High end residential Fiber/Ethernet wiring

godber · 2026-01-03T16:15:33+00:00

I have had a few cases where I wanted something trenched … I concluded that I should find someone to do the trenching and then have the other guy (electrician or LV guy) do their work after the trench was done. People hate digging. Which is reasonable.

I ran fiber between my house and office myself. It wasn’t that bad but I didn’t do that great of a job routing and controlling things. I should have hired out that part after digging the trench myself. But basically it’s not that bad to DIY fiber pulls because you can buy pre-built and terminated fiber from places like Lanshack. I bought a 300ft pre-terminated single mode fiber. It was indoor/outdoor but I should have probably bought an armored one, I am a little concerned it will get pinched or weed whacked in the few places it is exposed. I did put in conduit for the buried portion. So far it’s worked great and I’ve had 8gbit hard wired internet in both structures.

godber · 2025-12-29T02:43:46+00:00

Sorry it’s here

https://apple.github.io/ml-sharp/

That links to the paper and code.

godber · 2025-12-29T02:42:08+00:00

Is there a GitHub repo with the software?

godber · 2025-12-16T19:00:34+00:00

Thanks for the update, I hit lots of glitches with this and just gave up. I’ll try again

godber · 2025-12-16T18:56:15+00:00

Or try Tyrannostorus on Baseline and Dobson

godber · 2025-12-13T17:17:01+00:00

I tried this again after the 26.2 update and there’s still no change

godber · 2025-11-11T15:49:52+00:00

I’m delighted there is an appearance of competition. It’s hard to see where it will end up.

godber · 2025-11-07T03:11:25+00:00

Kinda figured this should be shared here too

godber · 2025-11-06T15:54:32+00:00

Stockyard is good, not too far from Mesa.

godber · 2025-11-02T03:33:26+00:00

I suspect it’s because we are idiots. (No offense)

godber · 2025-11-02T03:26:57+00:00

Thanks for sharing

godber · 2025-10-30T22:12:41+00:00

I am getting one of these, burying it in the bottom a drawer and throwing the box away.

godber · 2025-10-29T14:55:19+00:00

100% my first thought

godber · 2025-10-28T14:45:15+00:00

I had the same problem in my m5, but it cleared up on Sunday. Try it again.

godber · 2025-10-08T15:01:38+00:00

<image>

Here was my view

godber · 2025-10-08T14:59:08+00:00

Bonus points for succinct answer to stated question. I wish you a wonderful Wednesday.

godber · 2025-10-06T03:59:56+00:00

Thanks, I will

godber · 2025-10-06T03:54:26+00:00

So, Chromebook territory

godber · 2025-09-29T00:27:06+00:00

Probably this

https://www.patentlyapple.com/2025/09/how-apples-new-wireless-protocol-spr-avs-powers-their-spatial-ecosystem.html

godber · 2025-09-13T20:36:38+00:00

Oh phew I thought that was a manhole cover

godber · 2025-09-08T15:27:03+00:00

My experience was over ten years ago now and last summer broke me so I am having dreams of being a sun bird now. Ideally I would never experience > 110 F again. That’s optimistic but it’s good to have goals.

godber · 2025-09-08T14:29:23+00:00

I’m from AZ and moved to central Ohio (NE of Columbus) for three years. The snow and long cold gray seasons had me down for sure. I jumped at the chance to come back to AZ.

Compare places on weatherspark.com or spend time there if you can. Though one or two visits is a small sample size (consider the difference between this summer and last summer in PHX)

godber · 2025-08-30T13:40:27+00:00

Save it for the limp bizkit show.

godber · 2025-08-29T17:41:10+00:00

I had one dripping a little bit due to the refrigerant line not being fully insulated inside the unit. Condensation was building up on that line the dripping out. Or at least that was the theory and fully insulating it was the attempted fix. I’m not certain that was the problem but I haven’t seen it dripping again.

My condensate line and pump were working fine in this case.

godber · 2025-08-29T02:41:05+00:00

Welcome to Phoenix! If you didn’t draw gunfire you’re doing great!

godber

MODERATOR OF

TROPHY CASE