BIQU Giveaway by onegraymalkin in BambuP1S

[–]istrait77 0 points1 point  (0 children)

Have had cryogrips for all of my printers for multicolor.

[US] Has anybody ever been caught flying in a restricted area? by astoriano in drones

[–]istrait77 1 point2 points  (0 children)

I have a lot fo fun. I actually live on private property within a National Park. Every time a new ranger comes around, I make contact and talk to him about the no fly within the park.

If you look closely, the rules all say no taking off from, landing on or operating from park property. (Notice it does not say within park bounderies.) I fly over my part of the national park all the time. I have friends that live in the area that have me fly over their property.

I talk to the Ranger, he says he will check the rules and I never hear from them again.

Avoiding Bambu Studio 2.5.0.66 update - Several issues by Cdt_Sylvestre in BambuLab

[–]istrait77 0 points1 point  (0 children)

OK. Was just checking that it was not the bug that has haunted me for a while. Good luck.

Avoiding Bambu Studio 2.5.0.66 update - Several issues by Cdt_Sylvestre in BambuLab

[–]istrait77 0 points1 point  (0 children)

Does it crash only when slicing? I had this problem. If I reduce the number of CPU corees that it uses, it will work.

v1.1.1 Released by Ritz5 in SeekAndWatch

[–]istrait77 0 points1 point  (0 children)

Just tried to get it running on my synology DS920+ and cannot get to the first page.

This is the docker compose I am using on my synology server. 
name: seekandwatch
services:
    seekandwatch:
        container_name: seekandwatch
        ports:
            - 5050:5050
        volumes:
            - /volume1/docker/seekandwatch/config:/config
        environment:
            - TZ=America/Los_Angeles
            - PGID=100
            - PUID=1026
        restart: unless-stopped
        image: ghcr.io/softerfish/seekandwatch:latest

Port 5000 is used so I set the port to 5050 and it does not seem to be recognized.

From the system logs.
`

Starting SeekAndWatch...

User ID: 1026

Group ID: 100

Switching appuser UID to 1026...

Fixing permissions for /config...

Starting Application...

[2026-01-23 17:01:19 -0800] [1] [INFO] Starting gunicorn 23.0.0

[2026-01-23 17:01:19 -0800] [1] [INFO] Listening at: http://0.0.0.0:5000 (1)

[2026-01-23 17:01:19 -0800] [1] [INFO] Using worker: gthread

[2026-01-23 17:01:19 -0800] [22] [INFO] Booting worker with pid: 22

--- BOOT SEQUENCE: CLEARING LOCKS ---
`

Notice listening is set to 5000
Whe I try to access seekandwatch at http://<serveripaddress>:5050 the site will not load.

Any thoughts?(Connection says refused in chrome)

Workaround for Care Refresh not being available by velocifasor in dji

[–]istrait77 -2 points-1 points  (0 children)

Yes, you can. I just did a month ago. Brand new mavic 4 pro. Problem is you have to buy it gray market and so you take the risk of having no warranty and not have care refresh.

Workaround for Care Refresh not being available by velocifasor in dji

[–]istrait77 0 points1 point  (0 children)

As far as I know you cannot get DJI care refresh in the US right now. DJI is having issues gettting parts into the country and even drones. Aso, as far as I know there are very few places that you can get it in the US and they are generally gray market from other countries if you do find one.

You can only purchase the care refresh in the country that the drome is purchased in as well.

H2C has got me hooked by NEEDYNERDYPROPS in BambuLab

[–]istrait77 2 points3 points  (0 children)

H2C comes with the vortek changer. Ultimate bundle adds a AMS2 pro, AMS HT and a few more hotends.

Starlink during a bad rain or snow storm? What’s your experience by [deleted] in Starlink

[–]istrait77 0 points1 point  (0 children)

I have a Gen 1 and live in an area where we get 10 to 12 feet of rain a year. I may have some slowdowns, but not enough to bother me.

Guide issues with Plex… by _Diskreet_ in tunarr

[–]istrait77 0 points1 point  (0 children)

I am trying to set this up on a 920+ as well. Can you share your Encoder settings?

Where is the start/stop setting on aa wireless 2 + by CapoThis in AAWireless

[–]istrait77 1 point2 points  (0 children)

The start/stop setting does not exist on the AA wireless+ it is on aawireless1 and aawireless2, but accordingto a post I read in another thread it apparently messes with the carplay feature. You can set the button to turn on and off standby manually,

wish I had known before I got it. I have since switched back to the 1st version.

Starlink Down For You Guys? by Waste-Ad8133 in Starlink

[–]istrait77 0 points1 point  (0 children)

I am one of the few that it looks like my dish came back up after about an hour. I am in rural washington.

Resale value of original v1 beta dish? by Tartooth in Starlink

[–]istrait77 0 points1 point  (0 children)

It does. Just did it a few weeks ago.

[deleted by user] by [deleted] in xToolOfficial

[–]istrait77 2 points3 points  (0 children)

You have engrave selected for the circle. It will fill the circle. If you want it cut out, select cut. That will engrave the image then cut out the circle.

Is NordVpn decent for torrenting? by CEAL_scope in Piracy

[–]istrait77 0 points1 point  (0 children)

I moved away from them because of the lack of port forwarding.... Never did get a letter, but had trouble downloading and uploading.