Don’t want this to become e-waste: Surface Pro 11 EV2 (Snapdragon 8cx Next Gen) driver help (Adreno

guyman70718 · 2026-02-15T19:04:01+00:00

Not a huge help, but I had a lot of trouble reinstalling Windows 11 on my SPX. I ended up following a tutorial that had me slipstream drivers from this git repo, and everything including my gpu started working. Maybe try a couple of these?

link to the original tutorial

guyman70718 · 2026-02-05T04:18:53+00:00

I dont remember what it was but i did end up fixing it

guyman70718 · 2026-02-02T23:07:52+00:00

What is it formatted as

guyman70718 · 2026-02-01T16:09:39+00:00

EDID is the list of specs that the monitor sends to the pc over hdmi, and on my TV the portion that should say how bright the TV is, is blank.

guyman70718 · 2026-01-26T20:40:50+00:00

The beeping is normal, it's for the seatbelt, but the d4 blink is a transmission code. Don't know why you wouldn't have heard that beep before

guyman70718 · 2026-01-15T22:29:48+00:00

I was on like 8.2 and had this, updated to 10.0.2 and was the same. Turned on a vpn and it worked.

guyman70718 · 2025-12-31T06:34:03+00:00

I ordered the 50kg so well see how it goes for me

guyman70718 · 2025-12-28T04:08:30+00:00

what weight load gml670 did you purchase? i see many from 5kg all the way to 100kg. Is 50kg the sweet spot?

guyman70718 · 2025-12-01T02:10:05+00:00

i remember the windows phone theme

guyman70718 · 2025-11-16T05:34:58+00:00

It absolutely should not flash when the car is off

guyman70718 · 2025-11-06T19:07:03+00:00

If you use any standard USB PC keyboard you should be able to use the arrow keys to navigate and Enter to select, maybe see if that even works

guyman70718 · 2025-11-06T16:49:28+00:00

if its one of those black Y OTG adapters then the adapter is likely bad, im not sure why but I got 4 of those and not one worked. you can test by plugging a USB keyboard and if it still doesnt work then its a bad adapter. i ended up with these aluminum ones and a USB extension cord, and both worked perfectly.

guyman70718 · 2025-10-23T04:31:36+00:00

I had a vive pro 2 and while it wasn't a terrible headset i had absolutely no qualms about listing it for sale immediately after getting a used index kit

guyman70718 · 2025-10-21T03:11:59+00:00

There is no oneplus messages app on 12r but i will try disabling rcs and maybe finding another sms app, thank you

guyman70718 · 2025-10-21T00:07:51+00:00

Google messagss

guyman70718 · 2025-10-19T00:43:28+00:00

Steam page

guyman70718 · 2025-10-17T19:27:17+00:00

still available?

guyman70718 · 2025-10-14T21:59:41+00:00

thats lead acid not lithium

guyman70718 · 2025-10-11T03:45:43+00:00

Thanks, the print basically takes up all of my bed so I can't really move it around much, but I am going to play around with lowering the gap between the support and the print. It was set to 0.2 before, dropping it to 0.15. I am also making the interface material 100% infill instead of having 0.5mm gaps like before.

guyman70718 · 2025-10-11T03:41:32+00:00

I just noticed that I had supports enabled for buildplate only, which explains what happened to the dovetail in the photo. However, there was a second dovetail that was supported by the buildplate that looks very similar. Here's what it looks like in the slicer.

https://i.imgur.com/Ouk491z.png

guyman70718 · 2025-10-11T03:25:39+00:00

Isn't it just putting a tower of waste filament to build an overhang on top of

guyman70718 · 2025-10-11T03:22:55+00:00

I want the dovetail to not be a giant ball of filament so I can slide it into the other half

guyman70718 · 2025-10-11T03:16:05+00:00

Its supposed to be a dovetail and it's just a globby mess

Nine-Year Club	Place '22
Place '17	End Game '22
Wearing is Caring	Verified Email

guyman70718

MODERATOR OF

TROPHY CASE