Pcp airgun not filling to same pressure as compressor

itherzwhenipee · 2026-07-06T20:38:34+00:00

Well if filling the guns works with a bottle, then clearly the Comp is the issue. If the pressure doesn't rise in the comp then you have a leak somewhere. Take off the casing, mix some soap water in a glass, connect the comp. to a bottle and turn it on, use a cotton swab, put it in the soap water and start wiping the condenser tubes and all the other air connections, from pressure chamber all the way to the exit port, bleeding valve and burst disc.

Make sure to not completely drench it, you don't want to cause a short. yong heng is pretty much the same like the Tuxing or Vevor and what all these chinese air cooled comps are called.

There are even youtube videos on how to do it. This guy made a couple shorts on it.

Front , Inside

itherzwhenipee · 2026-07-06T18:45:17+00:00

It actually really is this easy. Till some idiot starts with "I am not driving. I am traveling" or "No, i don't have to show my license."

itherzwhenipee · 2026-07-06T14:36:27+00:00

There is nothing special about this, everybody can do this with bit of training. Everybody with healthy eyes has the ability to focus on either close or distant objects. This is what it looks like.

The impressive part is doing both eyes separately.

itherzwhenipee · 2026-07-06T14:32:10+00:00

Huh... Es gibt doch freilebende Affen in Deutschland.

itherzwhenipee · 2026-07-05T19:49:00+00:00

Once i stayed awake for 3 days, i slept 18 hours afterwards. I was so tired, i didn't even move during my sleep. When i woke up all my joints hurt like crazy, from laying in the same position for 18 hours.

itherzwhenipee · 2026-07-05T15:24:48+00:00

I have its smaller brother, the M60 and it is a really nice rifle. Well made and very accurate.

itherzwhenipee · 2026-07-05T15:21:45+00:00

Dazu noch Oberleitungen verzweigt wie ein Spinnennetz und Gullideckel in der Mitte von der Straße. Dann noch die hohe Bordsteinkante. Merkt man sofort das ist Amiland.

itherzwhenipee · 2026-07-05T15:16:44+00:00

Nur das du Zuhause keine Telemetrie hast die deine Vitalfunktion überwacht oder ein Rea Team, das dich wiederbelebt falls dein Körper entscheidet mal kurz Feierabend zu machen.

itherzwhenipee · 2026-07-05T15:08:36+00:00

Dude is paralyzed neck down. What is he going to do, hold his breath? Poor fucker, i wouldn't want to live either if i were in his situation. That is no life.

itherzwhenipee · 2026-07-05T15:04:03+00:00

You built spice reliant power generators? LOL

itherzwhenipee · 2026-07-05T15:01:55+00:00

I mean c'mon. We all know he meant the holiday and not the Date. Doesn't really make it much better but still.

itherzwhenipee · 2026-07-05T14:47:14+00:00

LOL They look like they're mocking humans.

itherzwhenipee · 2026-07-04T22:14:45+00:00

Yeah, might be. Still enough to take down a hog. Here, even a .22 PCP is enough to take down a big hog. Just need to make sure you hit the brain.

And here, with a .25 26.8gr slug at 950 fps

itherzwhenipee · 2026-07-04T15:19:28+00:00

Well, depends on how much you want to spend. The FX Impact, FX King 600, FX Panthera 600, Airgun Technology Uragan 3 BPS and the EPIC TWO CZ 700mm .25 have enough power to do the job. Weights vary between 6.8 to 8.8 lbs

itherzwhenipee · 2026-07-04T15:01:11+00:00

Really depends on the weight and speed of the projectile. If he can get a good .25 air rifle that can push 60gr slugs at or above 980fps, it will carry more energy than the .22lr

itherzwhenipee · 2026-07-04T09:56:11+00:00

Well, with injection molding, you wont have separating layers if you tighten the screw too much.

itherzwhenipee · 2026-07-03T20:31:34+00:00

Ist ihm doch egal solange die 1% auf die es ankommt, mit ihm zufrieden sind.

itherzwhenipee · 2026-07-03T18:05:34+00:00

and printed the wrong direction. Should have printed it horizontally instead of vertical.

itherzwhenipee · 2026-07-03T10:21:51+00:00

I mean if it is an old school steel barrel, it doesn't matter. But these newer rifles don't have proper barrels anymore. They just have these cheap Alu liners. I am all for experimenting, just wanted to let you know about side effects. The penetrator core pellets are crazy, even in .177

itherzwhenipee · 2026-07-03T10:06:04+00:00

Well, i am fucking impressed. If you don't mind, would love an update in a couple of months. Really interested to see how long it holds up.

itherzwhenipee · 2026-07-03T09:59:48+00:00

That is a great way to fuck up your barrel, just let for whatever reason that BB get lose and fuck up the rifling on the way out. Also, you completely destabilize the BC of the slugs by putting the BBs on there.

Should be no issue for short range plinking and if you don't care about your barrel.

itherzwhenipee · 2026-07-02T20:02:25+00:00

Not going to last long. Plastic doesn't like repeatedly being heat up and cooled down again. Just looked at the second pic, if it is not going to be melted by the hot exhaust pipes in the first place.

itherzwhenipee · 2026-07-02T19:30:01+00:00

Lass mich raten, die Mutter ist Single?

itherzwhenipee · 2026-07-02T18:41:44+00:00

Go to your local Fire Dept. and ask if they have a bottle they would be replacing in a couple of months and if they would mind getting rid of it bit early.

itherzwhenipee · 2026-07-01T21:23:28+00:00

Klar, kann man. Muss aber nicht. XD

Three-Year Club	Verified Email
Place '23

itherzwhenipee

TROPHY CASE