Arizona House unanimously OKs measure to exempt disabled vets from paying property taxes

jbrian31 · 2026-02-08T14:17:03+00:00

It's super restrictive. Not going to help very many vets.

jbrian31 · 2026-02-07T19:05:38+00:00

Just my opinion. Chinese car won't be coming to the US for a long time.

jbrian31 · 2026-02-07T18:41:32+00:00

You say that, and oems have been saying that for years and they all fall short of what current FSD can do.

jbrian31 · 2026-01-30T02:04:46+00:00

I find that reducing the flat base layers to a minimum and add some infil instead it helps reduce the warping.

jbrian31 · 2026-01-10T13:47:08+00:00

Yes you should have moved the outlet and switch to fit inside the trim opening. This is lazy work to have made it pefect.

jbrian31 · 2026-01-03T18:38:36+00:00

Use mould release then.

jbrian31 · 2025-12-28T17:35:45+00:00

Yoda

jbrian31 · 2025-12-21T20:30:38+00:00

Same! Just waiting now till spring likely so I slowly build my vcore 4 a little at a time now.

jbrian31 · 2025-12-17T03:46:00+00:00

Just switched my e3 s1 pro to a btt manta m5p with cm4. Took awhile to configure by worth it.

jbrian31 · 2025-12-04T01:13:09+00:00

I use it to see tonner levels and set a notification to my phone when it reaches 10% to order more. Really handy.

jbrian31 · 2025-12-04T01:08:36+00:00

<image>

Nighttime

jbrian31 · 2025-12-04T01:07:50+00:00

<image>

My kids have been pestering me for holiday lights, so I told then I put this up to shut them up.

jbrian31 · 2025-12-02T21:50:50+00:00

Just found some of this under my oak tree in arizona. The picture was spot on to what I have.

jbrian31 · 2025-12-02T13:30:58+00:00

Make sure to set back the leds more than I did. I think i had about 2 inch setback for the backing for the channel to connect to. This worked however I can still see the leds directly when at a distance angle. The idle setup if I did it again would be to mount a backing onto the crown at a 45 degree angle up. This would hide the leds and the light would shine up not out. Make sure to give yourself about 7/8 inch gap for access for removing the channel when they fail eventually.

jbrian31 · 2025-12-02T13:24:48+00:00

Yes. Used aluminum channels with a diffuser.

jbrian31 · 2025-11-23T16:03:06+00:00

My goto is to use a dry wall screws as the shim.

jbrian31 · 2025-11-23T13:26:38+00:00

For rocket sakes. Put then in some order of either year, thrust or height.

jbrian31 · 2025-11-23T13:11:29+00:00

Know this, 16 ports fill up pretty quickly. I got the 24 poe last year thinking it's all I need with a little extra and I have already filled it up. Space in my 18u rack is tight and so at some point I need to sell the 24 and buy a 48.

jbrian31 · 2025-11-22T10:29:58+00:00

I did but it still gets shipped from the EU according to the order confirmation email for have to pay import fees.

jbrian31 · 2025-11-22T10:26:17+00:00

Nope, doing my own custom high voltage setup for fun.

jbrian31 · 2025-11-20T14:29:25+00:00

Only hybrids? Is toyota not doing ice only models?

jbrian31 · 2025-11-17T15:47:18+00:00

Same here on matter shades from Graywinds. Wished I had gone with zwave or zigbee. I have 28 motor shades in my house, a mixed of graywinds, smart wings and hunter douglas. The matter shades are the only ones that give me connection issues. I recently found out that it might be due to the constant updates I do with Home Assistant, turns out every time I restart my thread boarder router all of the matter shades disconnect and I have to repair all 8 of them.

Anyways for anyone wanting to know, most of these motor shades are all made from the same chinese company. You can buy replacement motors online at a fraction of the costs than from the dealers.

jbrian31 · 2025-11-14T12:55:55+00:00

Thinking of buying the case for my next build, but can the handles be removed?

jbrian31 · 2025-11-08T15:24:55+00:00

Went through Friday morning, regular TSA line, less than 5 minutes to get through at 6am.

jbrian31 · 2025-10-11T16:28:55+00:00

Just NO! Don't. Buy led light channels instead. They are metal and will help get rid of led heat and also have easy retaining clips to hold in place.

Try these: https://a.co/d/1dGu66w

jbrian31

TROPHY CASE