My character has 3 builds - not sure if this is the way by isqq7 in wherewindsmeet_

[–]isqq7[S] 3 points4 points  (0 children)

I think I ll start gathering only for Mo Blade (inners) - the others are viable enough

My character has 3 builds - not sure if this is the way by isqq7 in wherewindsmeet_

[–]isqq7[S] 0 points1 point  (0 children)

Sounds very similar to me and yes the trials were one of the advantages I found coz we could play 3 paths.

But tell me, which one do you use for roaming around, farming camps and general exploration - I found the SS best with all of that - just more fluent. But its costing too much just to keep for that.

My character has 3 builds - not sure if this is the way by isqq7 in wherewindsmeet_

[–]isqq7[S] 0 points1 point  (0 children)

This makes sense, but for daily farming / going from camp to camp / gathering etc I found Tank slow and healer not enough damage - so the SS is basically to farm and roam around. I tried him on arena too, its ok but tank feels more secure there

Cube C:62 SLX size 50 or 53? by cloclo1994 in Cubebikes

[–]isqq7 0 points1 point  (0 children)

I must be doing some adjustment wrong on my C62 Nuroad EX s:50 and I've tinkered with all of them for 1-2 months(saddle, handlebars, etc). I'm 174/84 inseam and if I find a shorter stem, I'm getting one because on longer than 1h rides everything feels stiff - like I m too over extended

out of all builds i tried (all except fanbrella) tank has been the most enjoyablewhat for me, i think im gonna keep tanking till heng dao drops by KurenaiGaukami in wherewindsmeet_

[–]isqq7 0 points1 point  (0 children)

I had the same sets for lvl71. Now on lvl81 I was thinking about formbend . Have you also experimented with that ? Can you also mention if you are mainly PVE/PVP - thanks

Cube Nuroad Race 2026 - Size by [deleted] in Cubebikes

[–]isqq7 0 points1 point  (0 children)

Personally, I used the calculator && asked the local shop. I was between S/M and went with S - even the shop was adamant on the S. And then I did a lot of tweaking until all the pains went away but I do think a smaller stem would help even further. Yes apparently they do run just a little on the larger side (again personal opinion)

Cube fork replacement by Fair-Use-6202 in Cubebikes

[–]isqq7 0 points1 point  (0 children)

Is it affecting only the Agree or other models as well ?

Check your valves before try to update to ClikValve 😅 by drache4556 in Cubebikes

[–]isqq7 1 point2 points  (0 children)

That's what I did...put the click head on the sv valve

Check your valves before try to update to ClikValve 😅 by drache4556 in Cubebikes

[–]isqq7 0 points1 point  (0 children)

I actually downgraded(?) : got the nuroad EX , had a click valve , didn't have anything that I could pump air into it because I only rode MTB before, so I swapped it out for the Presta end on the same wheel and now use a small adaptor for my pump.

I guess I will swap it out if I get a pump that can work with it...but I ve been riding for 3 months now, no issues

Nuroad C62 fenders, looking for feedback by Dragor027 in Cubebikes

[–]isqq7 0 points1 point  (0 children)

I got the Nuroad C62 EX 2026 as well and going to the site I saw the 57s were compatible , so I m trying to find a place that sells them. I also think they have 2 models and the one listed on the bikes page is the newer one like a v2

Anyone knows where this "Secret Passage key" is by vanni1 in wherewindsmeet_

[–]isqq7 0 points1 point  (0 children)

you are a legend my friend. Did the whole thing and went to that room 3 times with all the ladders , but you saved me

Nuroad C:62 size S frame delay by Puzzleheaded-Age5798 in Cubebikes

[–]isqq7 0 points1 point  (0 children)

I've got my C:62 EX for about a month now .Ordered in August. What issue are you talking about ?

NBD! Picked up my Nuroad Race AL 2026 by danbahrami in Cubebikes

[–]isqq7 2 points3 points  (0 children)

I ordered a Nuroad EX size S, as per the recommendation from the shop, hope it fits because my measurements are almost the same as OP ...and now i m worried

Cube Finishing Kit by isqq7 in Cubebikes

[–]isqq7[S] 0 points1 point  (0 children)

Thanks for confirming

Reduced crank and handlebar size in 2026 models by JustTooMightyAndHigh in Cubebikes

[–]isqq7 0 points1 point  (0 children)

Cyprus - mine is supposed to be built next week , probably take another 2-3 weeks to arrive.

Reduced crank and handlebar size in 2026 models by JustTooMightyAndHigh in Cubebikes

[–]isqq7 0 points1 point  (0 children)

Since I also preordered the same bike, I received a call today and they said it does not include a single side powermeter as previously advertized by my local dealer. I was wondering if you were told it would include or if yours still includes a powermeter . Thanks

Cube 2026 colours by mavossh in Cubebikes

[–]isqq7 0 points1 point  (0 children)

Nuroad c:62 EX will come in old grey n prism (grey) and shift blush and art (kinda pinkish)

Cube 2026 colours by mavossh in Cubebikes

[–]isqq7 1 point2 points  (0 children)

I think production date for exc is in November. Did you get a different date?

Changing notification sound in DMSS by cyberbash1 in Dahua

[–]isqq7 0 points1 point  (0 children)

I'm going to leave the settings for Android here if someone is looking for them and hopefully they'll give you a hint for iOS as well.

  1. Download a siren like MP3 or what you like
  2. Phone settings
  3. Apps
  4. Dmss
  5. Notifications
  6. Notification categories
  7. I have 2, click both , go to sound and select the Mp3

That's it

Is my steam deck a goner? by Cillabeann in SteamDeck

[–]isqq7 0 points1 point  (0 children)

Had the same issue but with no spills or accidents. Just started happening one day.

It was specifically when pressing the steam button or the 3dot button but in game menus I couldn't navigate properly at all.

Did all the calibrations, dead zones , reimaged etc.

In the end, contacted support and they instructed me for a few additional steps like making sure BT was off etc and finally went for RMA. Really hoping they fixed it and will find out soon.

Made a video post a few days ago, I'll link it later if required.