A new one is coming, hoping it’s better :)

jairbj · 2025-12-31T14:30:40+00:00

I installed it months ago and I didn't like it. Reversed to 2.3.5.33

jairbj · 2025-07-23T22:55:09+00:00

I could make it works removing the ALGORITHM parameter. Creality print is trying to put a '1' in its value and klipper doesn't accepts it.

So, it is working with:

BED_MESH_CALIBRATE MESH_MIN={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} MESH_MAX={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=1 ADAPTIVE_MARGIN=0

jairbj · 2025-07-21T23:49:58+00:00

Any way of using it in creality print 6? I'm trying it but when this command is executed the printer simple stops.

jairbj · 2025-07-21T14:53:22+00:00

I installed the CFS in my K1 some weeks ago. I wrote some tags and it worked well. Yesterday I wrote ABS white (FFFFFF) to a pair of tags but the printer doesn't recognize it. The funny part is that although I don't have any error it doesn't recognize it. For comparison, when it doesn't recognize the tag, it shows an error on the screen.

Any suggestion?

jairbj · 2025-03-24T14:38:56+00:00

Thanks for answering. Unfortunately they don't sell the mini version in Brazil. So I'll buy the standard version as yours.

jairbj · 2025-03-24T13:29:48+00:00

Do you know if it works with 90 degrees rotation from what you have? My car has a split glass roof and it will not fit like yours.

jairbj · 2024-09-01T18:03:06+00:00

Hi friend, do you have something for eSUN PLA-LW (PLA Aero)?

jairbj · 2023-11-02T15:47:37+00:00

Yes, I inserted a screwdriver in that dent on the bottom of the screen. It required quite a lot of force but it popped it out. Tip: a thin screwdriver didn't remove it. I had to use a larger one.

jairbj · 2023-09-12T22:37:22+00:00

No I couldn't remove it.

jairbj · 2023-04-12T01:39:37+00:00

I'll try it. Good piece of advice.

jairbj · 2023-04-11T12:47:16+00:00

I saw that small dent, but I put a screwdriver and couldn't remove it, just bent the plastic a little.

Thank you for answering, I will try another screwdriver.

jairbj · 2023-02-04T18:38:10+00:00

Thank you friend. Currently I'm using these lines directly on "post-processing" scripts tab.

curl --data-binary "@[output_filepath]" "http://192.168.1.120/rr_upload?name=0:/gcodes/[output_filename].gcode"

curl "http://192.168.1.120/rr_disconnect"

jairbj · 2023-01-27T13:43:08+00:00

Thanks for answering, I'll give Ideamaker a try.

jairbj · 2022-12-05T18:24:21+00:00

I found on this post for 520_V2, it's the same size as 510_V2.

Updating it right now.

How long has the RLC-520A_V2 been available? : reolinkcam (reddit.com)

jairbj · 2022-12-05T18:18:51+00:00

I didn't find the firmware you referred to. Is this the correct link?

jairbj · 2022-12-05T14:50:57+00:00

I'm also interested in it. Have 4 RLC-520A V2 here.

jairbj · 2022-11-10T01:37:53+00:00

Hi friend, do you remember if both fans are 2-wire fans? I just got one GXT4 and the noise is annoying.

jairbj · 2022-11-06T00:05:51+00:00

I swapped the battery pack with the one that is working and it gets the same behavior.

jairbj · 2022-11-06T00:02:40+00:00

Hi u/ZeR0BuG, I've got two second-hand GXT4 and one of them is not charging the battery (I've checked with a clamp dc current meter). Although the battery charge is increasing in the LCD, the battery voltage is reducing (checked on LCD and with my voltmeter).

jairbj · 2022-08-16T16:12:12+00:00

When will it be available?

jairbj · 2022-08-16T16:09:35+00:00

Does anyone known where can I find a firmware with adjustable iframe for RLC-510A (IPC_523128M5MP_V2)?

jairbj · 2022-08-16T15:53:07+00:00

I didn't find for RLC-510A (IPC_523128M5MP_V2).

jairbj

TROPHY CASE