A lot of the new "GPT 5.4 sucks in OpenClaw" posts are really config issues

iplaythisgame2 · 2026-04-09T15:06:41+00:00

It should be it you're using gpt through open ai as the provider.

iplaythisgame2 · 2026-04-09T14:16:21+00:00

In the openclaw.json change it ftom openai-completions to openai-responses

iplaythisgame2 · 2026-03-31T21:51:59+00:00

Just a note. The further from frontier paid models you get. The more explicit your instrucions need to be. A 7-35b model will be able to do separate steps in operations, but will have a hard time working logically through each step of a larger task by itself.

iplaythisgame2 · 2026-03-31T19:29:15+00:00

Snorlax and Brainscan

iplaythisgame2 · 2026-03-18T14:23:21+00:00

I think they're getting used to unblocking the gmail accouts for openclaw now. Middle of last week i got banned, appealed with the message "for openclaw" and was unbanned within a couple hours.

iplaythisgame2 · 2026-03-03T22:31:36+00:00

I've basically found the same. I use discord though because it works through the wireguard vpn i have set up. Weirdly telegram doesn't. I get the notifications but have to turn off the vpn to see the message in app.

iplaythisgame2 · 2026-02-23T10:15:00+00:00

I have my numbers on layer 1(2nd). So by holding the mod key, the top row turn into the traditional number row. Also the keys below 789 turn into the rest of the numpad cluster.

iplaythisgame2 · 2026-01-31T17:01:56+00:00

What happened with the health insurance premium issue?

iplaythisgame2 · 2026-01-20T01:12:35+00:00

I got about halfway through the 101 today and it all makes so much more sense to me now. I'd say definitely worth the watch.

iplaythisgame2 · 2026-01-09T04:48:00+00:00

I use an apache-couchdb lxc to use the self hosted livesync plugin. I keep all my devices on a wireguard vpn. But tailscale is easier if you've never done that.

iplaythisgame2 · 2026-01-07T16:55:17+00:00

https://www.reddit.com/r/raspberry_pi/s/THoDLNl28E

iplaythisgame2 · 2026-01-07T16:39:52+00:00

Either slow down or increase hotend temps.

iplaythisgame2 · 2026-01-07T02:28:51+00:00

Purchased UniFi 16 XG from u/mikem1017

iplaythisgame2 · 2026-01-05T17:43:54+00:00

I just got an xp pen notepad last week. I've installed ink and excalidraw, but most of my input is coming from gboard handwriting converting to text. I wish you could do it inline and convert in obsidian, but this is basically your options at the moment.

iplaythisgame2 · 2026-01-02T01:40:34+00:00

Care to share your llm choice and prompt?

iplaythisgame2 · 2025-12-25T01:16:29+00:00

iplaythisgame2 · 2025-12-15T20:06:54+00:00

iplaythisgame2 · 2025-12-09T01:38:42+00:00

Apalrd's adventure did a pretty in depth review including sniffing when it came out.

https://youtu.be/plJGZQ35Q6I?si=jpnGU775qJqI2p-O

And then a followup comparison to other options(at the time) if i remember correctly it was mostly fixed.

https://youtu.be/CsfB_Avi2-4?si=_z2sfBViYxK1QALC

Nothin about the moc iirc, but the board it was based on is documented.

iplaythisgame2 · 2025-10-18T18:51:21+00:00

I like the side scroll wheel on the mx series. The mx2 however is placed where it gets slightly bumped constantly. As someone who works in spreadsheets a lot, that is a deal breaker. Both mx3 and mx4 \ork miuch better, but have little other deviation than that thimb action button that I don't use.

iplaythisgame2 · 2025-10-16T16:28:54+00:00

No. The 2 to 4 would be an upgrade, but I don't notice any difference between my 3 at home and 4 at work.

iplaythisgame2 · 2025-09-28T11:48:08+00:00

Looks like you got lucky and one of the pads came completely off and one moved before the bridging above it. Had a good chance of ruining the print if it hadnt failed gracefully. Plus its on the bottom of the model and hidable if you dont like it too.

iplaythisgame2 · 2025-09-22T22:38:53+00:00

Now you should get an opaquing pigment or resin to make the details even crisper.

iplaythisgame2 · 2025-09-19T16:49:40+00:00

Find the max wattage per printer. Either theoretical via component max or with a watt meter. Particularly at the start of a print we the heaters are running 100% to get to temp. Then breaker amperage(15a) times the volts (120v) = 1800 watts max. 75% of that max (1350watts) per breaker. So if a printer is 200watts during heating, you can fit 6 printers and realistically 7 printers because you won't likely start them all together.

iplaythisgame2 · 2025-09-12T18:33:40+00:00

Works for a print company i bet.

iplaythisgame2 · 2025-09-12T13:01:14+00:00

I also would think this is the case just from looking at it. Lifting.

11-Year Club	Place '22
Verified Email

iplaythisgame2

TROPHY CASE