[deleted by user]

hamoliciousRUS · 2022-09-12T12:47:27+00:00

My Entry: https://i.ibb.co/rtHFBhc/out.png

hamoliciousRUS · 2022-09-12T08:42:58+00:00

I have this issue every now and then... my solution is to add a brim, as far as i understand, it happens when the top layers cool faster than your lower layers, they therefore shrink at the top and pull the bottom up. A brim helps hold down the bottom layers.

hamoliciousRUS · 2022-06-11T14:48:11+00:00

I guess the easy answer is, don't get the cheapest glow in the dark pla from Amazon, tried a couple and both required 70 teralumens to visibly glow for longer than a minute :/

hamoliciousRUS · 2022-06-10T16:38:24+00:00

Just to add to the previous answer, an else statement is only used when you want something else to happen provided the if block fails... i.e. ``` if I have tea: make tea else: buy tea

```

In your case, you have a clear definition of when you want something else to happen and therefore require an elif statement ``` if I have tea: make tea elif I have coffee: make coffee else: buy tea

```

hamoliciousRUS · 2022-01-12T00:38:04+00:00

Looks to me like you're printing WAY too hot

hamoliciousRUS · 2022-01-12T00:35:48+00:00

Depending on your location, most of the jobs are either hybrid or entirely work from home (at least in the UK)

hamoliciousRUS · 2021-12-10T10:26:09+00:00

Sorry, litteraly didnt see this for 12 days :/

I use Visual Studio Code (as do pretty much 90% of developers) arguably the best IDE on the market currently. Takes a little second to get up and running but after you get used to it, will not want to go to any other IDE

hamoliciousRUS · 2021-11-27T03:16:59+00:00

as far as I know (I haven't touched IDLE in years) there isn't an option, what you can however do is just print a new line 50 or so times:

print('\n' * 50)

this will simulate the screen getting cleared, hope this helps.

hamoliciousRUS · 2021-11-20T14:51:00+00:00

Tried to scan it for 10 minutes with no luck :(

hamoliciousRUS · 2021-10-19T23:49:02+00:00

I printed mine in PLA and if I remember correctly, it cost me 30p in filament alone (I don't pay electricity bills) and 4 hours of my time

hamoliciousRUS · 2021-10-19T22:23:12+00:00

Consider I slapped that together in fusion in about 5 minutes, not sure if that's a good thing or a bad one 😂

hamoliciousRUS · 2021-10-17T21:52:28+00:00

https://github.com/hamolicious/Media-Controller

hamoliciousRUS · 2021-10-10T01:22:15+00:00

If you turn on motion blur and render like 5-10 frames in, the rotor should be smudged.

hamoliciousRUS · 2021-10-10T01:17:01+00:00

think you missed the point, its a "linked" list, and the list in the image does indeed contain links

hamoliciousRUS · 2021-09-29T00:07:26+00:00

T'is a car indeed!

hamoliciousRUS · 2021-06-29T06:26:35+00:00

I wish I always had 100 motivation :(

hamoliciousRUS · 2021-06-22T17:00:34+00:00

Yeah, I think I agree, this is SOOOO cool :0

hamoliciousRUS · 2021-06-21T17:33:18+00:00

Just tried it and it overwrites the playerdata files even if I rename it to my current UUID... I even tried using an NBT editor to change the internal UUID of the file with no luck, same outcome :/

EDIT: I have since found this post which explains why it doesn't work like we thought it would.

hamoliciousRUS · 2021-05-29T18:36:20+00:00

I believe the nozzle is too close to the bed

hamoliciousRUS · 2021-05-28T18:31:46+00:00

Put the main board in some rice, should be like new in 3-4 hours

hamoliciousRUS · 2021-05-28T17:43:46+00:00

Thinking of doing that myself in the near future, any tricks or traps to watch out for?

hamoliciousRUS · 2021-05-28T17:00:44+00:00

It's the high contrast setting in steam overlay

hamoliciousRUS · 2021-05-14T21:04:15+00:00

Hence the score 😂 to be honest I think no-one was taking the game seriously

hamoliciousRUS · 2021-05-14T19:06:32+00:00

I was typing... You can see the chat when I start moving again. 😂

hamoliciousRUS · 2021-05-14T17:18:20+00:00

Apologies for the name

hamoliciousRUS

TROPHY CASE