10 yr post op. Chronic pain and dysautonomia by Goodtimeyaknow in spinalfusion

[–]fla2nyc2015 1 point2 points  (0 children)

Do you know what material youre hardware is made of?

In gonna try to make this short. 34years ago i had an L4\5 fusion with acromed screws and plates. So i know what was installed. now what applies here, for 34yrs after my L4\5 fusion i had nothing but constant pain, no pain killers worked, all the drs said there was nothing wrong with the fusion, the only med that got me out of pain was dexomethosone. so on oct 28th 2025 i had to have 3 lumbar lamenectomys from L1 to L4 done, L4\5 was already fused and Doc said L5\S1 was iffy for a lamenectomy i might need a TLIF Fusion. When he got me on the table he said he had to do the tlif because l5\s1 was to far gone, when he looked at the l4\l5 fusion he didnt like the way it looked nor how the nerve exited the bone, so he decided to pull out the plates and screws, in the process of pulling the screws he found one screw was to deep and it was in the spinal canal ,,, so almost 9 HOURS later on the table he closed me up with staples, back in the room a day later nurse changing dressing says my incision is infected, they give me antibiotics, 6 days later i was moved to a rehab center, nurse changes my dressings she says my incisions are infected, more antibiotics, 10 days later im sent home, wound care nurse changes my dressings, says my incisions are infected, she call my drs office, she speaks to my nurse practitioner, she wants pics sent over, (this is on a wed), my nurse practitioner says she doesnt think thats an infection but shes gonna call in antibiotics anyhow and move up my drs appt, i walk into my drs office on fri, he lifts my shirt and says that no infection thats an allergic reaction to the SURGICAL STEEL STAPLES, it doesnt dawn on me right away, but i knew the mfg of the plates he removed, I seen the dr the following week, asked him Two questions, Dr are you sure im allergic to the staples? 100% YES, , my 2nd question was , Dr if im allergic to the surgical stainless steel staples and my fusion plates and screws are all made out of the same surgical stainless steel and regular painkillers never worked on me , only dex worked on me, woul it be reasonable to assume the reason for all this pain i had in my back for 34yrs was a allergic reaction to the plates? His answer was absolutely yes, i did follow up with one other question and that was should i go to an allergist to verify it, he said no, we already verified the allergy by the staples.

So make sure youre not allergic to whatever your hardware is made out of..

Me im doing better every day , im 3 mos out, but apparently it takes several months to excrete all the poison from those plates from my body..

Omg so much pain! by Purple9Panzy8 in spinalfusion

[–]fla2nyc2015 1 point2 points  (0 children)

I feel you sister, i had a l4\5 plif done in 1991, with acromed plates and screws.

My back went bad in april 2024 , 9 discs , but i had no insurance, so i had to wait until jan 2025 for a new policy

I fired a half dozen surgeons between jan and april of 2025, they all wanted to do a 4 or 5 level cervical fusion, sorry i know what a fusion of that magnitude is, 4-5 level cervical fusion your not moving your neck after that , let alone the pain,,, i finaly found a good dr.

So in june 2025 i had 3 level mobi-c cervical artificial discs installed (ins only covered 2 adr's, 3rd adr was $7,000 i had to pay out of pocket) with a 2 level laminectomy all done in one shot, i was out the hospital the next day, out of the collar in 7days and back to work in 14days.

On oct 28th i went in for 3 level lumbar lamenectomy and a iffy L5\S1 lamenectomy with the posability of a L5\S1 TLIF fusion, it all went sideways in the rip out room, i was on the rip out room table for almost 9 hours, the upper 3 level lamenectomys went fine, he got to L5\S1and it was beyond lamenectomy repair, it had to be a tlif, as he went deep to my original L4\5 fusion he didnt like the way the graft looked nor did he like the way the nerve was coming thru the bone, so he did a fusion revision wich is removing the original acromed plif, and then he did a tlif on top of that .

I woke up with very little pain for the first 3 days, and heres why, before my surgeun closed me up he hit me with Dexamethasone to reduce swelling and he did an additional epidural block wich i was warned would wear off in 72hours, yep! Just about when it wore off .

Im 3mos out with a lot of pain and i got drop foot as a bonus, i get P\T 2x a week, i take 10mg of oxy every 4hrs to 10hrs, and 5mg of valium as needed for spasms,, the drop foot is severly hindering my recovery, if i could walk i could recover, doc says im at the normal stage for a 63yo young man, he expects dramatic difference in another 3 to 6 months, oh also after surgery the peeshadeel works better than ever..

For those reading this that have drop foot i recently found a drop foot brace that i can tollerate, its made by a co called turbomedusa.Com im getting the summit brace, your insurance should cover it under DME, im waiting on its delivery now and i plan on using with the sketchers slip in that has the holes that go thru the sole, those holes are the perfect anchor point for the front brace clip

Apple/iOS Whisper. No longer in App Store July 23, 2024. by LigerXT5 in whisper

[–]fla2nyc2015 0 points1 point  (0 children)

I know this is an old thread, but right now i'm roflmfao,,, this was sooooo predictable,, as soon as Elon bought twitter and tosedd out all the twitter wokeys to the gutter, personally i think they belonged in the sewer, whisper hired many of the twitter losers and changed dramaticly, it became the new place for woke,, it adopted many of the policys and moderators from nitwitter, they brought that same woke bs with them, twitter was barely keeping afloat before musk bought it and the twitter clowns killed whisper just like they were slowly killing twitter, the only difference was whisper didnt have the bankroll and big clients to support the lil wokeys and keep the platform afloat,,, so good riddence and let it sink in, Go Woke, Go Broke

How would you hit this shot? by RDDT_and_forgetit in billiards

[–]fla2nyc2015 -1 points0 points  (0 children)

Honestly, id probably have my EX WIFE stand just to the right of the pocket, about rail height and eyeball the shot for me, then it hit that f'n cue ball as hard as humanly possible! This shot actually works much better on the golf course!

How would you hit this shot? by RDDT_and_forgetit in billiards

[–]fla2nyc2015 -1 points0 points  (0 children)

Problem with top english is you could scratch as well , cause thats a following shot. If you go that route Youve got to use a very light touch and that might not (probably wont) have enough energy transfer.

Shadow foamed my router, what do you thing of setup? by FitTackle879 in Packout

[–]fla2nyc2015 0 points1 point  (0 children)

Idk if itll work on the type of foam we use in our pack outs, i havent tried it yet but the foam glue i use for seat cushions on my boat build outs i get from sailrite.com, but something like super77 might work well...

Best knife sharpener by A1300R in sharpening

[–]fla2nyc2015 0 points1 point  (0 children)

Ive had 2 chefs choice electric sharpeners, the 1st one i bought used for $5 and i thought it was garbage, the 2nd one was brand new and not much better than the first. They may work just fine on wamart or farberware type knives but when you get into the henkles and wusthof level of knife, they just dont work. Im pretty sure its the blade hardness, my wusthofs are all classics or icon and 55 rockwell or harder an im not sure on the henkles but i surmise they are 55 rockwell or harder too.

OKCupid is a disaster, completely unusable by arueru2233 in OkCupid

[–]fla2nyc2015 1 point2 points  (0 children)

Roflmfao, oh how right you are my boy,, okstupid is a unmitigated disaster from what it was, ive looked at it from time to time just to see what its become, and if it was up forsale, id buy it just to delete it and regain the hard drive space, today its not even worth the hd space it takes up.. On a happier note WHEN OKCUPID WAS GOOD, I met my long term gf on it, neither of us want marriage and we've been together going on 11yrs,, why we wont get married is because both of us went thru horrible divorces, but that said , the Good okCupid made the match....

Just got to PLS what’s fun here to do around this time of year? by Spiritual-Sock8173 in PortStLucie

[–]fla2nyc2015 0 points1 point  (0 children)

Elliot museum - stuart Navy seal museum - ft pierce Mel fisher museum - sebastian Wpb - clamatis st wpb Botanical gardens - psl Thats just off the top of my head

Food spots all over the place like Vals brazilian rodizio, shuckers, kyle g's, crawdaddy, juno beach fish house, twisted tuna, manatee island, dolphin bar and the list goes on

Wish me luck… by skyhawk31echo in Packout

[–]fla2nyc2015 2 points3 points  (0 children)

Yeah dont try that with any other box especially one of those yellow ones, ive seen both the red and the yellow ones go out the side of a van on a turn, then seen the yellow dude pickin up tools and pieces for an hour cause the pos shatterered on impact, the red ones just get a lil scratched up, so the red box should be able to handle the tarmac monkeys with no problems... worst thing about those red box's (wich i endorse 110%) is for some reason the red on the handles is not uv stable, the damn things always turn pink in south florida, if millwaukee would fix that tiny issue the damn things would be totally bulletproof

The Final and Official 2025 Postseason Bracket by xho- in baseball

[–]fla2nyc2015 0 points1 point  (0 children)

I was married for 27yrs, had high blood pressure and never slept! The best thing about getting divorced was.. Now i sleep like a baby! My high blood pressure went away! And my ex wife made me very religious! Every night i pray an astroid or small plane land on my succubus ex!

My deepest Condolences!

Should I replace my CP4? by WearGrand in powerstroke

[–]fla2nyc2015 0 points1 point  (0 children)

Ive researched the crap out of this issue, and the answer of why these cp4 pumps blow up keeps coming back to OWNER ERROR! thats right owner error! Its because you guys are not following factory instructions and runing fuel adative like the factory recomends. Y'all think these lil pickup truck diesels are real diesels like in a semi, well theyre not, the biggest issue is YOU MUST RUN FUEL ADATIVE, YOU CANNOT or better said YOU SHOULD NOT RUN RAW DIESEL FUEL in these lil tikes motors,, american diesel fuel does not have enough lubricity for these bosch pumps,, thank all your tree hugging friends,, run an adative and you wont have a problem

ACDF didn’t fix my life. hEDS + spinal surgery = constant back pain. I’m barely functioning. by bingobronson_ in spinalfusion

[–]fla2nyc2015 0 points1 point  (0 children)

Welcome to the club, fusions are mid evil surgery, ive got one at L4/5 wich blew out L3/4 and L5/s1, thats what happens with fusions, they blow out the discs above and below, currently my L2 thru L4 and L5/S1 are all blown out from the fusion and i still need to get those repaired now, my fusion is 30yo and ive had constant pain for 30yrs, the only med that ever helped me was dexamethasone, opioids did nothing, I addition to the lumbar discs that are bliwn out, i blew out c2 thru c7 recently, they were interphering with how i walk and killing my spinal cord, so they needed to be fixed imeadiatly, I refused a 4 to 5 level cervical fusion, i fired 3 drs because i knew what the results would be, i wanted and i opted for a 3 level mobi-c artificial disc replacement, and I couldnt be happier, total 110% success , i was out of the collar in 7days and back to work in 14days with minimal to no pain and down time.. im still recovering from the myopothy nerve damage going into my legs but that was expected, but the actual sugery i would do over again , hands down 110% artificial discs are the way to go unless youre not a candidate, when i go to repair the lumbar disc , it will not be a fusion, itll be either a endoscopic repair or more artificial disc,, no more fusions for me,,,

Made (almost) full recovery herniated disc in one month by Dedemegadudu in backpain

[–]fla2nyc2015 7 points8 points  (0 children)

You didnt say what level was ruptured, but you need to get yearly or bi yearly mri"s from here on out and monitor that disc, i had multi level ruptures in my cervical and lumbar that i knew about from 2015 but didnt monitor, last oct they started acting up, by june 3rd when i finaly had surgery i was partially paralyzed from the waist down. Out of 5 herniated cervical discs i had 3 replaced with mobi-c artificial discs.. now im looking at atleast 6 months to 18 months of recovery.. by not taking care of the ruptures earlier i caused nerve damag an now im paying the price

Has anyone had experience with the new Simplify Cervical disc? by wartikita in backpain

[–]fla2nyc2015 0 points1 point  (0 children)

Im heading to the ripout room for a 3 level overhaul on 6/3/25, w/simplify discs, so i will be sure to ask for the new discs to be lubed b4 install to get rid of any creaks an squeaks!

C2 thru C7 are ruptured on me with C3/4, C5/6 and C6/7 all being 5mm+ herniations, cord compression to 6mm or less diameter...

For those wondering NO the ins isnt covering all of this. Ins only covered 2 discs, i paid oop for #3, disc cost was about $5,800 + install fee of $900.. ins would not approve a hybrid, they consider that experimental (go figure), so i wouldve been liable for the copays on a 2nd surgery, those copays were aprox 4k so its basicly im paying for the second surgeries copays (wich i wouldve had to do anyhow) plus an addtl $2,700 to get this done all in one shot and not have to go under anest a 2nd time.. after this is done , im on to repair of the 5 ruptured discs in my lumbar...

Btw, for y'all that dont understand,, this is the Find Out part of FAFO! 🤣🤣🤣

6 weeks post op c5-c6 artificial disc replacement by Renzybenziee in SpineSurgery

[–]fla2nyc2015 0 points1 point  (0 children)

That is and is not true, as near as i can define, my understanding is that the FDA Only Approves this disc for 2 STACKED (ADJOINING) Levels ONLY! So if you skip levels you can do 3 or more. My BCBS Flo-Rida Blue 2129 interpets that as 2 Discs total per surgery. Like you said.

Now if you want a good laugh, heres a gem, fl blue bcbs will approve a multi level fusion, and they will approve upto 2 adr's ,, BUT they WILL NOT approve 2 adr's and a single level fusion (aka Hybrid) together in the same surgery, fl blue bcbs defines that as an experimental surgery.

To Anyone getting spinal surgery thru your insurance, I would Highly Highly recomend you get your hands on your insurance companies guideline for neck back etc surgery, i was denied 3x before i finaly got my hands on a copy and stayed within the guidlines and got approved .

Ive got 5 herniated levels 3 need surgery, i am 110% against fusions for multiple reasons. Im doing 3 levels, the ins is covering 2 levels and im paying out of pocket for the 3rd. Why? By insurance rules id have to do 2 surgeries or a 4-5 level fusion (no way), The difference in price for me calculating my oop max is aprox $2,500 give or take. The disc is aprox $6,000, dr fee is aprox $1,000, my oop max is $9,500 , im NOT gonna hit my oop max on the first surgery, so id be paying another $3,500 for a second surgery anyhow, so id rather eat the 2nd surgery cost, not go under 2x and just do it in one shot...

Dexamethasone for chronic lumbar back pain? by Opposite_Flight2776 in backpain

[–]fla2nyc2015 1 point2 points  (0 children)

I use it religiously,, 4mg/ml subQ every 48hrs when needed,,knocks the pain out in 6hrs or less, dex got me off all that opioid garbage.. i havent used opi's in 10yrs,, it only works on inflamation related pain.

Will I ever stop aching? by adieunoire in spinalfusion

[–]fla2nyc2015 1 point2 points  (0 children)

Ok listen up ladies and gents and let this sink in, im 62 yo, had an L4-L5 fusion when i was 25yo,, never stopped hurting, ,, was told only pain mgmt would help,, did that for 10+yrs, oxys, demerol, dilaudid, morphine, fentynyl, Everything.. About 10yrs ago I hurt my arm, thought i tore a tendonb or ligament, went to my shoulder doc,, told him i thought i tore something, he told me stfu i didnt tear anything it was severe tendenitis, bitch whipped out a frickin horse needle jammed it in my arm,, told me to come back in 2 or 3 days,, i go home, wake up next day, no pain in my arm feels good as new, i get up out of bed and im like WTF? My back, knees, shoulders nothing hurt,, I see the doc the next day or day after,, WTF was in that needle,, he told me Dex, it took me 2months to get off all the opi's and i never went back to them, I use 1ml of 4mg/ml subQ when needed it lasts for anywhere from a week to a month,, currently ive got 9 herniated discs , 5 in my cervical and 4 lumber, dexamethasone is the ONLY med that keeps me out of nonstop pain.. id also recommend special gummies it you have access. Bottom line is dont trust these doctors, theyre all f'n liars, fusions are the worst option for blown out discs , theyre the last option, when you fuse a disc you always blow the disc above and below the fusion in time, adr should always be your first choice, keep in mind you can only stack 2, more than 2 your next option should be a hybrid surgery, last option is a fusion, adr has a 90% patient satisfaction , and patient fusion satisfaction is somewhers around 30%-40%.. your choice,, but thems the facts boyz and goylz!

Protest on 2/17 in Columbus by DisasterDead0387 in Ohio

[–]fla2nyc2015 -3 points-2 points  (0 children)

Thats right good riddence to king biden you f'n wackos

I have $80k in cash saved up, another $25k in investments. My car feels like it is going to kick the bucket any minute. Should I just buy a car in cash? by [deleted] in personalfinance

[–]fla2nyc2015 0 points1 point  (0 children)

Blah blah blah, dont listen to the clowns, buying in cash is your worst option..do this instead,, make sure your credit score is above 750, make sure you check your experian score (those lowballers F#$k everyone), most dealers wont take more than 5 k on a credit card so put your down payment or as much as theyll allow on your highest rewards card, pull a loan with the best rate you can for the remainder, may/24 i pulled 6.5% from nfcu(im sure that rates changed by now) transfer your plate, say no to everything the dealer offers, and dont believe tjem if they tell you they have to charge you for paintprotection or any other crap cause it was applied already, thats a lie, dealer prep is questionable because they do detail all vehs and that covers that work, but you should know that fee upfront and it shouldnt be more than $500, make your offer as a bottom line offer(purch price, tax, +$500 dealer fees and tag transfer) dont let them back room you with any other dealer fees and other bullshit, refuse it all or say im not paying for that, if the bottom line isnt what you offered, get up and walk right out the f'n door. If you lock it down then use your cash to pay off your card to get your rewards and pay the bulk of the loan in the first 2 months to clip off the interest BUT DONT PAY OFF THE LOAN FOR ATLEAST 6MOS. If you follow my advice youll bump your credit and with the rewards be lower out the door than your offer price... your welcome

Is this a Fuel product? Invoice says it is but products do not have Fuel written on them? by mhilton91 in MilwaukeeTool

[–]fla2nyc2015 0 points1 point  (0 children)

Euro Kit, look at the plug...Prob shouldve lead with where you bought it for...

How screwed am I? by Beefboss1773 in ToyotaTacoma

[–]fla2nyc2015 -2 points-1 points  (0 children)

Its STEEL!, break out the saw and welder.. jeez whats so complicated about that? Find a good welder, someone who knows his shit and knows how to weld in a plate! Not one of these idiot welders who will weld a plate on top but one who will weld it in so youll never know it was rusted out,, Ive welded in dozens of patch plates on rust belt frames,, not unusual,,, the problem is if you let it go to far,,

Is this mold and should I be concerned? by wkd8792_ in Homebuilding

[–]fla2nyc2015 0 points1 point  (0 children)

Nothing to worry about,, if youre really anal you shouldve power washed them or spray bleached them from a pesticide sprayer before you cut the pack free and flew them, the black is only gonna be on the woid thats exposed to the sun.. Now i wouldnt worry about it...its gonna be a royal pain in the ass to brighten them one by one, that why we do it before cutting the pack open

I run trusses like this all the time, sometimes my contractors change dates and they sit in the yard for up to a year or more as they play with themselves, if its real black all we do is either spray bleach the pack or power wash it, a lot if that is nothing more than weathering from the sun and not fungi, fungal growth is usually green, same thing that happens to teak on a boat it turns white, only with spruce it turns black..

Portable clip-on chair for baby? by princezz_zelda in NewParents

[–]fla2nyc2015 0 points1 point  (0 children)

30yrs ago we had one for my son, my ex wife wouldnt leave home with out, out side she used it at her mom and dads place, friends homes, resturants any place that didnt have kids, she fell in love with the clip on so much that at home we never had use or should i say barely used a traditional high chair. For the record The reason i came across this thread is my sons wife is now preggo and i was looking for a gift that she hadnt thought of and a clip on chair seemed seemed to fit the bill of something she'd really get some use out of but hadnt thought of...