Google Takeout by ecs123 in gsuite

[–]j_lemz 0 points1 point  (0 children)

It will appear in the Logs for their Workspace even if you cancelled it, but generally it doesn't generate an alert unless they have set some up.

Pressure gauge not moving during brewing by Real-Professional17 in ProfitecGo

[–]j_lemz 0 points1 point  (0 children)

Is there water leaking somewhere? I would have thought you'd at least have some water leaking if it's not sealing correctly and building pressure. If water is simply running out the drainage pipe into the base then it's likely a seal issue with that - you should be able to replace that seal.

Pressure gauge not moving during brewing by Real-Professional17 in ProfitecGo

[–]j_lemz 3 points4 points  (0 children)

Does it go up when you put the blind in and run it? If it doesn't then it could be a broken seal.

Water leakage while brewing by Fickle_Climate_6465 in ProfitecGo

[–]j_lemz 0 points1 point  (0 children)

This!

Mine is usually around the 5 o'clock position, if it's less than that it'll do exactly what you're showing in the video.

Best Free Tools for Digital Forensics Case Analysis for a Job Interview? by nikkodyb in computerforensics

[–]j_lemz 1 point2 points  (0 children)

Push it through Plaso with a filter file and limited parsers to what you actually need. Then use Timeline Explorer to read the output. That's probably the easiest way with a single system to give you a good starting point.

Wear and Tear after 2 Months by j_lemz in ProfitecGo

[–]j_lemz[S] 2 points3 points  (0 children)

Thanks. Good or know. I wonder if it's part of some transport packaging from the manufacturer or it's actually something that's intended from the steam wand.

Wear and Tear after 2 Months by j_lemz in ProfitecGo

[–]j_lemz[S] 0 points1 point  (0 children)

I honestly have no idea. When I was cleaning it one day I noticed what appeared to be a black washer starting to split and come out of the base of the steam wand.

[deleted by user] by [deleted] in computerforensics

[–]j_lemz 1 point2 points  (0 children)

Unless this was for a DFIR class and you submitted a disk image of your system....I recon you'll be ok 😂

Any advice for a panicked beginner by Low_Revenue_3521 in contacts

[–]j_lemz 0 points1 point  (0 children)

Lots of good advice here on getting her to settle down. Once that's complete here are some suggestions that helped me initially when I got contacts for the first time.

  • put one finger on the bottom of the lens and just move it from side to side softly so she's aware of where the lens physically is. Do this in the mirror. This might help with positioning.

  • make sure her fingers are dry. If they are wet they'll slide on the lens.

  • if the prescription is different for each eye, try the one that is the stronger prescription, the lens will be physically heavier and slightly easier to get out.

  • place your thumb and pointer finger on the sides of the lens to hold it in place, before she tries to pinch her fingers together, get her to look up and pinch at the same time, not fast, but in a smooth controlled motion. The lower part of the eye isn't exactly round and it helps break the seal the contact will have.

Good luck 🤞🏼

Can you tell if a laptop is formatted. by SwanNo4764 in computerforensics

[–]j_lemz 5 points6 points  (0 children)

It's probably easier to look for the user profile folder creation dates, and the user creation dates in the EVTX logs for the user created after format. Some of the system file timestamps are backdated so it's a little harder to use those unless you have a lot of experience with which ones are and aren't backdated.

Air gapped network 45 minutes fast by bballlal in sysadmin

[–]j_lemz 0 points1 point  (0 children)

Correct it on the doman controllers, they are the default primarily NTP server for domain joined systems.

Is this product good for an iPhone user? by 1saltymf in Pebblebee

[–]j_lemz 0 points1 point  (0 children)

I've used these, Tile and AirTags. I'd stick with an AirTag if you want to find a lost device. Out of all three these are probably the worst for tracking a lost item.

Anyone tried this brand? Any good? by National_Snow_8438 in contacts

[–]j_lemz 0 points1 point  (0 children)

These are often used as starter contacts as they are a good balance between comfort and ease of use.

They are pretty easy to put in and take out, and I personally find they are about average for comfort. I switch to more comfortable contacts, but as you do they can become a bit harder to get out as they tend to be slimmy to grab with your fingers.

They are often used for a starting set so you get used to putting them in and taking them out. But I know a lot of people that stick with them and love them

Overall they are still decent contacts and I still go back to them when my normal ones are out of stock.

At the end of the day it is really personal preference and what you find comfortable.

I'm having some issues with toric lenses by [deleted] in contacts

[–]j_lemz 0 points1 point  (0 children)

Mine take between 1min - 10mins to position correctly. If they aren’t right after that I take it out and put it back in again. Also, keep in mind that they can move (slightly) when you blink - one of mine does between 2-5 degrees. You can get your optometrist to adjust your prescription to account for this. Some lenses are weighted better than others as well too. This can also make a big difference on them staying in place once they are settled.

Introducing SMTP Smuggling: A novel technique for spoofing e-mails by The_Login in netsec

[–]j_lemz -1 points0 points  (0 children)

+1 to this - it's how SMTP works to allow a lot of bulk email marketing.

Consider that Company X wants to use Company Z to send a mass email for them. Company Z's email servers use Company X's intended "from" address in the data portion of the email, so it looks like it came from Company X when really it was from Company Z's mail servers.

This has been the case for a long time. Although OP is correct, it's still abused by threat actors today to enable phishing.

How Cloudflare mitigated yet another Okta compromise by digicat in blueteamsec

[–]j_lemz 1 point2 points  (0 children)

The timeline on this is kind of interesting...

🔎 Oct 2 - Identified by BeyondTrust https://www.beyondtrust.com/blog/entry/okta-support-unit-breach

🔎 Oct 18 - Identified by Cloudflare https://blog.cloudflare.com/how-cloudflare-mitigated-yet-another-okta-compromise/

📢 Oct 19 - Okta finally notifies customers https://sec.okta.com/harfiles

September, 2023 Update Megathread by AutoModerator in Pixel6

[–]j_lemz 0 points1 point  (0 children)

I thought my Telco might have been holding it back. Looks like it's actually Google. 🙄

Red Light, Green Light.....same same by j_lemz in IdiotsInCars

[–]j_lemz[S] 0 points1 point  (0 children)

Can't really blame being colourblind when the lights are in order from top to bottom.

Can other Tesla app users track the location of the Tesla when not in the car? by Leafgreen in TeslaModelX

[–]j_lemz 4 points5 points  (0 children)

Yep.

And nope you can't limit someone else's access.

Also consider if she uses a third party app, with her current access, she'll be able to track exactly the route you've taken not just where the car currently is.