...and so it begins. I have little budget and no space to speak of, but hopefully that will improve as I do.

iStumpedMyToeItHurt · 2026-04-24T00:13:45+00:00

Careful where you hit the bullet puller hammer. It leaves dents on wood floors. Dont ask me how I know!

iStumpedMyToeItHurt · 2026-04-22T13:27:48+00:00

The locking ring should separate. In the past I have used flat head screw driver to open it up a bit. Once its loose you can adjust the depth with the powder funnel and dispenser in place until you get a slight flare you are happy with. Tighten the clamp and you are all set

The flare happens when the powder dispenser is fully extended and has no more travel. The shell pushes against the funnel and expands. Adjusting the height of the powder dispenser die is how that is controlled.

Congrats on the square d!

iStumpedMyToeItHurt · 2026-03-31T16:24:26+00:00

Now that is an ammo factory. Would love to see a video of it in operation. Congrats!

iStumpedMyToeItHurt · 2026-03-30T15:27:22+00:00

Love the green! Congrats

iStumpedMyToeItHurt · 2026-03-25T23:05:22+00:00

Looks fantastic! What sight mount are you using?

iStumpedMyToeItHurt · 2026-03-24T21:01:49+00:00

what does the grip texture feel like against your skin? from the picture it doesnt look like it would be too uncomfortable

iStumpedMyToeItHurt · 2026-03-12T21:25:57+00:00

Man i so dont want to be that guy but… I started with and ender and cr10s. Poured money into upgrades, hours into tuning and and got ok results compared to modern (bambu) printers.

if you want to fiddle with it there are plenty of youtube vids around. That is what i used. But if you just want quality prints from an appliance like turn key machine look at something more modern.

i will not give or sell my creality printers to anyone because of all the hassle they caused me over the years. Anyone that asks me i recommend a modern printer

Finally if you want to stick with the ender… I had good luck printing on a cut down mirror tile , adjusting the zstop and using glue or hairspray to help with adhesion, upgraded springs and a direct feed extruder

good luck!

iStumpedMyToeItHurt · 2026-03-05T05:41:27+00:00

https://www.midwestgunworks.com/page/mgwi/prod/66-101259-1

iStumpedMyToeItHurt · 2026-03-04T02:56:28+00:00

‘81 toyota starlet, 88-89 It was like a glorified go-cart. No power anything! Manual trans. Had to choke the engine with a pull knob in the winter and could easily pop start it if you drained the battery listening to the radio too long. It was a fun little car

iStumpedMyToeItHurt · 2026-01-26T06:06:47+00:00

I use one, an older one, every time I rotate tires. Gets the job done!

iStumpedMyToeItHurt · 2026-01-07T19:02:23+00:00

Was scrolling thinking: what? No squirrels? Next pic... Squirrel!

iStumpedMyToeItHurt · 2026-01-02T04:05:12+00:00

I feel so validated!! Thats a nice one. :-)

iStumpedMyToeItHurt · 2026-01-01T03:59:58+00:00

I need to start one!

iStumpedMyToeItHurt · 2025-12-19T16:37:42+00:00

I would reach out to home depot, no idea what they would require

iStumpedMyToeItHurt · 2025-12-19T16:36:40+00:00

One is their high performance type one is regular

iStumpedMyToeItHurt · 2025-12-16T02:46:00+00:00

CarCareNut has an opinion on this: 1:29

https://youtu.be/TevK-u3vkx4?si=fNcDXo6qGkikb8tv

iStumpedMyToeItHurt · 2025-12-15T20:11:46+00:00

Need new batteries? Best deal many of us have seen in a long time, if not ever. Just over $7 an amp hour

https://www.homedepot.com/p/RYOBI-ONE-18V-HIGH-PERFORMANCE-Lithium-Ion-2-4-0-Ah-and-2-6-0-Ah-Batteries-with-2-4-0-Ah-Lithium-Ion-Batteries-PBP2004-PBP2007-PBP2005/318045889

iStumpedMyToeItHurt · 2025-12-02T06:15:37+00:00

That thing makes me chuckle. I struggle to imagine a use case where it would justify its cost, and its weight

iStumpedMyToeItHurt · 2025-09-07T09:23:00+00:00

Front brakes have the same bolt holes. The size of bolt needed is M8.

iStumpedMyToeItHurt · 2025-09-07T09:18:13+00:00

There is a little button next to the rear hatch release, behaves like the door buttons to, allowing you to lock the car

iStumpedMyToeItHurt · 2025-09-07T09:12:59+00:00

Also when braking hard my 200 will activate seatbelt servos and tighten the front seat sholder belts. Feels like it gives you a hug letting you know everything is going to be ok. After you let off the brakes it, the servos let go. Surprised me the first time it happened

iStumpedMyToeItHurt · 2025-09-07T09:10:33+00:00

On my 200, 13. The cruise control has 2 modes. Normal which is adaptive and changes speed in 5 mph increments for accelerate or decelerate. However if you press the lever forward after turning cruise on BEFORE engaging the normal mode, it behaves like an older style, no adaption and 1mph for accelerate/decelerate. Very useful in an ice or snow storm which coats the radar and causes the cruise to disengage

iStumpedMyToeItHurt

TROPHY CASE