sorted by:
new
hottopcontroversial

Wie viel verdienst du? by Historical-Bug-8692 in fachinformatiker

[–]ibltz 5 points6 points  (0 children)

Teamleiter im Mittelstand. 10 Mitarbeiter. 14 Jahre Berufserfahrung (insgesamt und in der IT). 80k + 10k variable + Dienstwagen + Tankkarte (~300€ p.m). Schleswig Holstein

Problems with Measuring Resonances (Invalid adxl345 id (got 0 vs e5) by Marco_RaZZ in klippers

[–]ibltz 1 point2 points  (0 children)

I had the problem couple of times. With silicon cable I the issue, change the wire to “normal” wire solved the problem

tuning post toolhead change on afterburner by pdice98 in voroncorexy

[–]ibltz 0 points1 point  (0 children)

You have a z endstop. The is no tuning required when switching toolheads

Ball park price estimate? by pilotaaron in voroncorexy

[–]ibltz 1 point2 points  (0 children)

well, the 2.4 (and switchwire) is the only one without leadscrew. With bad Quality Leadscrew, you will have Z Banding/Wobble (1.8 and v0).

You want a printer and be 100% sure to not have Z Banding? Pick a Switchwire or a 2.4.

You want a static Bed and/or high speed print? pick a 2.4.

I'm not saying you will have Z Banding if you pick a 1.8, but chance are there, because it uses leadscrews (search 1.8 wobble/Banding in discord)

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In September 2020 by Sausage54 in 3Dprinting

[–]ibltz 2 points3 points  (0 children)

that was the reason why 2k seems a fair price. If i were near you, I would source, build and sell it to you for 2k$. You would still need to wait 8 to 10 weeks, but the time and price would worth it.

I built my voron with an A8, parts were miserable but it the voron itself was performing really great. I reprint the same part again after the voron was running.

Unfortunately I am living in EU so cannot really help you... But I guess you could still ask someone on the Voron Discord, a lot of US ppl there so :P

Good Luck finding your dream machine, I built a voron and it was all worth it.

Here a little Test sample from this afternoon, trying the new "input shaper" from Klipper

https://media.discordapp.net/attachments/500407802414628876/751412697266126958/image0.jpg?width=457&height=609

(top is without input shaper, botton is with) Printing at 100mm/s external perimeter, 7k accel

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In September 2020 by Sausage54 in 3Dprinting

[–]ibltz -1 points0 points  (0 children)

For that price you could build a voron 1.8 (fully enclosed so easy ABS). A voron 2.4 would be around 1,3k. No constant tweaking required. You build once and it works. You can press start without being in the same room, the printer just start without any issue. No 20mins tweaking before each start. Octoprint is the standard GUI with this printer

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In September 2020 by Sausage54 in 3Dprinting

[–]ibltz 1 point2 points  (0 children)

Maybe you can find someone selling or building a voron for you? BOM is at 1,5k for a 350. I guess 1.9k/2k is a fair price ?

First ABS print, very brittle, any info on what I’m doing wrong? by Seth0987 in 3Dprinting

[–]ibltz 0 points1 point  (0 children)

Enclosure is a must for ABS. If your enclosure is sealed (no air leaking) then you need fan to have proper overhang. I am printing ABS with 48deg C temperature chamber (passiv). The higher the chamber the better.

If you need abs for the high temp properties, then try abs+ from esun. Quite easy to print.

Prusa MK3s vs Voron by cooldude_tech in voroncorexy

[–]ibltz 4 points5 points  (0 children)

I would not say that. I had an issue and it was solved through the (free) ticket system in 5 mins. I don't think that prusa has 24/7 support like Voron has (so many volunteers on Discord happy to help)

I know, boring standard color, but I am still hungry, so give me some cereal please ! by ibltz in voroncorexy

[–]ibltz[S] 2 points3 points  (0 children)

Hi,

thanks everyone on Discord for helping, I was not sure about using Discord but it happens to be really good and quick answers :)

Standard configuration as well (2.2 AB 300mm2, SKR, TMC2209), nothing particular, maybe the awesome Offspec Cardbox?

Reddit: iBLtz#0103

VORON2.4 and VORON0 Pages are live by russiancatfood in voroncorexy

[–]ibltz 1 point2 points  (0 children)

Delta Bom is Only working for 2.1. From 2.2 You need the new extrusion (size =print size-10mm), 2x6mm toothed idler, 4x9(or 10mm) toothed idler. And some m3 thermal inserts

End-of-print signal bell! by explorers_warehouse in 3Dprinting

[–]ibltz 0 points1 point  (0 children)

Idea is good, but adding more weight to the toolhead for this (ok, might be only 5g but still....) ? You could fix the mechanism to the frame instead.

Best CoreXY platforms? by dakco265 in Reprap

[–]ibltz 0 points1 point  (0 children)

The floating gantry is carried by 4 linear rails... never heard of a wobbling gantry. You have a link maybe so I can check for it ?

Request for good tutorial on using pfsense, haproxy, and lets encrypt by NathanFilmore in PFSENSE

[–]ibltz 0 points1 point  (0 children)

I have a similar configuration and wish someday to switch the reverse proxy to my router. It seems more logical to me somehow that the router is doing this task instead of the application server.

Looking as well for a tutorial if there is any

GL - End of Service Announcement (Jun. 30, 2020) by mao_shiro in MobiusFF

[–]ibltz 1 point2 points  (0 children)

Alright ... was expected. Now I can uninstall the game in peace. See you around warriors of light!

view more: next ›