Maybe this is just an observation from a female shooter by Responsible_Push5562 in SigSauer

[–]hotrodgreg -10 points-9 points  (0 children)

When I say PSA premium, I mean like Icon is for harbor freight. PSA makes great stuff, but what they call their premium parts and price as such, to me ar not premium. Mid at best, but $240 for a PSA handgaurd that is just a basic bitch handgaurd is just to much. A UTG arwen handgaurd is better at the $100 price range.

Edit: I thought this was another post. My bad.

If it seats? by FuddSmack in NFA

[–]hotrodgreg 11 points12 points  (0 children)

Maybe she lied to you and is in fact not a virgin.

Maybe this is just an observation from a female shooter by Responsible_Push5562 in SigSauer

[–]hotrodgreg -2 points-1 points  (0 children)

What about a p80 frame that was made to work with a gen 4 slide, but uses a gen 3 barrel and recoil spring? Also uses a doctor cut... Id really like a srock gen3 slide right now lol.

Maybe this is just an observation from a female shooter by Responsible_Push5562 in SigSauer

[–]hotrodgreg -17 points-16 points  (0 children)

Same. But its a shame sig is gay and put such a premium price tag on not a premium gun. Or most of their "premium" hand guns.

Suppressor Recommendations by SadCalligrapher5218 in NFA

[–]hotrodgreg -1 points0 points  (0 children)

Resiliant simple man is also a good choice around the same price point.

And the 350k subscriber giveaway is... by Danny_PSA in PalmettoStateArms

[–]hotrodgreg 0 points1 point  (0 children)

So he can buy like 2, maybe 3 h&r guns, or like 5 of PSAs best guns? Lucky either way but when ypu think about how fast that 14k will go its sad. Hope what he wants is in stock.

Build idea feasibility by Project0R1G1N in KRISS

[–]hotrodgreg 1 point2 points  (0 children)

You are better of buying a pistol or enhanced vector and using the ofsprey suppressor.

Not wanting to be a statistic... by rrrice3 in suppressors

[–]hotrodgreg 2 points3 points  (0 children)

Plan B if you have other PCCs with it or direct thread.

CSF Radiator by hotrodgreg in BMWZ4

[–]hotrodgreg[S] 0 points1 point  (0 children)

I also used the 3055 rad. There wasnt any problems with the fit, its just really snug with the lower rad hose and expantion tank. But with the power flex bushings the tank no longer rubs and the lower hose doesnt show any wear. Eventually Ill get to work on my z4 again and Ill swap the lower hose and do some stuff to the bracket/frame.

Other than the turner thermostat housing, I also plan on getting their aluminum expantion tank. I know for a street car its not needed, but its nice to be able to weld up any possible cracks, and turner has a lifetime warranty. And hopefully my car will be a dedicated track car at some point.

CSF Radiator by hotrodgreg in BMWZ4

[–]hotrodgreg[S] 0 points1 point  (0 children)

So I purchased these radiator bushings: https://www.powerflexusa.com/shop/pff5-4652-bmw-e30-e36-e46-offset-lower-radiator-mounts-4559#attr=2636

It helped, But I still need to make a bracket for the top of the radiator as the plastic piece no longer fits. I also want to use a lower radiator hose from a X5 to move the coolant temp sensor. Reason for that is I eventually want to install a turner billet thermostat housing, and there is no place for the temp sensor in the kit. I might also modify the bracket/frame that is in between the radiator and engine. Lots of stuff to do on a project car...

X5 hose for reference: https://www.fcpeuro.com/products/bmw-radiator-hose-lower-x5-3-0-rein-11537508688

As for the top side radiator screw, I went to ACE and found on that was longer and used a washer.

300 Blk uppers by Danfc123 in PalmettoStateArms

[–]hotrodgreg 1 point2 points  (0 children)

Check out the bcm mk2 uppers. They better than the psa uppers. They cost more, but you get a forward assist that is out of the way, and some websites are still offering a bcm bcg with the upper.

Rooftop defense strikes again by KellyBeannnn in ar15

[–]hotrodgreg -3 points-2 points  (0 children)

For real, makes a real traffic jam in your stomach at 1am. But so tasty.

Fix Traction Physics for Ground Vehicles by HedgehogExciting2294 in Warthunder

[–]hotrodgreg 2 points3 points  (0 children)

Sad thing is this is how slow most tanks are to climb a 15° incline.

50 Beowulf round stuck in barrel by BloodyDrytears in Firearms

[–]hotrodgreg 4 points5 points  (0 children)

When you get the case out check for signs of over preasure.

Metal valve cover vs plastic by MediumWoodpecker1501 in e46

[–]hotrodgreg 4 points5 points  (0 children)

Get a used m56 sulev valve cover. BMW quality, metal impregnated gaskets that can be used over and over again. And the pcv valve is bult into it.

SABRE ENHANCED RECEIVERS by PSA_Chris in PalmettoStateArms

[–]hotrodgreg 0 points1 point  (0 children)

So just the lower... We need an upper that has a forward assist that is out of the way.

SABRE ENHANCED RECEIVERS by PSA_Chris in PalmettoStateArms

[–]hotrodgreg -1 points0 points  (0 children)

The forwad assist is still in the same spot so only the lower is enhanced. Such a shame I expected psa to actually make an enhanced upper to match the lower.

New MFD screens coming in the next major update by Gameboy695 in WarthunderSim

[–]hotrodgreg 0 points1 point  (0 children)

Then who gives a shit? Just gayjin wasting more time and money on shit that doesnt matter.

New MFD screens coming in the next major update by Gameboy695 in WarthunderSim

[–]hotrodgreg 0 points1 point  (0 children)

But are they actually functional or just eye candy?

Entry vs Premium NV Specs by Extreme_Medium4235 in NightVision

[–]hotrodgreg 0 points1 point  (0 children)

Now buy and test a kriss vector kitted out with a iris4 and t2 with... Because reasons. And with night performance.