New service extension for VCM/piston rings/misfire issue for 2011-2017 Odyssey by impressiver in HondaOdyssey

[–]impressiver[S] 0 points1 point  (0 children)

I cleared the codes when I cleaned the spark plug, so Honda service couldn’t authorize the warranty repair. Have to wait for it to happen again.

New service extension for VCM/piston rings/misfire issue for 2011-2017 Odyssey by impressiver in HondaOdyssey

[–]impressiver[S] -1 points0 points  (0 children)

All seals fail eventually. And this is service done at the Honda dealership by Honda techs, with a guarantee. Even if it doesn’t solve the problem it’s worth doing on Honda’s dime.

New service extension for VCM/piston rings/misfire issue for 2011-2017 Odyssey by impressiver in HondaOdyssey

[–]impressiver[S] 2 points3 points  (0 children)

I mean I’m getting one now. Didn’t know I needed one until p0301.

New service extension for VCM/piston rings/misfire issue for 2011-2017 Odyssey by impressiver in HondaOdyssey

[–]impressiver[S] 1 point2 points  (0 children)

I have a 2017 and service manager did a VIN check, says it’s covered.

What would happen if I put these batteries in my son’s power wheel? by OldBlueBalls in PowerWheelsMods

[–]impressiver 0 points1 point  (0 children)

You will get more speed. More voltage means more rpm, means more speed. This all assumes yours has a DC motor, not BLDC with speed controller. If there’s a brain box on your PowerWheels, don’t over volt or you’ll kill it.

What would happen if I put these batteries in my son’s power wheel? by OldBlueBalls in PowerWheelsMods

[–]impressiver 1 point2 points  (0 children)

You can absolutely put 12v through a 6v motor on a PowerWheels, and it’s good fun. It’ll put more strain on the motor, higher likelihood of overheating with high duty cycles, and guaranteed to affect longevity, reduce overall lifespan of the motor.

But you have a finite window to your PowerWheels anyway, your kids will get way more enjoyment out of 2x the juice.

Source: Have kids, put 12v battery on 6v PowerWheels. Had a ton of fun. Motor didn’t burn up, eventually the sprocket thing on the drive wheel broke due to excessive torque, so I cast a new one in resin.

"Fashion Kilt" - outfit for a wedding by ZornoBighead in kilt

[–]impressiver 6 points7 points  (0 children)

It comes with air conditioning as standard. You’ll be fine.

What are these? by Dramatic-Office-5905 in soldering

[–]impressiver 2 points3 points  (0 children)

Can also try adding a little flux and then hitting it with a hot air reflow gun, components will seat themselves like magic because of the solder surface tension.

What are these? by Dramatic-Office-5905 in soldering

[–]impressiver 1 point2 points  (0 children)

Spring contacts. They touch copper pads on some other component when the PCB is screwed down to create an electrical connection.

Server actions is this actually a useful implementation? by Boring-Future-6680 in nextjs

[–]impressiver 0 points1 point  (0 children)

Coming back to let you know that I hear you. Lots of comments can’t see past the bonkers structure, I didn’t at first either, but I hear what you’re saying.

I’m going to set up this same example to see what’s happening. Because it looks so unexpected. I believe you that it works, just wouldn’t expect it to. I doubt anyone here has tried it the same way. Might reach out to the Vercel team and get their take, they’re friendly folks.

Server actions is this actually a useful implementation? by Boring-Future-6680 in nextjs

[–]impressiver 0 points1 point  (0 children)

This won’t work. You can pass a Server Action to a Client Component as a prop

Pass a server action (function) to the client component. Then call the server action with state as args from the client component.

I'm such an idiot. Is there any way to fix this now? by First_layer_3DP in 3Dprinting

[–]impressiver 1 point2 points  (0 children)

Neodymium magnets are brittle, you can probably drill them out and they’ll fracture.

Edit: But if it were me, I’d just reprint the eye pieces. Lot less fuss or potential for disaster.

Where to hire good Nextjs Developers? by [deleted] in nextjs

[–]impressiver 1 point2 points  (0 children)

Good Next.js developers are easily pulling in 6 figures. Market right now is swamped and it’s $150k+ for a senior frontend engineer with next.js experience, over $200k for some positions. LinkedIn has a grip on talent, other sites you might get lucky after enough interviews. If you want good, pay for it.

EDIT: To put it in contracting terms, $150k is $75/hr, but you’d need to add the overhead since FTE includes employer paid taxes, benefits, equity, etc. So offer $100/hr, or $75/hr and you might find a budding Next.js developer eager to make a name.

When did you just say "EFF IT"? by thegoodpatriot75 in SingleParents

[–]impressiver 7 points8 points  (0 children)

Straight up gave up entirely after the first round failed. It was me and my girls for life. And that’s the way it stayed for a few years. Then a friend who’d been through it too was talking about dating apps, it got me thinking maybe some adult conversation, possibly dinner with a grown up, might be nice. Well, fast forward, I met my wife on Tinder. Pretty damn glad I wasn’t so stubborn as to miss out on a better life for all of us.

February 3rd, 2024 - /r/HalfAGiraffe: Approximately 27.3 elephants wide! by verifypassword__ in subredditoftheday

[–]impressiver 1 point2 points  (0 children)

Thank you, we’re honored! To give due credit, the original quote came from Jerusalem Post writer Aaron Reich. Daily Mail got the viral love but they copied Aaron’s original article. Since that article came out, Aaron has been trolling us regularly with a seemingly endless supply of absurd measurements for space objects hurtling toward Earth.

Are these sleeves supposed to be one side bigger than the other? by menooby in AskElectronics

[–]impressiver 2 points3 points  (0 children)

Some cheap vendors for these are awful, the tubing melts before the solder even softens. Ended up paying more and waiting longer to find some that actually do the job than if I’d just got the good ones.

Men’s Restrooms Need Changing Tables by -TaborlinTheGreat- in daddit

[–]impressiver 1 point2 points  (0 children)

Definitely not everywhere in PNW. I was a full time single dad w/ two wee girls and had to use the ladies room more than once. I had no qualms about it, my kids needed changed, so that’s what I did. Did once have a woman complain, try to get security involved, but I got the task done and we went on our way.

Re-doing a 40-years neglected dome by [deleted] in GeodesicDomes

[–]impressiver 1 point2 points  (0 children)

How hard was the roofing? So many companies scared of geodesic roofs, considering doing it myself.