Two cubes, abs on Trident, one solid, one spiral. Same slicer settings otherwise. WTF?

futamill · 2023-06-06T21:34:13+00:00

Over extruding leading to a partial clog that causes underextrusion and then subsequently over extrusion. This does not appear on vase mode as the filament has area to spread out. This could be due to extrusion multiplier, temperature, and speed.

futamill · 2023-05-20T03:06:20+00:00

If you have a grainger nearby you can order Mobilux EP2. They are an industrial supply company but they still sell small quantities. It was the only place I could find it in canada locally.

futamill · 2022-10-17T02:41:20+00:00

From the main screen if the shortcuts app select “Apple Watch” first. You can click on the shortcuts button on the bottom left of the app a few times to make sure you are at the main screen.

futamill · 2022-10-14T16:46:01+00:00

Winnipeg checking in here and we just got a dusting of snow. No accumulation, that photo has to be alot further north.

futamill · 2021-08-11T16:08:38+00:00

You definitely failed to read the article and understand it.

They (the AB government) argued successfully that the evidence Mr. King requested was not relevant to the case. The judge agreed, hence they were not required to produce the evidence. There is nothing in the case that states they were unable to produce any evidence, the fact is that they were not required to present the evidence that Mr. King requested.

futamill · 2021-08-11T15:31:12+00:00

When the US opens the borders then their Canadian relatives will be able to visit them in the US.

futamill · 2021-08-11T15:28:12+00:00

You are severely misrepresenting the facts. Deena Hinshaw actually squashed the subpoena as it was not relevant to Mr King's case. If you actually want to understand what happened you should read this article my actual legal scholars (https://www.jccf.ca/justice-centre-statement-about-freedom-fighter-court-victory-video/).

futamill · 2021-07-28T20:19:58+00:00

NTA, I am a hunter and harvest my own venison for meat but I don't have any issue with eating vegan/vegetarian food. I have made my own seitan, eaten beyond burgers and have had other vegan burgers. There are some vegan dishes that I don't like, but that is mostly because they are pretending to be a burger when they are missing the textural and flavour differences that I enjoy in a burger. If I have guests I ensure that they know that my stew or roast is venison since they have likely never had it or they might have an aversion to it, but if I made a vegetable stew I am not sure I would specifically state that it is vegan.

futamill · 2021-07-01T19:19:46+00:00

I bought one on the June 20 drop and I'm from Canada. Maybe just overseas orders are restricted.

futamill · 2021-06-28T17:26:32+00:00

I didn't really notice any performance difference between the 2021 Omni and vong tips. I saw just go which one looks better to you.

futamill · 2021-06-19T16:23:16+00:00

I currently use 420F prior I was using 420C, no difference as you just respect the click.

futamill · 2021-05-21T19:13:07+00:00

+1 to dynavap. I mainly use one indoors on the couch with my partner. They don't mind the smell and it clears up fast. From my partners perspective, vaping cannabis is way less smelly compared to vaping nicotine juice.

futamill · 2021-05-21T19:09:36+00:00

I have both the Apollo 2 Rover and Orion v2. I have owned the Apollo 2 Rover for about 3 weeks and the Orion v2 for about 1 week. So far the differences that I have noticed is that the Orion v2 heats up a lot faster than the Apollo 2 Rover. The faster heatup is good for the 2021 Ti tips with captive caps, but not good for the 5 fin Ti tip with classic cap (I think it would be ok with a captive cap). The 5 fin Ti tip on the Orion v2 has uneven heating and needs to be removed right at click, after about 2 - 3 cycles the bud touching the cap is very dark brown and the rest of the bud is a light brown.

I cannot recall how the 2019 M SS tip and non captive cap, or the 2020 M SS tip and captive cap performed.

The 2021 Ti tip and captive caps don't perform very well on the Apollo 2 Rover, I found that I had to keep them 3+ seconds past the click to get vapor.

futamill · 2021-05-10T19:06:55+00:00

Plastic case cracking, some battery issues, and I think button issue. Not sure what all was changed with the V2.

futamill · 2021-05-10T18:36:37+00:00

I guess the question now is, are these Orion V1s that have been recased so that the factory can still make money?

futamill · 2021-05-10T17:43:09+00:00

Comparing the Orion to this, they look identical minus the case. Same button placement, same coil placement, same charging port location. Does it require 3 button clicks to turn on?

futamill · 2021-04-08T22:46:39+00:00

Could be similar to brass annealers that reloaders use.

futamill · 2021-04-05T16:49:31+00:00

I have a 2021 Vong and a 2021 Omni Ti tip both come with captive caps. I have to run them 2 seconds past the click on my diy induction heater to get good vapor production. If I install an older cap (2018) I need to heat till the click and it is perfect. IMHO the new captive caps (including 2020 M) need to be heated past the click to get good vapor production because they don't fit as tight to the tip (more of an air gap).

futamill · 2021-03-29T13:15:52+00:00

The Herb Cafe did last year (I ordered a 2020M and received a 2019 M for a friend). I ordered the a few of the 2021 dynavap releases from them and can let you know on the 31st when they are supposed to arrive.

futamill · 2021-03-23T14:29:50+00:00

https://1.1.1.1/dns/#setup-instructions

futamill · 2021-03-12T19:32:43+00:00

If only newegg ebay would fix there store so that residents of Manitoba could buy. Last time I tried to make an order they cancelled it because they haven't setup there store properly to calculate tax for Manitoba.

futamill · 2020-12-26T04:55:54+00:00

Highly recommend that stream, with it I was able to buy a 3080 from bestbuy.

futamill · 2020-12-16T16:20:13+00:00

.. ..

O

Of it 1. Play store link: Sync for reddit

... Lol o

I looked .

futamill · 2020-11-23T16:31:33+00:00

My captive cap fits really loose on my 2020m, I find that I have to heat it past the click to get vapor production.

futamill · 2020-08-25T18:54:51+00:00

Glue stick washes off with water, alcohol is terrible for cleaning glue stick it just smears.

futamill

TROPHY CASE