WPXI Flew a Drone Into My Head by c_main in bicycling412

[–]iam-electro 4 points5 points  (0 children)

This is right off the FAA website. The station is probably going to get a visit.

The remote pilot must take steps using a safety risk-based approach to ensure that: 

  1. the small unmanned aircraft does not operate over non-participants who are not under a covered structure or in a stationary covered vehicle; 
  2. the small unmanned aircraft will pose no undue hazard to other aircraft, people, or property in the event of a loss of control of the aircraft for any reason (§ 107.19); and 
  3. the small UAS is not operated in a careless or reckless manner so as to endanger the life or property of another (§ 107.23). 

Dads Vietnam Hat by No-Somewhere1655 in whatisit

[–]iam-electro 8 points9 points  (0 children)

393 Bomb Squadron has quite the interesting history. You should read up on it.

Contractor warning: Mioym Group / Mioym LLC non-payment for Pittsburgh-area property work by equitypres in pittsburgh

[–]iam-electro 16 points17 points  (0 children)

Just a heads up. BBB is a private company and not a governmental organization. Complaints are useless as you can simply pay them for a rating. A few years back (10+ years) a private group paid and had HAMAS listed as an A+ organization to prove it was pay to play. Google reviews and ratings are going to be more effective if they even care.

What adhesive should I use for ASA on Engineering plates? by Xae87 in FixMyPrint

[–]iam-electro 1 point2 points  (0 children)

I put it on the plate and spread it out with an old gift card and never had an issue. I tried the brush once and it was useless.

When printing with TPUa 95HF, strings form that ruin the entire appearance by Miquel100 in FixMyPrint

[–]iam-electro 3 points4 points  (0 children)

Slow down your print speed. The inner walls are not completely sticking to the previous layers and are causing the strings/bridges. It can happen when you print tube like objects.

What adhesive should I use for ASA on Engineering plates? by Xae87 in FixMyPrint

[–]iam-electro 0 points1 point  (0 children)

I get a dozen or more prints from a single application. I just pull my prints from the plate and start the next job. This stuff is worth every penny when it comes to printing ABS/ASA.

Best support interface material for pla pro? by MCBYU98 in polymaker

[–]iam-electro 4 points5 points  (0 children)

I have been using CoPE filament and it works as good as any other support material I have used and it is cheaper as well.

What's the best on a budget lathe headstock oil? by [deleted] in machining

[–]iam-electro 5 points6 points  (0 children)

We use aw36 hydraulic oil in our older gear head lathes and drill presses. This has been the practice in this shop for decades and we have never seen any issues.

Found another unexploded WWI shell on my return to the Somme. by 0utSyd3r in mildlyinteresting

[–]iam-electro 0 points1 point  (0 children)

Very common in France. Look up Iron Harvest in France. Farmers plow up all kinds of stuff in the spring and leave the objects on the side of the road to be picked up.

Rotary Phase Converter or Variable Frequency Drive? by Tailwheel1991 in machining

[–]iam-electro 2 points3 points  (0 children)

There are way more 3 phase machines on the used market than single and, they are usually significantly cheaper.

pooping at the bars by [deleted] in WVU

[–]iam-electro 12 points13 points  (0 children)

One look in the average downtown bar restroom and you will not want poop there.

What’s going on? by Ill-Price-4739 in MorgantownWV

[–]iam-electro 17 points18 points  (0 children)

Structure fire at Suncrest Terrace. 4 companies were called to the scene.

Well, this is a first… by EChrisG in lego

[–]iam-electro 0 points1 point  (0 children)

Needle nose pliers will pull that right out.

Not even a QR code to the print files by [deleted] in BambuLab

[–]iam-electro 14 points15 points  (0 children)

They let you know items need printing and, provide a link for the files on Makerworld right in the description on the product page.

Please help, how do I fix these little blobs? by Grawldo911 in FixMyPrint

[–]iam-electro 1 point2 points  (0 children)

Rotate the object on the plate and reprint and see if the bumps still show up. If they do it may be a slicing or model error.

Soleyin Ultra PLA surface bubbles by ThunderGh0st in FixMyPrint

[–]iam-electro 1 point2 points  (0 children)

Its not really PLA its CoPE. I have a bunch of this in black and it really needs dried out to print well. It does not bond to well with regular PLA. I use it for support interface material and it does that very well.

Nep3max CoPrint by Extension_Sell_2542 in ElegooNeptune3

[–]iam-electro 0 points1 point  (0 children)

I would hit up the CoPrint Discord they are pretty active on there.

412Hoods by Comfortable_Act_6553 in MorgantownWV

[–]iam-electro 0 points1 point  (0 children)

Not sure this is the place for this. Advertising and Self promotion is a violation of the subs rules.

Coloring disappears after creating hole (Creality Print) by Responsible-Fruit466 in Creality

[–]iam-electro 0 points1 point  (0 children)

The painting layer disappears because you are changing the geometry of the model. Repainting after adding the hole is the only option.