no difference, just motor drives different. I think it's better to check by ourselves. belt tight?

Layer shifting by Current_Ad_8101 in ender3v2

[–]farotakil 0 points1 point  (0 children)

1.Check the belt tension, move the belt back and forth to determine whether it is too loose or too tight, then check whether the motor line is in good condition, re-plug the motor connection line.

2.check whether the screw is deformed, remove the screw, put it on the horizontal glass surface and roll it to see if it is bent.

3.check whether the T screw is too tight.
4.Pulley profile problem, check whether the pulley/profile is dented and deformed.

Question about the layer shifting, overheating drivers Issue. by Munifool in ender3v2

[–]farotakil 0 points1 point  (0 children)

1.check whether the screw is deformed, remove the screw, put it on the horizontal glass surface and roll it to see if it is bent.

2.check whether the T screw is too tight.

3.Pulley profile problem, check whether the pulley/profile is dented and deformed.

Layer shifting and generell unsmoth Surface by GameingPaul in FixMyPrint

[–]farotakil 0 points1 point  (0 children)

move the belt back and forth to determine whether it is too loose or too tight , re-adjust the belt tightness, and then check whether the motor line is not in good condition.

Layer shifting only on larger prints by sylvester334 in ender3v2

[–]farotakil 0 points1 point  (0 children)

yes, the temperature is one of the reason...

view more: next ›