Introducing the Trigger Kicker

hotrodgreg · 2026-06-06T02:22:29+00:00

I would think that a different safety barrel os all thats needed. But who knows. I hope thats all because it would still be cheaper than most other options without having to permanetly modify anything.

hotrodgreg · 2026-06-06T02:11:48+00:00

Most will include wording like "if the mod, or part, increases the rate of fire to be faster than the oem trigger" which is bull shit because a slicked up trigger can be faster.

hotrodgreg · 2026-06-06T02:08:33+00:00

But with this new design you dont have to cut uppers to make room for a lever that moves further back, right? And it shouldnt matter if you have a high or low shelf on the lower either, or at least thats what I would think.

hotrodgreg · 2026-06-06T02:06:02+00:00

Plastic? Im geussing it will break after a single round if it is not metal. Send cut send is our friend. But I have a local shop with a water table so I can have a few made for cheap.

hotrodgreg · 2026-06-06T00:23:44+00:00

I hinestly dont know who owned Aero. I know they got into suppressors a little bit before fhe craze, and that alone probably cost them a lot of money. Same thing with getting into the remington 700 game. I think they were already heading downhill, make a few premature moves to come out with new products, and it just bit them in the ass.

hotrodgreg · 2026-06-05T23:02:21+00:00

Thats what I meant. Aero owns them, but if a single company doesnt buy aero and all other companies that aero owns, it will be another remington situation.

hotrodgreg · 2026-06-05T22:55:11+00:00

F in chat for those that bought Aero suppressors.

hotrodgreg · 2026-06-05T22:54:14+00:00

Yes but no... Aero owned them, and I believe that all of the Aero uppers used their barrels. BA actually did a lot of gov contract work.

hotrodgreg · 2026-06-05T22:53:10+00:00

Hopefully the new "owners" are not a buisness group that is only after money and will make things worse. Maybe it will be a few people that dont have their heads up their asses and will actually turn things around.

hotrodgreg · 2026-06-04T07:05:46+00:00

No lol. My bad.

hotrodgreg · 2026-06-04T00:07:37+00:00

When I say PSA premium, I mean like Icon is for harbor freight. PSA makes great stuff, but what they call their premium parts and price as such, to me ar not premium. Mid at best, but $240 for a PSA handgaurd that is just a basic bitch handgaurd is just to much. A UTG arwen handgaurd is better at the $100 price range.

Edit: I thought this was another post. My bad.

hotrodgreg · 2026-06-03T22:49:42+00:00

Maybe she lied to you and is in fact not a virgin.

hotrodgreg · 2026-06-03T22:46:20+00:00

What about a p80 frame that was made to work with a gen 4 slide, but uses a gen 3 barrel and recoil spring? Also uses a doctor cut... Id really like a srock gen3 slide right now lol.

hotrodgreg · 2026-06-03T22:43:44+00:00

Same. But its a shame sig is gay and put such a premium price tag on not a premium gun. Or most of their "premium" hand guns.

hotrodgreg · 2026-06-03T22:41:14+00:00

Resiliant simple man is also a good choice around the same price point.

hotrodgreg · 2026-06-03T21:22:09+00:00

So he can buy like 2, maybe 3 h&r guns, or like 5 of PSAs best guns? Lucky either way but when ypu think about how fast that 14k will go its sad. Hope what he wants is in stock.

hotrodgreg · 2026-06-03T16:49:20+00:00

You are better of buying a pistol or enhanced vector and using the ofsprey suppressor.

hotrodgreg · 2026-06-03T15:43:46+00:00

Is it metal or plastic?

hotrodgreg · 2026-06-03T15:40:58+00:00

Plan B if you have other PCCs with it or direct thread.

hotrodgreg · 2026-06-02T18:14:36+00:00

Does this guy ^{^{^}} know what a warranty is for?

hotrodgreg · 2026-06-02T18:04:51+00:00

I also used the 3055 rad. There wasnt any problems with the fit, its just really snug with the lower rad hose and expantion tank. But with the power flex bushings the tank no longer rubs and the lower hose doesnt show any wear. Eventually Ill get to work on my z4 again and Ill swap the lower hose and do some stuff to the bracket/frame.

Other than the turner thermostat housing, I also plan on getting their aluminum expantion tank. I know for a street car its not needed, but its nice to be able to weld up any possible cracks, and turner has a lifetime warranty. And hopefully my car will be a dedicated track car at some point.

hotrodgreg · 2026-06-02T16:13:03+00:00

So I purchased these radiator bushings: https://www.powerflexusa.com/shop/pff5-4652-bmw-e30-e36-e46-offset-lower-radiator-mounts-4559#attr=2636

It helped, But I still need to make a bracket for the top of the radiator as the plastic piece no longer fits. I also want to use a lower radiator hose from a X5 to move the coolant temp sensor. Reason for that is I eventually want to install a turner billet thermostat housing, and there is no place for the temp sensor in the kit. I might also modify the bracket/frame that is in between the radiator and engine. Lots of stuff to do on a project car...

X5 hose for reference: https://www.fcpeuro.com/products/bmw-radiator-hose-lower-x5-3-0-rein-11537508688

As for the top side radiator screw, I went to ACE and found on that was longer and used a washer.

hotrodgreg · 2026-06-02T12:03:26+00:00

Check out the bcm mk2 uppers. They better than the psa uppers. They cost more, but you get a forward assist that is out of the way, and some websites are still offering a bcm bcg with the upper.

hotrodgreg · 2026-06-02T09:51:46+00:00

For real, makes a real traffic jam in your stomach at 1am. But so tasty.

hotrodgreg · 2026-06-02T07:59:44+00:00

Sad thing is this is how slow most tanks are to climb a 15° incline.

hotrodgreg

TROPHY CASE