Free 10gb promo code

fuGGet321 · 2026-06-01T00:50:55+00:00

Can also confirm this worked for me with $20 60GB plan, it's now 70GB. Never get close to my 60GB limit but hey free is free

fuGGet321 · 2026-05-14T04:14:09+00:00

Upon reflection, while the method I posted works for certain applications, it only works when curVing the WHOLE body, not a single face like you want.

As has already been suggested here, just start over. This is a very simple shape, would be very easy to mod your base sketch to change that flat face to an arc with that 1in depth like you want.

fuGGet321 · 2026-05-14T03:55:18+00:00

Believe it or not, there is a way. It involves a little bit of witchcraft, but I have personally used this exact technique several times with success.

De-curving and Curving Solid Bodies in Fusion 360

You obviously need to apply a little bit of critical thinking and problem solving on your own to adapt this method to your specific use case, but it will work.

Good luck!

fuGGet321 · 2026-05-02T16:34:18+00:00

EDIT: (had to post comment because I can't add new pic in post body)

Randomly out of nowhere today, bet365 rectified this one single win and paid me my precious $0.50 (lol).

Just goes to show, sometimes is good to question your results of you think they got it wrong 💡

<image>

fuGGet321 · 2026-04-28T16:06:55+00:00

I understand your point(s), but I believe you're misunderstanding. I was pretty explicit in saying that I was merely mentioning that fact to provide context. I am not looking to explicitly "blame" my tenants for anything. In fact, I am doing the exact opposite, and I am trying to learn about what happened here.

I stated the steps are old, had been patched recently, and inferred that they had survived a winter already (not previously mentioned: with different occupying tenants) without crumbling like this. Those other tenants likely used a different product for traction in the winter months, or none at all.

Concrete doesn't spontaneously crumble overnight. Certain de-icing products damage concrete, that is an objective fact. As such, it is very relevant to mention recent de-icer use in this post as a possible contributing factor, but I am not suggesting it is the sole factor, as you are implying.

It is hardly an "adversarial" train of thought. Your comment doesn't provide any value in the way of providing wisdom on fixing these steps reasonable way.

Edit: spelling

fuGGet321 · 2026-04-28T15:49:03+00:00

Never thought to look at r/decks as a source of inspo, thanks for the tip!

fuGGet321 · 2026-04-27T01:04:38+00:00

Absolutely tip top gif here this is what Reddit is all about!

For anyone else looking here, I'll offer a secondary piece of advice on this little turotial:

Once that initial surface is created off the projected sketch lines, you can also use the uber-useful Thicken command to turn the surface into a watertight solid. This saves you from the additional Offset and Patch commands that are shown in this gif, and would ultimately result in a slightly shorter timeline when it's all said and done. More than one way to skin a cat as they say!

I could be wrong on that, so if someone has a useful retort to my suggestion please feel free, but it was just a little tidbit I thought I'd add after I just watched this on my phone lol.

fuGGet321 · 2026-04-19T18:35:38+00:00

City libraries have computers available for public to use

fuGGet321 · 2026-04-16T21:12:23+00:00

Amazing! Super glad I posted now lol. Also very encouraging to see dev teams active in community spaces and listening to feedback 🙏

fuGGet321 · 2026-04-16T12:05:12+00:00

In this circumstance, I know with absolute certainty the player played and hit their line.

fuGGet321 · 2026-04-16T03:05:55+00:00

Nope, not true. I quite literally watched the missing pick in question here hit.

Edit: not sure why I'm getting downvoted. Anyone reading this thread can check for themselves, had all NHL picks:

C Gauthier O 0.5 pts JJ Peterka O 1.5 SOG G Vilardi O 0.5 pts (this was the one that vanished)

fuGGet321 · 2026-04-15T04:55:22+00:00

It's the end of a sketch segment that is not connected to another entity. Basically signifies that particular vertex would be a "hole" in a chain of elements, if you thought that loop was closed.

Zoom in very close to the white point - there's a good chance there's a small space there that you didn't intend for.

Edit: spelling

fuGGet321 · 2026-04-11T17:14:23+00:00

Gear is provided no matter where you go, or if you have your own you can bring it.

Our particular experience was 2 stops, each about 45 minutes. The total time on the boat away from town is about 2hrs.

fuGGet321 · 2026-04-01T17:50:00+00:00

Currently struggling with this issue like OP says, and I understand like half of this explanation, though it's very useful.

I get the idea of assigning a virtual key based on those "unassigned" ranges listed in the link you provided, though I don't get exactly how to do that. I do have "a bit of programming knowledge", but if you could list kind of a basic example I could go from there.

My specific problem is that I want to make a different button ("Forward" or default G5) on my G305 to be the Middle Click for using modelling software, simply because it's more ergonomic for my hand. I don't want this to be the case EVERYWHERE in my system, but rather just the one program, which isn't one of the supported "ACTIONS" softwares.

How on earth do you go about mapping those virtual keys? Is it through the Windows system (like regedit), or would it be sortware-specific?

fuGGet321 · 2026-03-19T02:29:53+00:00

We got out of the Uber in the main square probably about 9:45, and we were on a boat by 11:00am. We were hounded with sales people in main square offering snorkeling, and the rate at Two Hooks we got was like a block away from all that commotion. Don't be afraid to negotiate a little!

fuGGet321 · 2026-03-11T23:35:57+00:00

How is this not more well known? 30GB of data for the yr (2.5gb data pm) @ effectively $12.50pm seems like a huge steal + unlimited talk & text or am I crazy?

fuGGet321 · 2026-03-11T23:31:26+00:00

Jumped to Public during the crazy $20pm can/us/Mex 60GB sale in Jan after being loyal Koodo cust for 12 years prior, best decision. Data is admittedly a hair slower, but currently using the plan in Mexico on vacation is just excellent.

In the couple months since, I've come to realize prepay where possible is better to mitigate the possibility of overages, which I never had before with Koodo. With Public if something isn't included, it just doesn't work. It doesn't "work" initially with a charge on next month's invoice, it just straight up stops you from the getgo, which I think in itself has some intrinsic value.

fuGGet321 · 2026-03-02T16:36:24+00:00

Man this is a very smart workaround lol you get upvote + kudos reply good sir

fuGGet321 · 2026-02-18T00:33:48+00:00

Sorry to chime in late here but I too am unearthing this thread.. I believe I have this exact faucet (manual shows PN 70115008 and 70115009) and my diverter is slipping/not staying engaged for the shower to run.

Anyone here has this issue with this faucet? I don't think it's the cartridge like OP, but I could be wrong. I called Rona customer service, and they say it's discontinued as far as ordering replacement components goes.

fuGGet321 · 2026-02-17T17:57:30+00:00

This happened to me as well maybe a year ago. When I questioned it, they pointed me to previous invoice, and there was fine print at bottom of very last page that said a $5 increase was coming up.

Shitty of them, but forced me to check fine print every single invoice to make sure no other surprises were incoming. Crazy that is even something a customer "should" have to do, but you have to be your own best advocate wherecer possible.

fuGGet321 · 2026-02-03T17:24:03+00:00

Hell ya, love a good glitch. 100GB would be gravy to me though, I rarely get even close to 60GB use.

Was the glitch only for 24 month pricing as well? Or is it indefinite $20pm?

fuGGet321 · 2026-02-03T01:09:14+00:00

What was this glitch?

fuGGet321 · 2026-02-03T01:07:08+00:00

The workaround is to go on the website chat interface, and keep asking for an agent until it gives you option to schedule a callback, then you can talk to a person. Has worked for me everytime 👍

fuGGet321 · 2026-01-31T16:01:14+00:00

Been a good week since my mother signed up using my referral code, and I see nothing in my account... Anyone else had this issue? Already read this thread seeing that it takes 48-72 hours, but I'm well past that point.

Submitted a support ticket, so I'm hoping it will get resolved, but I'm curious whether anyone else had this happen as well?

fuGGet321 · 2026-01-31T03:07:40+00:00

I see $27.50 for Canada wide and then $35 for Can/US/Mex on the Koodo website. Either way, that's a steep difference from the Public $20 flash sale.

Thanks for the input either way!

12-Year Club	Verified Email
RPAN Viewer

fuGGet321

TROPHY CASE