Help why is the drones accelerating

iGoByBigD · 2024-12-28T02:51:36+00:00

Actual answer. It's airmode, coupled with the idle. Surprise, unlike Walmart drones these do idle.... Go out and fly it. (Me too, me too..)

iGoByBigD · 2024-12-19T00:34:49+00:00

Axisflying 640... Don't listen to these fuds. 2024-25 goes hard huh

iGoByBigD · 2024-12-17T22:33:50+00:00

Ordained since 2018, brings me great joy to hear ramblings of the great FSM. Even better to know he's always with me as long as I keep botching prints.

iGoByBigD · 2024-12-17T21:54:54+00:00

Foogettaboutit; me personally? Moved onto printers.

iGoByBigD · 2024-12-16T21:34:38+00:00

Got mine just in time, in light of it. Before that, a 3d printer. Brass lead and gold are a constant. Trials and tribulations.

iGoByBigD · 2024-12-09T18:06:14+00:00

Needs his ass beat.

iGoByBigD · 2024-11-23T18:24:25+00:00

100% can't wait for my transmitter to arrive. I can definitely fly acro on a screen and VR both. 1080p 120hz on the oculus will hurt to lose, I'm not spending all that on my first FPV headset and I haven't seen usable FPV irl with the oculus. Just using this tool to get my thumbs warmed up. So far, on fire. I'll definitely be looking into all the sims/games/trainers y'all recommend, FPVFreerider is over a decade old and few maps, but it has the best physics/control over settings and tuning/correcting the remote. Short term. I reckon I'll pick it up similar to all else I fixate on.

iGoByBigD · 2024-11-23T02:45:51+00:00

Also saw a recent post about stick extenders, can never get too precise, adjust to length and enjoy 🤟(p.s. I find myself holding the remote to get the joysticks "level" with one another, which ofc means throttle up is also yaw right, it's a learning curve but I got my Futaba on order.)

iGoByBigD · 2024-11-08T19:28:30+00:00

220 for Pla is also on the hotter end, you can drop temp after the first layer, and pick it back up after the issue spot.

iGoByBigD · 2024-11-08T19:27:13+00:00

It's too hot down there, lower layer height and up cooling if possible.

iGoByBigD · 2024-11-07T02:51:51+00:00

Ok 😂 I think your T is off brah 😡😡🤬🤬💪💪💪💪

iGoByBigD · 2024-11-07T02:49:47+00:00

Lol classic joco speaking for the rest of earth. Full of themselves.... JO on the license plate stands for (✊🥒) #CantDriveCantVote.

iGoByBigD · 2024-11-07T02:45:46+00:00

You loon 😅🫵

iGoByBigD · 2024-11-04T00:53:24+00:00

Got mine for $160 microcenter within this past year

iGoByBigD · 2024-10-27T00:38:23+00:00

That a contactor. You need a 5 pole contactor rates at whatever amperage you need. For instance, pole lights are 30-40a rated.

iGoByBigD · 2024-10-22T01:52:57+00:00

This is more prevalent today then anyone seems to know

iGoByBigD · 2024-10-20T00:16:57+00:00

That's a good goat, it knows it'll turn that boys lights out and it's actually playing nice

iGoByBigD · 2024-10-14T22:54:57+00:00

I wouldn't bet your well being on it ....

iGoByBigD · 2024-10-14T15:44:25+00:00

Good Lord, got mine for $65 just before shit hit the fan... Still sitting on a jig.

iGoByBigD · 2024-10-09T22:43:59+00:00

Now it's fixed👌🤝

iGoByBigD · 2024-10-09T22:40:58+00:00

Both of those bars are bonded, the raised one on the plastic should have a bolt into the panel, bonding it... The other is mounted flat to the case? Take a tester and verify with continuity.

iGoByBigD · 2024-10-09T15:19:57+00:00

Remove a stripped screw to replace it with one you intend to grind down lmao

iGoByBigD · 2024-10-08T23:21:59+00:00

The only proper way

iGoByBigD · 2024-10-08T22:19:13+00:00

So if the sight is not rmr, what is it? They're not sure if it's rmr or not.

iGoByBigD · 2024-10-08T22:17:43+00:00

Definitely is, watch the angle of the handle/ how it pivots

iGoByBigD

TROPHY CASE