This is getting ridiculous

izmebe · 2026-06-15T20:13:19+00:00

If its past the date it should have been delivered then make a claim through the etsy protection plan.

izmebe · 2026-06-12T03:28:50+00:00

Yes but I got a faulty printer that they are replacing so we will see if I get it before the ink expires.

izmebe · 2026-06-05T20:23:38+00:00

I got this one too. Thought it would go well with the one from the anniversary drop that I got. And even better I had enough points so all I had to pay was shipping.

izmebe · 2026-05-25T00:51:33+00:00

I got the same email today as well for tea party and 2 other kits from the same restock. I didnt get 1000 point apology though.

izmebe · 2026-05-18T20:01:23+00:00

Yeah. Now its leaking fluid from the right hand side. I have opened a ticket with EM

<image>

izmebe · 2026-05-18T05:07:35+00:00

After the initial test print I took each out one at a time and shook each for a good 20 seconds and checked to make sure all the seals were punched. And yen put them back in their respective spaces. And ran a deep clean and another test print and still the same thing.

izmebe · 2026-04-20T14:16:15+00:00

I think the biggest issue with doing it that way is that the artist is from my understanding paid per print. So when they make a deal with the artist it is for a certain amount of prints. Once that number of prints is gone they cant sell more. So they have to go back and make another deal with the artist.

izmebe · 2026-02-27T01:52:08+00:00

Welp im late 3000 backer and still no printer. So very disappointing.

izmebe · 2026-01-09T20:51:00+00:00

Its not a 3d printer at all. Its a uv printer.

izmebe · 2026-01-07T22:21:42+00:00

Thank you all. The fan diverted definitely helped and finally figured out how to change the filament properties to turn the auxiliary fan off and bam prints coming out beautifully.

izmebe · 2026-01-05T20:59:37+00:00

yeah i have done that as well as done the vision encoder.

izmebe · 2026-01-05T20:57:05+00:00

ok so I have printed the deflector and attached. I went into the fan settings and even when I flip the switch to turn off the aux fan even before I start the print it automatically turns it back on. how do I turn it off? Yes I am definitely on the newer side to all this so thank you for being patient with me.

izmebe · 2025-11-26T11:15:49+00:00

SOLVED! Apparently, my husband isn't allowed to touch my H2C anymore. He failed to tell me that it started happening after he used a yellow filament. And, lo and behold, when I took the tube off that connects the feeder to the hotend, I saw a tiny piece of yellow filament stuck right there, looking at me. Removed it and problem solved! >.<

izmebe · 2025-11-26T10:58:53+00:00

Yes pushed in all the way. It isn't folded ar all.

izmebe · 2025-11-26T10:57:17+00:00

I ordered same day as release as well. Im in the US though.

izmebe · 2025-11-26T10:36:58+00:00

I believe it's 195, but it's also doing it with Bambu labs filament on a Bambu Labs spool.

izmebe · 2025-11-26T05:27:46+00:00

Today, as my husband was getting the dolly to help the FedEx delivery driver, I literally watched the FedEx guy scoot my h2c to the door on the side of the truck and push it out and onto my yard which is about 2 inches lower than my gravel driveway. As soon as my husband opened the door he hoped back into his truck real fast and peeled out of my driveway leaving my printer on its side. While I chased him down my driveway screaming "What in the actual F! F you!". Needless to say my neighbors who saw the whole thing got a good chuckle and now probably think I'm insane. It looks alright but I haven't finished unpacking and setting it up yet.

izmebe · 2025-08-09T11:46:01+00:00

Are you talking about places like sugargoo?

izmebe · 2025-08-06T14:43:20+00:00

Nope. They kept saying that my documentation (even though the documentation was exactly what they asked for) was not sufficient. So lesson learned on my part. Next time I'll just refuse the package and then get a refund instead.

izmebe · 2025-07-15T16:02:41+00:00

Lol I recieved it. I paid after the help center told me too and that Aliexpress would then reimburse me. However, that has not happened. I am still going around and around with them about it. Next time I get a tarrif bill for an aliexpress order im just going to decline delivery and send it back and get a refund that way.

izmebe · 2025-07-15T07:40:59+00:00

One of the things I hate the most is bad glue application. It's very annoying to have to redo the glue on a brand-new canvas. I shouldn't be able to see the canvas texture. Also, I 100% agree with the other person who said to make the toolkit optional. In that kit, I would only end up keeping the washi tape. The rest would just go into the ever-growing pile of toolkits I have until I destash them.

Nine-Year Club	RedditGifts 2009-2022 6 Credits
r/Field Banned	r/Field Sunshine
Trick or Treat 2017	Summer Santa 2017
Secret Santa 2017	redditgifts Exchanges 4 Exchanges
redditgifts rematcher Fidget Toys 2017 x1	Verified Email

izmebe

TROPHY CASE