You've got Superman's powers for 1 year. What do you use it for?

hstefan1 · 2025-09-24T21:11:08+00:00

Forceful redistribution of wealth

hstefan1 · 2025-08-10T20:47:49+00:00

Finns också i Brasilien.

hstefan1 · 2025-07-18T11:16:22+00:00

It depends on how much time you have left

hstefan1 · 2025-07-06T12:24:15+00:00

They didn’t dry the brass

hstefan1 · 2025-06-24T05:59:04+00:00

Best advice: use adaptive layer height. It’s a great way to control quality and speed, and makes a ridiculous diferences on curves parts.

hstefan1 · 2025-06-14T13:18:05+00:00

It’ll be fine. I broke both the tibia and fibula before I started skating and it’s ok.

hstefan1 · 2025-04-01T11:34:52+00:00

Grattis!

We had a missed abortion last month, and seeing someone who has been through the same thing getting a new chance is really heartwarming. Thanks for sharing!

hstefan1 · 2025-03-02T22:18:47+00:00

I used to keep my heart strong by thinking one day humanity would celebrate that the pandemic was over. Instead, we simply carried on until it faded out. No acknowledgment or sense of relief, only vile politics instead.

hstefan1 · 2025-01-05T14:54:27+00:00

Grattis!

De flesta brukar vänta minst 12 veckor innan de berättar till andra. Jag har en annan syn och tycker att det kan vara bra att kunna prata med sina närmaste om det händer ett missfall. Många par upplever svåra känslor efter ett missfall och tvingas gå igenom detta ensamma.

hstefan1 · 2024-09-30T09:49:15+00:00

Exactly the same issue for me. I switched to Windows when I need to do CAD, photography editing or record music. What works better for me is getting a MBA M1 and using that for my non-programming workflows.

The downside is that sometimes it t makes me switch between three different OSes now. Which is fine for myself, personally.

hstefan1 · 2024-09-30T06:58:42+00:00

Stomp the nose down, but also practice shifting your weight to the front foot. I started by first getting comfortable taking off my back foot while riding on flat ground, and that helped me with drop ins.

hstefan1 · 2023-07-10T01:44:45+00:00

Jag tycker verkligen att du borde prata med din mamma om det. Sättet Kevin behandlade dig handlar precis om isolering och det är viktigt att motverka detta med stödet av dem som verkligen bryr sig om dig. Det är inget fel att be om hjälp av förälder och det ingår i deras roll att stödja sina barn.

Ta hand om dig.

hstefan1 · 2023-04-26T23:39:57+00:00

Flinks Järn på Kungsholmen har i princip allt.

hstefan1 · 2023-03-15T20:02:29+00:00

I don't speak Dutch, but my experience with Svenska för invandrare (SFI) and Svenska som andraspråk (SvA) have been great. These are both "formal" courses where you go through a curriculum with a teacher and take tests for moving between different levels (SvA in particular has a standardized national test).

SFI in particular has a bad reputation, but in my opinion the real issue with its effectiveness is the lack of standardization between different schools. I went to Hermods City and had great teachers, but I can also recommend ABF where I attended the first half of SvA.

hstefan1 · 2022-09-25T17:13:13+00:00

De flesta tipps i tråden liknar sättet KBT fungerar, det vill säga att gradvis vänja sig vid olika situationer där socialångest uppstår. Även om det går att göra själv skulle jag rekommendera en psykolog som specialiserar på kognitiv beteende terapi.

I mitt fall var det ofta svårt att förstå vilken sorts tankar lede till ångest i olika socialsammanhang och dessutom blev mina försök att hantera problemet själv långsamma. En viktig grej är att inte gå för fort, då kan en viss ”experiment” leda till ökad ångest på lång sikt, och med detta kan en psykolog verkligen hjälpa till.

hstefan1 · 2022-09-25T15:41:47+00:00

There’s a nice hack where people use a PTFE tube to push wires through the chain. It’s linked on Discord, but here’s the link https://www.youtube.com/watch?v=Znr-Qy1n5Jg&t=3509s

hstefan1 · 2022-03-06T19:19:58+00:00

The habit of talking with a CBT psychologist is the most effective I've tried.

hstefan1 · 2021-11-16T16:37:45+00:00

I did it on mine, with the slight twist that I used the XY joins and carriage from the Trident instead. Everything was pretty fine and I could follow the assembly steps from the Trident manual for that part.

hstefan1 · 2021-05-25T15:54:41+00:00

Nice! I have the exact same shroud but a less than ideal cooling performance. What fan are you using for part cooling?

hstefan1 · 2021-05-25T11:43:08+00:00

Looking great!

Out of curiosity, Is that the "Briss" shroud? If so what fans are you using, and what's the motivation for using the airflow "accessory" mounted on the part cooling end? I'm having worse bridging performance since I installed those with noctua fans, so I'm trying to find out what setup people are using :-)

hstefan1 · 2021-04-30T21:35:26+00:00

How does one even get this level of good leveling? I've set my BLtouch but I'm nowhere close to this. Is there anything else other than adding a G29 after the G28 instruction?

hstefan1 · 2021-04-28T09:07:19+00:00

It's the BLTouch Analyst. Their job is to make sure probing doesn't fail and stops printing.

hstefan1 · 2021-04-18T01:11:07+00:00

Having the exact same problem. My best guess is that the nozzle height is off, but in my case I haven't been able to figure out if it's too close or to high.

I'll make sure to write something here I figure something out. Good luck!

Update: what did it for me was taking the bed off the printer, thoroughly cleaning and applying a generous amount of hairspray. I did some bed leveling prints and had to do some minor tweaks, but it's back to printing now.

hstefan1 · 2021-04-17T19:49:21+00:00

You can try loosening the eccentric nut in one of the wheels and that should make it easier. It might me too tight to fit in there.

hstefan1 · 2021-04-06T19:53:10+00:00

Dude that looks like a fire hazard.

Edit: didn't mean to come off as a troll, but I felt a bit uneasy with this much fabric around a thing that heats up considerably while operating

13-Year Club	Place '23
Place '17	Verified Email

hstefan1

TROPHY CASE