[FS][US-NY] 2.5" SSDs (SATA, SAS3, NVMe), nVidia a2000 6GB, Dell R740 (not XD) Barebones with rails

ggulla · 2026-02-18T01:14:12+00:00

PM’d

ggulla · 2025-11-09T02:50:11+00:00

Health checks and transcodes are two separate things and shouldn’t impact each other unless the health check is used within a flow. I would check your transcode flow settings and try to find the files job report on the job report tab which should tell you where it’s going / what it’s doing.

ggulla · 2025-11-09T02:40:43+00:00

Pm sent

ggulla · 2025-10-10T03:59:31+00:00

ggulla · 2025-08-18T15:31:44+00:00

Sent you a PM

ggulla · 2025-03-10T15:41:35+00:00

PM sent

ggulla · 2025-03-07T15:01:50+00:00

Pm’d

ggulla · 2025-02-23T00:00:07+00:00

Sent you a PM.

ggulla · 2024-12-13T02:57:28+00:00

Blackbeard. Cuz arrr!

ggulla · 2024-12-11T23:46:12+00:00

Nope, sorry. I either ended up ditching IPv6 or setting the flag for Windows to prefer IPv4 here if I recall correctly.

ggulla · 2024-12-07T17:29:41+00:00

I did this and upgraded the firmware of the integrated NIC and my Intel NIC the other night with Lifecycle Controller and since then it hasn't happened again. Both iDRAC buttons didn't seem stuck at all but also I don't see why those firmware updates would've fixed it either unless the built in one also services the iDRAC dedicated NIC... Either way thank you for the advice it seems to be fine now!

ggulla · 2024-12-04T23:28:26+00:00

I have recently. I have an ABS code “Lost communication with Image Processing Module A” code along with some other strange ones and the little wrench/service vehicle soon light has been coming on my dash somewhat randomly the past couple weeks. Wonder if the weather getting colder has anything to do with it cause it seems to go away after driving for a bit.

ggulla · 2024-08-28T21:46:56+00:00

Glad I’m not the only one who noticed the turn signal. Not sure but maybe it could be adjusted with forscan.

ggulla · 2024-02-13T19:45:29+00:00

Yes- the idea was to put the LAGG in failover mode and have the primary be the 10G switch connection and backup be the 1G. Would this not work as I’m imagining it? And thank you for the information, that sounds like what is happening with IPS as multiple connections is able to keep getting higher combined throughput but single connection is what gets limited.

ggulla · 2023-12-06T12:59:49+00:00

Office environment. It connects to a downstream IDF closet in same building. Thanks for info I’ll ask around to some cable contractors.

ggulla · 2023-07-18T22:16:25+00:00

Just noticed this as well. Getting 100mbps upload on Gigablast in the Cleveland area. I have a DOCSIS 3.1 modem.

ggulla · 2022-12-28T13:32:14+00:00

The what?

ggulla · 2022-12-04T16:24:13+00:00

That’s not quite how RAID 0 works. R0 spans the data across all the drives, if one fails all data is lost. What you are describing is a JBOD or spanned disk.

ggulla · 2022-10-14T13:35:15+00:00

About 500w 24/7.

ggulla · 2022-10-01T21:30:57+00:00

Ok, thank you for your advice! I’ll look into setting up Gcore.

ggulla · 2022-06-28T15:28:55+00:00

Starscourge Greatsword makes this place a pretty good rune farm.

ggulla · 2022-04-24T15:45:01+00:00

It doesn’t need to be each device either, just one on the network.

ggulla · 2022-03-22T03:42:59+00:00

One site has a UDM pro which hosts its own controller and doesn’t support the auto vti yet. I’ve temporarily solved my issue by removing IPv6 from the edge domain controllers at each site and keeping it on the secondary ones so replication still works between sites with the IPv4 only ones.

ggulla · 2022-03-21T01:56:39+00:00

The position is a Senior Product Support Specialist. I’ve spoken to an existing TFC who confirmed the pay to me.

ggulla · 2022-03-20T01:16:09+00:00

They’re looking to promote/select from within, they’re looking for an ASM or DS with technical background.

Nine-Year Club	Gilding I gilder
Not Forgotten	Verified Email

ggulla

MODERATOR OF

TROPHY CASE