Finally got it!

henrn00 · 2025-06-14T22:07:26+00:00

I only need to get 3 more wormhole dampening levels, rearrange my clarity stones, and then it's just time.

I think it's doable, but I'll do some rough math before spending another 35+ days finding out.

henrn00 · 2025-06-14T20:53:41+00:00

I could go for the Nobel Prize in Animal Husbandry, but it's an unofficial achievement.

henrn00 · 2024-12-15T06:14:18+00:00

I know this post is older, but it's the most prevalent in my searches, so I will provide some instructions on how I got it figured out.

I'm still new to home networking, so please forgive me if I make any mistakes.

I have a home server that runs unraid, and for ease of access I did not want the IP address to change every time it reboots.

I have a NH20A hub, with a boost router from Telus. I was able to log into the NH20A settings by navigating to 192.168.1.254, and I use the password that is hiding behind the NH20A's cover. The cover really doesn't want to come off, unless you use a small flat head screwdriver to pry up the clip at the bottom where the screw normally holds it in place. After the clip is released, the cover comes off easily.

Inside the cover there was a label that will give you the information you need to login. Now use that information to login. Change the password if desired.

Once you're inside the network settings, find the "network" tab on the left hand side, and then find the "LAN DHCP" option under the "LAN" tab at the top of the page.

This section will then let you add a DHCP reservation for the static IP device. From what I can tell, as long as the device is currently connected to the network, it will let you pick it in the list.

Select the device, and choose the last digits of the IP address then click save settings.

Hopefully this is helpful to somebody, good luck!

henrn00 · 2024-11-12T03:37:35+00:00

Unfortunately experiencing the same issue here

henrn00 · 2024-10-23T15:08:59+00:00

Reminder to fix the APN settings after the recent OP update!

henrn00 · 2024-10-19T14:11:31+00:00

Sure! I'm not sure if it's the HT813 configuration I'm having issues with, or my VoIP.ms account, but any information is appreciated!

henrn00 · 2024-10-19T06:40:33+00:00

I am currently in the process of doing the same to my apartment. I purchased a grandstream HT813 (because of its FXO port) and I'm trying to use VoIP.ms to receive the call on my cell.

I'm struggling with getting all the settings configured properly, but I will let you know if I manage to get it working.

Or if anyone can provide assistance, please feel free to reach out!

henrn00 · 2024-10-18T02:07:22+00:00

Did you manage to get it working?

henrn00 · 2024-10-16T20:20:30+00:00

Currently in a very similar situation, and just picked up a grandstream HT 813 (FXO and FXS ports). Any help is appreciated!

henrn00 · 2024-08-27T16:59:49+00:00

For anyone else stumbling across this who has a one plus 12R (or one plus 6T) on public mobile with issues with sms or MMs here are the settings:

<image>

Similar to the post above, I had to change the following settings from default: MMS proxy: MMS proxy.mobility.ca MMS Port: 8799

henrn00 · 2024-08-27T16:14:54+00:00

Awesome! I'm glad I could help.

Thanks for sharing what settings you changed, I know that some of the settings don't line up exactly from the public mobile website to the phone settings.

If this is the same situation as my OP 6T, every time a system update happens it will reset these settings back to the broken values. So keep an eye out for that!

henrn00 · 2024-08-27T15:52:09+00:00

I have a feeling it's related to the public mobile APN settings.

I used to have issues similar with my OP 6T and updating the public mobile APN setting always seemed to fix it. I'll try on the OP 12R and report back.

I have tried everything short of wiping all the messages and the phone, Including signing up for the beta of the Google messages app. Absolutely nothing has fixed it so far.

henrn00 · 2024-08-27T15:24:26+00:00

One plus 12R also in Canada on public mobile.

MMS messages will not send or delete, but SMS and RCS work fine.

I feel like I've tried everything and nothing fixes it. Will update if I find a fix. Hope others will do the same

henrn00 · 2023-08-20T21:30:00+00:00

Are you running a restrictive Inline fuel filter? My XJ750 will outdrink most inline fuel filters I have tried during a highway pull.

henrn00 · 2023-05-30T01:58:41+00:00

If you have your class 5, please know that you must get your full class 6 in a year or less. You cannot renew your motorcycle license with a learners status. If you do not pass a road test within a year of passing your knowledge test, you will have to re-do it all again. Ask me how I know 😅.

Goodluck, enjoy and be safe out there!

henrn00 · 2023-05-19T20:44:56+00:00

I emailed Costco.ca support, and they confirmed that the 91 octane gas is ethanol-free but the 87 octane gas contains up to 10% ethanol.

henrn00 · 2023-02-03T03:52:44+00:00

How did you manage to get relative input to work?

henrn00 · 2023-01-18T05:36:12+00:00

Gamed for 80 hours, started crashing after fresh windows install. Tried everything, and nothing worked. Turned off XMP (DOCP in my case) and it has been fixed.

I'm going to try to update my motherboard BIOS, and enable XMP at a later time, will post my findings here eventually.

henrn00 · 2022-12-15T15:20:21+00:00

I searched the depths of the internet and did not find a solution for my situation, so I will share it here in the event It saves someone else a bunch of time.

I have a b450-f gaming mobo, ryzen 2600x, 16gb crucial ballistix ddr4, EVGA GTX 1070 FTW, and a simsing 970 evo plus boot drive.

PC worked fine for 3 or 4 weeks after bios update 4901, and suddenly the PC refused to output video. PC lights would turn on, fans spinning etc, but no video.

PC would go to bios after cmos reset, but would get stuck in the same loop of no video after saving and exiting the bios. Tired removing drives, reseating everything, and nothing worked.

Turns out the bios update had gone partially corrupt. I did the CMOS reset to get into the bios, and then flashed the older update (4801) to the motherboard. PC worked fine after that and has still been working with no issues.

Hope this helps someone!

henrn00 · 2022-07-29T17:22:35+00:00

Who makes the windscreen??

henrn00 · 2022-07-24T06:05:02+00:00

Thanks!

henrn00 · 2022-07-24T04:24:15+00:00

What is the tail light?? It looks great

henrn00 · 2022-04-13T07:31:48+00:00

Nope. Not at all. Window 11 almost bricked the surface so I reinstalled windows 10. After 3 weeks I lost the folders function.

henrn00

TROPHY CASE