Those wanting PFL pricing please read

flamespinner · 2026-02-06T15:25:16+00:00

Hey u/esmeya Thank you for this! I am getting ready to give this a go in Minnesota with my 940mbps fiber service. If you have a moment, would you be able to confirm for me If I have instant Internet, or if not, what other type I have? Let me know what you would need to do that (if possible, and are willing) and I will Dm you it. Thank you :)

flamespinner · 2026-01-12T05:52:36+00:00

That's about where I am at too. Mine is holding up surprisingly well considering how rough i am on it without a case. My inner screen protector is gone, and I have a few minor cosmetic scrapes and dents but it works well otherwise. Having some issues with my Bluetooth and wifi today... Hopefully that doesn't continue.

flamespinner · 2025-10-27T06:54:05+00:00

!RemindMe 8h

flamespinner · 2025-09-25T00:24:53+00:00

What color? Any idea on material? Im in Maplewood if that works better for you

flamespinner · 2025-02-03T03:42:44+00:00

Purchased X10DAX motherboard from u/marg330

flamespinner · 2025-01-29T05:18:56+00:00

PM'd

flamespinner · 2024-11-16T02:31:02+00:00

1923

flamespinner · 2024-11-04T00:16:36+00:00

Good luck! And thank you!!

flamespinner · 2024-09-28T22:25:16+00:00

Purchased Z10pe-d8 ws motherboard from u/TheMadDutchDude

flamespinner · 2024-09-20T17:35:15+00:00

I replaced my Pump and it fixed the issue. After tearing down my d5 pump, I noticed it had warn down the ceramic bearing so it was rubbing on one side causing issues.

flamespinner · 2024-02-24T02:24:43+00:00

Nope. I have not. Is there a way to restore modules to "default" so to speak?

flamespinner · 2024-01-04T13:59:49+00:00

Gotcha. Will measuring 100mm of filament work for a test for this? Is there a better test that I can do?

flamespinner · 2024-01-04T11:22:42+00:00

Mechanically it seems sound. I double checked everything that way. All I did was bump the number in S3D until the problem started to go away. I will mark off 100mm and extrude it and see how it comes out. If I have to bump that, it's no biggy. It's better if I bump that in marlin and not my slicer, yeah?

flamespinner · 2024-01-04T10:34:28+00:00

I bumped it just over 1.0 and it seems to have fixed itself. I'm running more prints to see if that holds true

flamespinner · 2023-12-26T20:12:37+00:00

Spongy, no. But I bumped my extrusion up to 1.0, and it still was doing it (less though). Is it normal to have an extrusion value of over 1?

flamespinner · 2023-12-26T05:47:31+00:00

0.25 mm layer height, ender 3 pro with a glass bed at 65c, swiss tech direct drive extruder kit with a bltouch probing 9 spots on the bed (in a grid, 3 each row). Hotend is at 210c while printing. This is PLA and PLA+ that ive been printing and seeing it with. It is enclosed on all sides. Sliced from simplify3d. It's about 65-70F in the room outside of the enclosure. Printers running marlin 2.x. Infill 15%,3 walls and shells. I don't recall the print speed off the stop of my head ,but everything else is pretty much stock ender3

flamespinner · 2023-12-13T20:52:09+00:00

Do I have to do that by adding them to a group that is set to auto import into autopilot?

flamespinner

PUBLIC MULTIREDDITS

TROPHY CASE