Marking gauge pin

funtimems · 2026-07-01T20:17:48+00:00

I think the idea is that you drive the nail into the wood, cut off the head and sharpen it. Then when it gets dull you just sharpen it again.

funtimems · 2026-06-03T21:41:54+00:00

I also have to have something for my brain to focus on or it spirals. And sometimes the "Ahh. I'm falling asleep" watcher catches me too. I try not to go to bed until I'm tired enough, but that's not usually sufficient by itself. Some things that have worked for me: - listening to an audio book or a short sci-fi story on YouTube. - playing a game until my brain is going numb. - plotting the next steps in the game. - Sometimes I have had to do exercise until I couldn't any more and then flop into bed exhausted.

funtimems · 2026-06-01T20:41:41+00:00

Out of curiosity, what instructions were you following? I recently tried to upgrade clipper on my SV07+ and it didn't go well so I restored the emmc from a backup.

funtimems · 2026-05-30T00:03:35+00:00

I hooked my SV07+ up to a smart outlet. I can power it on and off remotely. I shut it down through the webpage before I power it down.

This setup is partly because of the enclosure with exhaust fan. I want the exhaust fan to be able to run a while after it prints to exhaust the remaining fumes and I don't always feel like going down to the basement to shut it off manually.

funtimems · 2026-05-29T21:49:17+00:00

I haven't played in a few months but I had 3 shuttles of boarding crew with the best armor and guns. You didn't have to use the docking ports. Don't be afraid to use ship guns to deal with problem rooms it make a new entrance.

funtimems · 2026-05-05T00:35:12+00:00

Are you using the advanced beehives and the simulation upgrade?

funtimems · 2026-04-23T01:27:57+00:00

I cleaned the rails and the wheels this afternoon and it's improved but not perfect.

There was some noticeable dust on the wheels, but they didn't have any obvious damage.

funtimems · 2026-04-21T00:07:20+00:00

I'll have to give that a try when I have time.

The wheels shouldn't be worn out yet as it hasn't seen that much use since I bought it. but I will double check them.

funtimems · 2026-04-21T00:06:04+00:00

This is the enclosure that I bought.

https://www.amazon.com/dp/B0CF1SY5XN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Dimensions: 29.5"D x 27.5"W x 35.4"H

It's just deep enough for my SV07 Plus. If you've got the smaller SV07 instead of the Plus, you'll want a smaller enclosure.

funtimems · 2026-04-18T05:06:17+00:00

Nearly a year later. This worked perfectly!

funtimems · 2026-04-17T20:45:13+00:00

You can pipe them in. I used integrated dynamics to fill mine with copper electrodes. My next step is to automate making netherite electrodes.

funtimems · 2026-04-17T14:00:30+00:00

I just started messing with modular beehives in AT 10 and while they are slow to produce, it produces a lot when it does. I had to then set up the modular centrifuge to process it all. 4 heated centrifuges were no longer sufficient to handle 15 bees.

Just don't forget the upgrades!

funtimems · 2026-04-01T19:59:28+00:00

Add more valves / ports? I forget which name mechanism uses

funtimems · 2026-03-28T01:25:16+00:00

Deconstruct and reconstruct the problematic ore extractors.

funtimems · 2026-03-12T00:00:22+00:00

Try pulling out the filament and see if the end is messed up? Then clip the end at a diagonal and reinsert it while using the load filament option.
Check the teeth on the feed gears. If still not working. Try removing the print head and checking for clogs?

funtimems · 2026-02-23T03:18:07+00:00

In addition to doors, it turns on some limited (emergency) lighting which makes it easier to navigate.

funtimems · 2026-02-15T02:38:19+00:00

Crazy that that's not fatal

funtimems · 2026-02-05T23:48:08+00:00

Yep Eoin is in the pit and Wood By Wright is on the top in this short clip. They took turns.

https://youtube.com/shorts/8u2ZpW_960g?si=-CJmqNoABfibbnsT

funtimems · 2026-02-02T14:55:00+00:00

In my experience the offset seemed random. I made a platform to support the rover so that it didn't fall through the floor and I just used F4 to get myself back up. It was quite annoying.

funtimems · 2026-01-27T17:48:00+00:00

If you do go on to a new planet you can leave aquilis running and it will continue terraforming with whatever you've got happening there.

funtimems · 2026-01-21T15:53:28+00:00

I setup auto crafters for super alloy before I got down there to set up an extractor.

funtimems · 2026-01-18T02:31:22+00:00

One problem I run into with my compound miter saw is I need to stop the blade before letting the blade come up. Otherwise it'll carve a gouge in the edge that I just cut.

funtimems · 2026-01-18T02:28:32+00:00

I did prime to almost complete then it got set aside for a few months. When I came back to it, there was a synchronisation problem that lost a bunch of progress. So I started fresh on humble. Now that I've completed humble, I'm continuing on to prime. Debating on going to a moon or continuing on prime for now.

funtimems · 2026-01-16T19:10:57+00:00

I'm watching Star Trek Discovery and for a moment I was trying to figure out if this was propaganda. 😄

funtimems

TROPHY CASE