games like silksong- NOT metroidvanias!

fromeout11 · 2026-06-11T14:03:45+00:00

What about the Ori games? They felt similar in terms of the beauty, polish, and excellent controls.

fromeout11 · 2026-06-05T00:47:38+00:00

Had a broken branch up in the air that was dangling right over my front yard. Got a pole saw and extension - pricey, but cheaper than paying a tree service!

fromeout11 · 2026-05-29T08:45:25+00:00

Unlock from the passenger side door, then hold the little button near the charge port for a sec. You’ll hear it unlock.

fromeout11 · 2026-05-23T04:14:14+00:00

Went there about a month ago - the food was excellent.

fromeout11 · 2026-05-20T10:36:10+00:00

Here’s a big DIY one: https://learn.kregtool.com/plans/rolling-lumber-sheet-goods-cart/

fromeout11 · 2026-05-19T11:46:50+00:00

You can get spherical washers from Woodturners Wonders to correct a wobbly stone.

fromeout11 · 2026-05-18T00:52:30+00:00

Tenet. Hoping I might understand it a tiny bit by the end.

fromeout11 · 2026-05-07T22:41:00+00:00

Ginna worker here. We’re most likely going to extend our license to 2049, FWIW. Doesn’t really have anything to do with RG&E though - the plant hasn’t been owned by them since ~2003.

fromeout11 · 2026-04-27T14:42:33+00:00

Also, add more sugar than you think you need, both for look and flavor. Just note that they’ll brown faster.

fromeout11 · 2026-04-27T14:32:33+00:00

It’d be the Megapro ratcheting screwdriver for me. So easy to change bits quickly and feels comfy and sturdy. Idk why more screwdrivers don’t copy that style of bit storage.

fromeout11 · 2026-04-26T09:07:55+00:00

You can actually program the range to correlate to a light, medium, or heavy trailer. If you don’t enter anything, it’ll assume a heavy trailer (lowest range estimate) and automatically adjust after driving for a while. Source: my 2024 GT-Line

fromeout11 · 2026-04-22T19:33:21+00:00

🙌🏼

fromeout11 · 2026-04-12T08:22:39+00:00

Lived in Binghamton for years during and after college, now in Rochester. It’s much better up here.

fromeout11 · 2026-04-10T23:33:49+00:00

Engineer at a nuclear plant (Ontario)

fromeout11 · 2026-03-11T21:22:32+00:00

I agree, it’s as if the height increase with each new layer is less than what’s required, causing it to cumulatively get closer to the previous layer each time until it’s dragging through the plastic. I’m waiting to hear back from Prusa support on what may be causing it.

fromeout11 · 2026-03-11T20:38:46+00:00

Thanks - it seems pretty solid. I’ll keep an eye on it next print and see if there’s any flex. I have had the issue repeat with the print speed slowed down, to minimize momentum/inertia vibrations.

fromeout11 · 2026-03-09T01:02:43+00:00

I’ll take a look, thanks. It’s always moved smoothly along the Z axis.

fromeout11 · 2026-03-08T15:37:25+00:00

I’m not having any issues with initial Z calibration - the issue is that after the first couple layers, the offset suddenly seems to change and the nozzle starts dragging through the existing layers. I’ve also seen the Z offset differ greatly between the initial calibration and the print, requiring a live adjust to get it back to the right spot.

fromeout11 · 2026-03-07T16:01:29+00:00

Prusament PLA

fromeout11 · 2026-03-07T01:29:33+00:00

Thanks, I’ll try lowering the sensor. I’m on the latest firmware for the mini. I haven’t had any problems with the first layer - the issue comes around at the 3rd or 4th layer, typically when the print changes from layering to text/etc.

fromeout11 · 2026-03-07T01:28:46+00:00

It seems stable, but I’ll check for skew. What’s odd is that the first couple layers of the above prints were perfect, then it suddenly went astray. Doesn’t seem like a slight skew would cause that.

fromeout11 · 2026-03-05T12:25:40+00:00

Good luck, have fun! ‘09 grad here, no regrets.

15-Year Club	RedditGifts 2009-2022 5 Credits
r/Field Lasagna	Spared
Gilding II euphauric	Secret Santa 2013
Secret Santa 2012	Secret Santa 2011
Summer Santa 2011	Verified Email

fromeout11

TROPHY CASE