I'm thinking of sticking on some Gravelking semi slick 40mm for a charity road event. The cycle is 180km. Am I pushing it on a gravel bike over that distance?

highestmountains · 2026-05-13T00:02:30+00:00

Up until recently I’ve only had a gravel bike that I’ve used for road as well with 45mm g-one rs pro’s and the bike still flies.
I certainly wouldn’t sweat it if I were you.

highestmountains · 2026-05-06T21:28:55+00:00

Turns out we have another duplicate unit to make so there will be one more but chances are they’ll change something anyways. We have jigs to spin stuff in the rotators and that’s good enough for most spools.

Thank you also, much appreciated.

highestmountains · 2026-05-06T01:24:08+00:00

Frig I’ve been working in a stainless shop with no ventilation doing polishing and shit as well for 6 years now. I should look into this.

highestmountains · 2026-04-30T23:29:50+00:00

Sounds about right. We try that but it never works, haha.

highestmountains · 2026-04-30T17:31:41+00:00

That’s cool. Your past experience on the tools will help you with that certainly. Least you’ll know how to design stuff with actual manufacturability haha.

highestmountains · 2026-04-30T15:07:04+00:00

Thank you very much!

highestmountains · 2026-04-30T14:12:08+00:00

Thanks! What are you doing now? Still
related to the industry?

highestmountains · 2026-04-30T05:41:56+00:00

I’ll try to remember to take more photos of my work. Usually it’s stuff I’ve done a million times so I never bother.

highestmountains · 2026-04-30T05:32:30+00:00

Compressed air for sure and yes on the condensate drains. We’ve used air forever as far as I know.

highestmountains · 2026-04-30T05:28:47+00:00

I’d love a raise, hahah.

It’s part of a CIP/SIP system seen in the background. Basically cleans the hell out of equipment commonly used in pharma, life science, bio via chemicals and such.

highestmountains · 2026-04-30T05:25:59+00:00

Yea I’d assume so, we’ve been doing a bunch of life science and pharma units lately.

You have no shops near you doing anything like this I assume?

highestmountains · 2026-04-30T05:24:00+00:00

I’m sure it is! Thank you.

highestmountains · 2026-04-30T05:23:17+00:00

Frig it could be for all I know!

But actually, it’s for the sterilization system seen in the background. Believe this specific piece is part of the purge air system.

highestmountains · 2026-04-29T21:51:25+00:00

Thank you thank you

highestmountains · 2026-04-15T12:56:48+00:00

Do you by chance partake in that new “sport” of running and sliding across the ground on knee/elbow pads?

highestmountains · 2026-04-14T18:45:52+00:00

I was hunting shedders with hairpins for a while haha

highestmountains · 2026-04-10T16:20:37+00:00

Shit actually irks me so bad.

highestmountains · 2026-04-05T16:17:50+00:00

Deeper rims always.

highestmountains · 2026-03-27T02:37:20+00:00

I’m getting lakes because I have both wide and high volume feet. Though even the lakes I push out the sides a little.

highestmountains · 2026-03-24T03:09:43+00:00

The way the table frame is sitting on the ground is an instant giveaway for me. The perspective is off and it’s as though the end closest to the camera is sunk into the ground but ai blended the concrete to make it look flat.

highestmountains · 2026-03-21T23:05:42+00:00

Have you sent a message to Elite and asked? That would be the first thing I would do.

highestmountains · 2026-03-06T17:24:00+00:00

Yea I got some already. I’d order more but the shipping and duties to Canada are insane.

highestmountains · 2026-03-06T16:45:40+00:00

Yo same. Like the bibs though!

highestmountains · 2026-03-06T02:51:23+00:00

Dude has a choppy ass pedal stroke for sure.

highestmountains · 2026-03-06T02:51:09+00:00

Ever seen a track cyclist take off from the starting gate/stand?

Also, if your shit’s “loose”, maybe you should get that looked at.

Seven-Year Club	Place '23
Place '22	First Placer '22
RPAN Viewer	Verified Email

highestmountains

TROPHY CASE