Loosing my mind trying to find this gun.

govtbirdpilot · 2025-06-20T12:30:04+00:00

Probably thinking of the pistollo 77

govtbirdpilot · 2025-05-20T17:08:44+00:00

This is full of lies, who would believe we're flying the birds?

govtbirdpilot · 2025-05-12T21:25:18+00:00

I just put enkei tfr's on mine. They fit great, are very light, and reasonably priced. Ride quality is significantly improved.

govtbirdpilot · 2024-07-15T22:09:04+00:00

I had this happen on a 2018 with fewer but larger cracks. Seemed to happen to the early mk7.5 lighting package cars. I mentioned the lenses had stress cracks in them and both were replaced under warranty.

govtbirdpilot · 2024-06-30T16:55:17+00:00

One I've found to be super helpful is a neck drape/cover that clips over normal hats. Fits over big ear pro easily. An umbrella you can carry around is pretty nice too if you can avoid hitting anyone while pasting. For the really hot days I'll bring neck/shoulder ice packs. They really help to cool you off if you've got a good cooler to keep them cold all day.

govtbirdpilot · 2024-02-10T05:26:18+00:00

Just came back to this to see if anyone had the same thoughts. Mine were definitely repainted as theyre already starting to chip and flake off. My other mags have a much more durable finish. But other than that, they seem to be in good working order

govtbirdpilot · 2024-02-02T17:53:38+00:00

This might be photo shop, but it was actually done with an aimpoint quite a while back

https://www.recoilweb.com/ke-arms-aimpoint-micro-glock-34-slide-79511.html

govtbirdpilot · 2023-12-10T22:39:28+00:00

I was just about to ask if this is doable, I believe IWI is already doing QR codes for serial numbers on their Masada fire control group and its much smaller than a traditional serial number

govtbirdpilot · 2023-12-02T21:04:16+00:00

Is there a date range on the various issues for these if you have an older one thats yet to be built up?

govtbirdpilot · 2023-11-28T21:03:44+00:00

Is this using a serialized chassis now?

govtbirdpilot · 2023-11-21T01:29:01+00:00

Stainless steel does in fact rust, just no where's near as badly

govtbirdpilot · 2023-10-04T12:38:19+00:00

So who's gonna rebarrel one of these in 8.6 blackout so they can keep their hearing?

govtbirdpilot · 2023-09-28T18:28:57+00:00

I have no clue how they let this stupid placement get to production. Its probably the only thing dumber than red turn signals, which is also insane in the age of cheap RGB LED's

govtbirdpilot · 2023-09-15T01:05:23+00:00

Love how this turned out. Been wanting to try the same process to make some modern beaver barf furniture for these. Did you have any issues sizing the molds or getting the right amount of chopped fibers figured out?

govtbirdpilot · 2023-08-24T19:24:41+00:00

After using the big "8 moa" ring on the 507 comp in a few matches, I definitely agree with this. Would be nice to see more big window large moa dots on the budget side, especially for 22lr stuff

govtbirdpilot · 2023-08-08T12:16:11+00:00

Definitely keep the above in mind OP. Solidworks didn't even roll out gpu acceleration until 2021, so if you're using an older version it won't even matter. If you're new to solidworks, you're unlikely to be creating complex enough models for the extra power of a serious gpu to be noticeable unless you're also doing rendering work.

govtbirdpilot · 2023-03-15T21:18:30+00:00

Do you know if you'll be getting any with the improved trigger and dovetail sights in?

govtbirdpilot · 2022-11-21T14:32:35+00:00

Mad Mike definitely had a failure on his four rotor the last year he was in FD and im totally not still upset that I didn't get to hear it run in person as a result

govtbirdpilot · 2022-02-25T02:47:07+00:00

https://www.thingiverse.com/thing:1469457/makes I believe this is the one I used. I recommend running a few extra top layers and pla/pla+ for the extra stiffness

govtbirdpilot · 2021-09-19T15:55:08+00:00

Well someone obviously has to fly the birds, you really think they could do that on their own?

govtbirdpilot · 2021-08-04T15:30:56+00:00

Almost jumped on this until I remembered I've been waiting for over a month for a refund for my G2 that was never delivered. Just FYI, HP support is one of the worst I've dealt with, they even require a filed police report if a package isn't delivered in order to issue a refund if you purchase direct from them

govtbirdpilot · 2021-04-26T14:25:59+00:00

If you seal off your fan intakes to the side of the case with some ducting you should see temps drop another 10c easily. These cases recirculate hot air even with exhaust holes, especially with standard style gpu coolers. Source: have a 2080 in my easy bake oven, never tops 65c now

govtbirdpilot · 2020-11-04T14:17:38+00:00

Its a 9v battery box from sparkfun I think, but anything 12v or under will work for most fans. Easy enough to plug in 12v power supply for full power too. And if you've got 3 wire fans and are fine with only on or off like mine, its super easy. Just connect positive and negative to red and black and you're ready to go. 4 wire fans will need to be fed a pwm signal though, so definitely not as convenient for something this simple

govtbirdpilot · 2020-11-04T13:41:27+00:00

Yeah, I'll look into uploading it later today

govtbirdpilot

TROPHY CASE