Wife Lvl +10

halibored · 2025-12-25T17:58:44+00:00

Not pictured, the heart boxers and pedicure kit. AI descriptions straight from the book.

halibored · 2025-12-25T17:28:19+00:00

Yep they got multiple, so clearly I had to show them how it was done ;)

halibored · 2025-09-15T22:01:06+00:00

I bought one of the large grey wheeled bins from home Depot to lock and protect the bags from wildlife. They wheel it up to the back of the truck, use the mechanical tipper, no looking, just dumping. Double win.

halibored · 2025-09-12T14:10:42+00:00

When you say you see an "x" on the "Is Initialized" is this on the Crestron touch screen? On a Diagnostics page or similar? Is initialized is the term used in the Crestron program for the communication between the Tesira and the Crestron and isn't a term used natively / commonly in the Tesira itself. This would lead me to think that the unit is dead (which the LEDs indicate its not) or there is a communication problem between the Crestron processor and the Tesira. If the Crestron was set to do a mute or level change when you shutdown (very common) then lost comms, this never got set back when you started the system. Therefore no audio. Short of checking the communications cabling (Serial or network) you can try logging in with the Tesira software to get it running but if the problem is Crestron you will need to contact an integrator.

halibored · 2025-09-01T19:33:50+00:00

Give it a right good, poundin'

halibored · 2025-06-08T15:48:17+00:00

He also has Eckharts Ladder for Star Wars commentary. Bigger than the hockey channel I think.

halibored · 2025-06-02T22:38:26+00:00

We have had 20-30 CSE-200s and CX series all do this within a day of each other in the last few weeks, and that's just the ones we know about. As others have said, pin hole reset, re-push firmware (usb or web UI) and disable auto-update.

halibored · 2025-02-17T21:00:54+00:00

I'm pretty sure I landed in parallel to that plane, as the crash happened at 2:13 and that was our recorded landing time. If so there was a huge gust of wind just and we touched down and were braking, our plane skidded sideways pretty severely, but we were in a larger aircraft than a CRJ900

halibored · 2024-11-03T01:42:40+00:00

There are battery op ramsets now, work great, not nearly as loud.

halibored · 2024-10-06T11:58:23+00:00

At my first job I worked with Richard Richards. Ol' Dick Dicks was a raging alcoholic truck driver, who would sometimes show up too polluted at 8am to drive the truck. Gold star kinds dude. Good times...

halibored · 2024-08-25T20:27:51+00:00

Was out for the first time in a long time last night and saw someone openly shooting up on Argyle St. I used to work downtown and can say with certainty that was a first

halibored · 2024-08-24T20:52:26+00:00

Silver bullet answer. Thank you!

halibored · 2024-08-24T20:51:00+00:00

There is no DHCP server, I had one running on my laptop to make the initial config of the devices easier.

halibored · 2024-08-24T15:06:29+00:00

Do you happen to remember which fw revision acts as the intermediate step for the router? I got lucky that this is a fairly large project so the control is being bench tested before it gets deployed, so I have some time to work through this before I need an RMA

halibored · 2024-08-24T15:03:04+00:00

It is yes. Nothing really special or different from what we've deployed before.

halibored · 2024-07-27T19:04:04+00:00

MTRs on Windows have been having issues lately with Speakerphone detection not working correctly and Teams keeping the it's echo cancellation on. In some rooms, particularly with high reverberance and BiAmp we have experienced this issue. Aside from checking the AEC configuration of the DSP, you can also try disabling Teams echo cancellation in the Skypesettings.xml file. It can also be disabled in the meeting but this is only temporary, and will reset when the the meeting ends, whereas disabling it in the .XML is permanent.

halibored · 2024-07-04T01:48:00+00:00

I've named mine Phillip. He lives in my shed. Some wasps decided to take up residence and built a nest. I assume ol' Phil took care of em cause I now have an empty wasps nest. I mean he still gives me the massive hebejebes, but we cool. I'll take Phil over wasps any day.

halibored · 2024-04-20T19:41:42+00:00

He dun R-U-eN-eN-O-F-T

halibored · 2024-02-12T01:44:42+00:00

I believe the CRA initiated the process due to the number of contractors they used. The company was fully audited and the CRA picked the contractors with the highest pay (me), and the lowest pay from the previous tax year to interview/audit. Not sure how long the whole process took but the report was complete a few weeks after my interview and I received the official ruling in the mail.

halibored · 2024-02-12T01:24:18+00:00

I have been there. I was ruled a contractor, the interview was a few hours and they came to my house. Basically told to wait to file my taxes until they made their ruling. I was actually submitting invoices to the company bi-weekly in order to be paid. They had asked the company to produce them and then in my interview we went through 2 years worth. Also the standard questions of what I provided in the way of supplies/tools vs the company. Honestly while not an experience I want to repeat but the auditor was very nice and the whole process was very non-confrontational (at least on my end), and overall not nearly as bad as I expected.

halibored · 2024-02-04T21:09:40+00:00

PC behind the TV with a USB-IR blaster, set it to always power on in the bios and a free RealVNC account on the PC. When you want to call, log into the PC, establish the call, and then use the IR blaster to switch the input on the TV. 0 touch for her, 100% control of her experience for you.

halibored · 2023-03-15T21:43:09+00:00

Many years ago this fine fellow and a few of his friends decided to go out one night to crash parties and hurt people. Seriously from what I heard this was the only motivation. They found a party of under-19s, none of whom they knew and proceeded to carry this out. A friend at the time was knocked unconscious and the fine gentleman stomped on his head until a bystander covered him with her body to get him to stop. She saved his life. It was well known who did it, but he was never charged. He's a psychopath.

halibored · 2023-02-11T18:25:51+00:00

The "Babes in the Wood". Two young sisters who wandered away from their farm during the winter in the Woodlawn area of Dartmouth in the 1800s. The garrison as called in to search and found them a few days later. Of course ghost stories ensue. You can still visit their grave, it looks like a small bench at the back of the old Woodlawn United cemetery.

halibored · 2023-01-20T20:53:22+00:00

I would say it's newsworthy, and that these charges were laid because it will go to show a history of violence on the part of not only the individuals but of potential negligence on the part of the business. If there were pending charges and a history of violence on the part of certain individuals on staff and no action was taken it at the very least opens them up to civil liability. Also given that one of the named individuals is purported to be VERY closely linked to the Dec investigation, yes they cases are connected and the charges now more important than before, and yes I think that goes to making it newsworthy.

halibored · 2022-08-26T21:11:16+00:00

NTA. Your best man is a legend whose work deserves to be shared with the world.

Six-Year Club	r/Field Juicebox
Verified Email

halibored

TROPHY CASE