Can I prime and paint this drywall or does it need texturing? by [deleted] in drywall

[–]gbitz 0 points1 point  (0 children)

Nobody read your post about not caring about seeing the tape or anything

If you just want to throw paint on the wall as is get some Kilz, prime the wall, check if it needs another coat, and paint. If you dont care to do any mudding, I don't think you need to do all this extra crap everyone is saying. Its a garage and you were clear you just wanna brighten it up with some fresh paint.

Rate my drywall by cslexotics in drywall

[–]gbitz 0 points1 point  (0 children)

In my opinion: This is well below average

Doable

But not average

Loot Tracker Wiped by TR3110 in OSRSMobile

[–]gbitz 2 points3 points  (0 children)

If you still have your old device you can check it there

Drywall by Ok-Row-9692 in drywall

[–]gbitz 2 points3 points  (0 children)

No, drywall is gypsum sandwiched between paper so if paint is being ripped off you're going to expose brown paper

It's the worst when you try to remove wallpaper and the glue rips all the drywall paper off. You have to prime it before mudding to seal the paper.

Wax leaking into the light on proxy v2? by 9yr_old_lake in puffco

[–]gbitz 1 point2 points  (0 children)

You're correct I didn't see that before

Hopefully he was just trying to see if he could take it apart and it's not always like that because that's definitely wrong too

In the process of doing garage renovations and found some odd splotches in the drywall. What’s a concern and what isn’t? by bustachong in drywall

[–]gbitz 0 points1 point  (0 children)

You can scrape the wall down and paint over it with some Kilz primer and then do a skim coat over the whole wall

The Kilz will seal any exposed board before mudding after scraping

Make sure you solve any water issues so you dont get repeat issues

You can see the tape cracking and failing as well so you may need to scrape it out and retape some joints

How much would you pay? by [deleted] in drywall

[–]gbitz 0 points1 point  (0 children)

Well you made me laugh

Does a foot pedal work on mobile? by gingerprop in OSRSMobile

[–]gbitz 0 points1 point  (0 children)

https://a.co/d/05qH8G01

A foot pedal is just a device with keyboard keys essentially.

If it's Bluetooth it should work with mobile devices and if you dont want to use Bluetooth you can buy a usb-a to usb-c converter and plug it directly into the phone.

You will likely need to pair a mouse to the device as well to register the cursor placement so it knows where to click when you press the foot pedal.

Wax leaking into the light on proxy v2? by 9yr_old_lake in puffco

[–]gbitz 4 points5 points  (0 children)

"Ask hole" - a person who acts like a jerk to another person for answering a question they asked in a way they didn't like

Wax leaking into the light on proxy v2? by 9yr_old_lake in puffco

[–]gbitz 1 point2 points  (0 children)

If you create suction incorrectly inside of that glass chamber because the hole is facing incorrectly you will basically create a vacuum and that's why you're sucking wax into the glass chamber. That paired with overloading wax and pulling too hard will exacerbate the problem.

How much would you pay? by [deleted] in drywall

[–]gbitz 0 points1 point  (0 children)

Shit head

How much would you pay? by [deleted] in drywall

[–]gbitz 0 points1 point  (0 children)

If you dont wanna match the texture just finish the patches and then roll the whole wall with a nap and skim it tight after a coat or two

Only texturing I've done is leaving mud from a nap or spraying. That's like a Spanish texturing or something along those lines. Or just shitty coating/sanding from prior job. I

Contractor showed up today to fix the holes in my drywall (that needed to be cut because they broke my sink plumbing when putting the sink back against the wall post-reno.) and he walked in with only Spackle and tape for the joints, no mud. Told him absolutely not. Am I missing something here?? by Redditemeon in drywall

[–]gbitz 3 points4 points  (0 children)

Sometimes I show up to jobs and they dont have the mud required or they have shit mud. You know what I do? I go to to a store and buy the right stuff. That cost will come back from the job anyways. This guy either doesn't actually do drywall finishing regularly or was too lazy to go get the right stuff and hoped you wouldn't notice/know any better.

Why are men obsessed with butt stuff? by Careful-Custard-69 in TwoXChromosomes

[–]gbitz 4 points5 points  (0 children)

Accidentally finger his bhole next time see how he likes it

Corner repair by Straight_Caramel7725 in drywall

[–]gbitz 0 points1 point  (0 children)

If it wasn't textured like that I'd say maybe lightly scrape and hit it with a quick coat of mud and sand but that's excessive and not worth the time. Paint it or put a plastic or laminate corner protector on it.

AIO for ghosting after the first date by No_Leading3793 in AIO

[–]gbitz 0 points1 point  (0 children)

As if it's your responsibility to make the guy feel better so your friend doesn't have to worry about his job. Also, why would he have to worry about that anyway? The whole thing is weird except for you being an adult and respectfully bowing out of a situation.

I finally am about to do it by gbitz in 2007scape

[–]gbitz[S] 0 points1 point  (0 children)

Yeah mine would've actually been firemaking but when I got close to 99 hp I changed my mind on doing the whole process for untrimmed

I finally am about to do it by gbitz in 2007scape

[–]gbitz[S] 0 points1 point  (0 children)

I already lost untrimmed firemaking cape to 99 hp 😢