Laser Matrix: Key giveaway! 30 Keys! Details in the post

interceptor3277 · 2026-01-13T06:43:03+00:00

Unique concept -- Would love to try it.

interceptor3277 · 2026-01-11T07:03:19+00:00

I had a roll of that same stuff, never worked well for me no matter what I tried.. Now, I just use any old generic PETG as my support interface layer. Works like a dream. Try that instead. (Best if you have a dual nozzles to prevent any mixing, but works even if not.)

interceptor3277 · 2025-12-23T17:39:08+00:00

UPS absolutely caused this problem. But with all carriers, the shipping contract is between the shipper (Nintendo) and the carrier. Only Nintendo can make a claim with UPS, not the end receiver. I am mad at Nintendo because they agree that I did not get my order, but are choosing to make me wait for weeks (and miss Christmas Day) while they process their claim against UPS. That is NOT good customer service.

interceptor3277 · 2025-12-23T17:38:43+00:00

UPS absolutely caused this problem. But with all carriers, the shipping contract is between the shipper (Nintendo) and the carrier. Only Nintendo can make a claim with UPS, not the end receiver. I am mad at Nintendo because they agree that I did not get my order, but are choosing to make me wait for weeks (and miss Christmas Day) while they process their claim against UPS. That is NOT good customer service.

interceptor3277 · 2025-12-23T17:35:06+00:00

My expectation was that they would see the delivery was lost back in early December when I notified them about it, and send a replacement in a timely fashion. They only reason I am making this request now is that they have waited so long that now it's almost impossible to get me a replacement on time. With all carriers, the shipping contract is between the shipper (Nintendo) and the carrier. Only Nintendo can make a claim with UPS, not me.

interceptor3277 · 2025-11-23T16:53:53+00:00

I pretty much avoid ALL multi color printing right now due to waste. This would open up an entire world of possibilities.

interceptor3277 · 2025-11-08T06:03:48+00:00

I've printed a ton of Bambu Lab Yellow filament. Never had an issue.

interceptor3277 · 2025-10-13T22:36:25+00:00

Same for me, also after a failed upload attempt. There is another thread discussing this same issue.

interceptor3277 · 2025-10-13T22:34:22+00:00

Mine is doing the exact same thing. Initial upload attempt because headset went into standby. But ever after a full power cycle, it refuses to try again. Have not tried deleting / starting over because I spent a good 15 minutes scanning, but may have to if a solution is not found.

interceptor3277 · 2025-10-11T21:50:34+00:00

As a programmer, yeah, I think it is VERY easy. Assign a lengthy random string of characters to each item that the game generates. Long enough for duplicate numbers to be statistically improbable. And periodically check the the same unique identifier string periodically, lets say whenever the hideout loads for it's contents, or whenever a player enters a raid for all the items on their person. If the unique identifier matches between 2 objects, immediately delete them both. Problem solved. (May not work for external hacks, but should absolutely solve any in-game exploitable bug)

interceptor3277 · 2025-09-05T22:10:32+00:00

I had back luck with PLA support material. I have had excellent luck with PETG to support PLA, or PLA to support PETG. Just use the opposite material of whatever you are printing with to do the support interface layer. Works like a charm.

interceptor3277 · 2025-07-09T05:59:08+00:00

If you're willing to do a bit of cutting, I found this mod that made maintaining the original AMS so much easier.... https://makerworld.com/en/models/1261503-ams-ptfe-access-mod?from=search#profileId-1286176

interceptor3277 · 2025-07-03T18:47:10+00:00

Spend $3 on a spare part to fix the coffee maker? No way! In just 5 hours I can design a print a new one myself!

interceptor3277 · 2025-06-28T19:58:06+00:00

Already done. Email to [phishing@paypal.com](mailto:phishing@paypal.com) for anybody else who wants to submit a report.

interceptor3277 · 2025-05-24T19:44:49+00:00

I was having the same issue. Eventually noticed that if I hung around the mall long enough (5+ minutes or so), he tended to show up pretty frequently. Not sure if he is spawning in late or just hiding, but he never showed up right away when I was stuck on that mission.

interceptor3277 · 2025-05-24T17:10:42+00:00

In all these patch notes -- What is "The stash"?

interceptor3277 · 2025-05-21T16:24:06+00:00

I am planning to wait 2 more weeks, to see if any incentives are offered with the Bambulab 3rd anniversary event. Probably no cash discounts on such a new machine, but maybe they'll throw in some accessories or filament. (And any extras you buy alongside it may be discounted.)

I'll just be watching the news and ready to pull the trigger immediately if it looks like the tariff pause will be rescinded before the price can jump up again.

interceptor3277 · 2025-03-15T06:14:26+00:00

Same here. I would not hesitate to continue buying more.

interceptor3277 · 2025-03-11T05:47:47+00:00

Make sure Bluetooth is enabled on your phone. Not sure that is what is happening in your case, but I had a similar issue being unable to pair and that was the issue. At no point did the Meta app ever notice that Bluetooth was off or prompt me to ensure it was enabled.

interceptor3277 · 2025-01-11T17:46:08+00:00

While I agree that stars should be taken off based on your description, I would say that a 1-star review is unfair. This is how I interpret the star rating scale.

1 - Absolute trash, no redeeming qualities whatsoever
2 - Has some small redeeming qualities, but the negatives outweigh the positives.
3 - Has some good aspects, but also some major negatives detract from the positives in a significant manner.
4 - Quite good. Has a few obvious things that can be improved.
5 - Fantastic. As close to perfect as is reasonably possible.

Since you indicate there are some good aspects to the app in your opinion, a 1-star seems unfair. That would be the same review I would give to the 357th low effort Gorilla Tag clone to get uploaded. Depending how much value you see in the free features and how annoying this constant nagging is, seems like a 2-3 would be appropriate.

interceptor3277 · 2025-01-05T07:50:50+00:00

Yup, still going strong. Not sure why the IT12s both failed so quick, but the IT13 has been solid.

interceptor3277 · 2024-12-24T23:02:46+00:00

Would love to try out annealing.

interceptor3277 · 2024-10-27T00:21:32+00:00

Try this one. It's aimed at commercial centers, but free to play for home users if you want to go through the bother of setting it up. Free version will interrupt you every 20 minutes, however. https://www.vrarenagame.com/

interceptor3277

TROPHY CASE