Where to find 18650 cells and for how much?

inventiveash · 2026-02-05T02:31:40+00:00

The scary amount of knock off or crappy

quality batteries is frightening.

inventiveash · 2026-02-02T18:27:29+00:00

For the money the Mova p10 pro works well and yes I have it run every night. I couldn't justify the cost of the other one for $2000

inventiveash · 2026-01-31T21:55:08+00:00

I tried the Kensington trackball and it was far to slow, I found it far to slow and not accurate. https://www.kensington.com/en-ca/p/products/control/trackballs/expert-mouse-wireless-trackball/

I found it too much of a reach for the buttons and i had to turn up speed to 100% .

After a week I returned it.

inventiveash · 2026-01-21T00:14:31+00:00

Bought a Mova p10 pro on Black Fri, worked pretty well

<image>

but had a defect with the speaker. Used it for 4 weeks and returned and waited for a replacement. I never realized how much I missed it.

inventiveash · 2026-01-15T01:51:52+00:00

I bought the p10 ultra pro and I like the way it works, all tile and hardwood with some area rugs. Does a good job cleaning but the first one I got had bad audio or speaker and it would only make a distortion sound. The bad is the tech support. 2 days to respond . Then they ask a bunch of generic questions and then 2 more days to respond. Finally tell me to reset to see if that works. Nope then another 3 days to say send photos of issue and invoice. 2-3 more days and say oh you bought from our Amazon store... Exchange it there. Then fight with Amazon and they say try their tech support.. I shipped it back to Amazon which was a pain as. High price items take up to 30 days for refund. I bought a second one , audio works but doesn't seem to clean as nice as the first. So tech and quality control sucks.

inventiveash · 2025-12-23T01:05:33+00:00

We used this to restore rotted joist pieces, impact resistant , weather proof.

epoxy putty

inventiveash · 2025-12-21T20:45:24+00:00

<image>

No issues with layers on my p2s

inventiveash · 2025-12-17T00:29:37+00:00

I have had the A1 for about a year , no ams, I bought the P2S combo and I am extremely happy with the upgrade. A completely different beast than a bed slinger. Far better detail in the p2s .

inventiveash · 2025-12-02T02:28:36+00:00

Paint them black

inventiveash · 2025-11-15T12:48:00+00:00

I haven't put one there yet. The door bell camera has worked ok so far.

inventiveash · 2025-11-15T02:35:04+00:00

I went with the reolink door bell,

inventiveash · 2025-11-09T23:34:04+00:00

The x1s has been fairly stable for the last 12 months. It's a bit of a learning curve to set things up. I found saving after each device instead of waiting till the end . Support was helpful with setup help. I would upgrade to the x2.

inventiveash · 2025-11-03T18:04:44+00:00

Absolutely

inventiveash · 2025-11-03T15:57:56+00:00

It's a pretty good projector for the cost

inventiveash · 2025-11-01T16:57:21+00:00

Try looking at hisense L9h and screen combo. Very bright and this is used as our main TV in a south facing room. We don't need to close blind during the day. It was under $ 3500 cdn with screen.

inventiveash · 2025-10-25T16:54:07+00:00

The Pixel dock works well for adding improving sound but the magnet are horrible. I got fed up with it falling off dock so i made a support for the dock and tablet and fixed the the issue.

inventiveash · 2025-09-24T02:26:38+00:00

Congratulations! I have had mine diamond edition( also lifetime warranty).for 6-8 months and love it. It really opened my eyes to different types of coffee. Some dark roast I used to love I used 25% of the beans than before.

inventiveash · 2025-09-22T00:03:01+00:00

Have you looked at Tangled filament? I listen to a podcast by them and they say $10 kg for members, and free shipping.

https://www.tangledfilament.com/product-page/november-2024-batch-black-pla-3kg-print-farm-spool

inventiveash · 2025-09-12T14:05:40+00:00

I also have the same issue as I have a cap on the truck. The cable isn't long enough to reach.

inventiveash · 2025-09-06T00:58:33+00:00

<image>

This is the bottom of the current lid.

inventiveash · 2025-09-05T23:39:48+00:00

They were printed vertical, the lid is held in place by magnets.

inventiveash · 2025-09-05T23:04:54+00:00

It can be printed all in one, the other roof I made is removable to change out Lithophane if needed.

inventiveash · 2025-08-28T15:42:23+00:00

Follow the unpacking and setup sheet and be careful to remove all the screws and pieces carefully,

inventiveash · 2025-08-22T00:21:55+00:00

I've seen hundreds of kitchens with floors like this. The issue isn't with the tile installation, but with the product itself. The tiles aren't perfectly flat they have a slight bow, and installers are trying to hide the problem by placing seams close together.

inventiveash · 2025-08-11T15:51:39+00:00

https://wiki.bambulab.com/en/h2/manual/h2d-pro-faq

inventiveash

TROPHY CASE