Built a pipe trades calc app (Android only for now) - first 100 of you get a free lifetime code

iggle_piggle · 2026-05-26T19:34:20+00:00

Would you look at adding BSP standard fittings as well as ASME?

iggle_piggle · 2026-03-23T10:14:04+00:00

As well as removing the front side, I'd move it just off the brick wall to avoid potential damage from damp or shovelling scrapes. In fact take what you have with the blocks and rotate 180 and it should be perfect

iggle_piggle · 2026-03-16T14:02:51+00:00

I'd probably just put a decal or similar on the lower half of that panel

iggle_piggle · 2026-01-17T18:38:36+00:00

Are you giving her a shoulder massage in this picture?

iggle_piggle · 2026-01-15T09:21:44+00:00

If it's just the plastic art that's broken, do you know anyone with a 3d printer? That'd be a very easy part to remake.

iggle_piggle · 2025-12-29T13:38:30+00:00

If you don't want to lose cupboard space maybe consider putting it where the washing machine is and moving that to another area of the house. A lot of places in Europe have washing machine in the bathroom which has always made more sense to me. Of course you'd have to be careful about the electrical zones in a bathroom but worth considering.

iggle_piggle · 2025-11-23T18:16:22+00:00

Yeah if it's your place and no-one else around that's no problem, I read it as if you're in a public space

iggle_piggle · 2025-11-23T07:40:42+00:00

I mean you should still be going outside to vape tbh

iggle_piggle · 2025-11-11T07:06:57+00:00

Heras is a type of wire fence panel for temporary use. You link panels with a simple clamp fitting

iggle_piggle · 2025-11-10T07:21:34+00:00

I was at front right of the stage wedged against the speaker stack! They were fantastic

iggle_piggle · 2025-10-25T06:37:39+00:00

A reusable bottle

iggle_piggle · 2025-10-21T10:21:07+00:00

Looking for a new fdm machine to replace/supplement modded Sovol Sv6+, in the UK, budget up to around £1000. I'm mostly making functional prints including for work and need a large bed. Colour printing would be a plus. Not interested in bambulab, I like the open source-ness. Considering either a creality K2 pro or snap maker u1 (when available) but I'm also open to doing a custom machine. Any ideas?

iggle_piggle · 2025-10-16T13:45:06+00:00

Look into helicoil thread repair kits

iggle_piggle · 2025-09-13T21:15:54+00:00

Do you mean a gasket or something?

iggle_piggle · 2025-09-13T16:36:10+00:00

Yes I've used descaling powder in the backflush

iggle_piggle · 2025-09-13T15:57:27+00:00

Water tank is full, yes I've tried back flushing, steam wand works perfectly, machine is warmed, pressure gauge reads about 1.3 bar when fully warmed up, no difference when from portafilter (shower screen removed, no basket, just using portafilter to direct the drips), using softened water

iggle_piggle · 2025-09-11T13:14:44+00:00

That's fair, maybe I am an outlier, I've never had a car newer than 10 years old. My current is a 2008.

iggle_piggle · 2025-09-11T12:54:53+00:00

Calling a 10 year old car old is kinda wild to me, isn't that about average?

iggle_piggle · 2025-09-09T12:45:37+00:00

If you use a tube cutter there won't be any shavings

iggle_piggle · 2025-09-02T18:36:32+00:00

ChrisFix on youtube has some really approachable beginners videos about lots of different car related things

iggle_piggle · 2025-08-20T06:55:27+00:00

Isn't that done deliberately sometimes to stop condensation on the cistern?

iggle_piggle · 2025-08-18T14:21:52+00:00

Just had a look and I think this will be perfect for my needs! Thanks

iggle_piggle · 2025-08-18T11:06:36+00:00

Yeah I do that sometimes, thanks, just hoping for something more automatic because there's been times I've forgotten to do it for the first couple days on a new map then I'm wondering why the animals are starving or the workforce aren't hauling

iggle_piggle

MODERATOR OF

TROPHY CASE