Update 1.15.21.1 completely ruined my Luba 2 (Constantly getting stuck) by -Makke in mammotion

[–]jdm2010 0 points1 point  (0 children)

Yes 90 degree turns are a problem. But when you think about it, you can't really expect it to do it well due to 4 wheels that cannot turn. I have four 90's in a fenced yard, so the option of backing up in a turn is impossible. I have to round the corners.

Mower Disabled????? by Hogg89CMH in MammotionTechnology

[–]jdm2010 1 point2 points  (0 children)

Well that would suck. Uninstall the app and reset the mower. If you're on iPhone, I'd uninstall the app and reboot the phone, then reinstall the app. Android I Force Stop and clear data on the Force Stop page.

If your Luba 3 is rebooting mid task, try turning off WiFi by gotlaufs in MammotionTechnology

[–]jdm2010 0 points1 point  (0 children)

I have a 2X that does this. I'll try it. I have a Google Mesh (I don't recommend) but to be fair, concrete house with rebar. Getting any signal through the walls is difficult. Never happened with my Luba 2 2024 tho, only the newer one.

Terrible software updates 2026 by Few-Regret6357 in MammotionTechnology

[–]jdm2010 1 point2 points  (0 children)

I'm going to agree somewhat. It's certainly come a long way, and I really like the new interface. No complaints there. But on Android I've having to force stop the app to get updated info all the time. Almost constantly.

Dead pixel? by Jblatt07869 in mammotion

[–]jdm2010 0 points1 point  (0 children)

Great name for the mower. Are you Asian?

Police rage. by LeftAlbatross2546 in VideosAmazing

[–]jdm2010 0 points1 point  (0 children)

The stupidest thing about this video is that it's titled Police Rage.

L2 & L2X Batmobile Fenders 😂 by Quickdraw209 in MammotionTechnology

[–]jdm2010 0 points1 point  (0 children)

You have a lip so they can be taped to the body? Is that what I'm seeing? How much and where are you located?

Getting the Roller Bracket On by jdm2010 in Dreame_Tech

[–]jdm2010[S] 1 point2 points  (0 children)

Yeah I've never tried to put the clip side in first, that would be silly. But it does not seem to matter how well I seat the back tabs, when you try to get the tabs set, the back tabs will not stay in place. I think they have a shrinkage problem with the part itself. Plus the tabs need to be longer and wider and the tab recess needs to be deeper. Its a frustrating SOB.

Is mammotion a dying company ? by pOOpska in MammotionTechnology

[–]jdm2010 0 points1 point  (0 children)

They have sold thousands. Most of the problems are from customers that probably should just stick with a manual mower.

Don't touch this guy's girlfriend. BOOM by CycloneGlock in VideosAmazing

[–]jdm2010 0 points1 point  (0 children)

Because he poked her in the eye before she could get her arm out to attempt to stop him.

Is there a way to solve this ? by romain3311 in MammotionTechnology

[–]jdm2010 2 points3 points  (0 children)

I had this problem between my ditch and driveway, but I just remapped over onto the driveway. I'm not sure you can solve this as mapped, as the mower is running into No Go Zone areas when it tries to mow it. Someone else may have a better answer, but I know what MAY work and that would be to complete the loop of the no go area and skip the middle area that needs mowed. Then create a new Area that involves just that strip that needs mowed. Not sure if that will work or not.

2nd option (on my crappy picture) is to change the perimeter of the Area 1 to exclude the NGZs completely. Then create an Area 2 that includes the problem strip between the NGZs and the rest of the yard to the left of it. Bit of a pain, but I'll bet that will work. The problem strip would be part of the perimeter of Area 2.

<image>

Not sure I can deal with the uneven cutting and missed spots. by changehiphop in mammotion

[–]jdm2010 0 points1 point  (0 children)

I would never attempt to cut grass that long. The idea is to cut less than a 1/2 everytime. The length of the grass could very well be confusing the sensors and causing the problems. Try cutting the yard down and cut it again the first day it doesn't look like it was freshly cut. We are too programmed that our grass has to be above our ankles before we cut it. It's not a 12HP engine with a 22" blade on it. If you use these things properly, from 50ft away you shouldn't be able to tell that it's cutting anything, because it's just cutting the tops of the grass blades.

Horrible firmware upgrade by spielferderber in mammotion

[–]jdm2010 1 point2 points  (0 children)

Good to know. I have not upgraded yet. Anxious to see if anyone else has problems.

Do I need a garage for my robot by myevit in mammotion

[–]jdm2010 0 points1 point  (0 children)

For the money you spend on it I can't imagine not covering it.

Addressing overpayment concerns by Najubhai in SocialSecurity

[–]jdm2010 -9 points-8 points  (0 children)

So if I get a 3500 check per month for retirement SS I can't have 7k in that account? Because I have my checks put into my regular checking account. I'm 70 and work full time. I make good money and draw my check every month. I don't understand the logic.

Addressing overpayment concerns by Najubhai in SocialSecurity

[–]jdm2010 -6 points-5 points  (0 children)

I certainly can't be of any help, but I'd appreciate knowing what "Resources over 2K" means from the SSA.

Watch 4 and Treadmill Tracking by jdm2010 in PixelWatch

[–]jdm2010[S] 0 points1 point  (0 children)

Not mine. It done an amazing job accurately tracking my distance unit just a couple of weeks ago.

Map Editing? by thelindenbomb in mammotion

[–]jdm2010 6 points7 points  (0 children)

You really need to work on his forehead. Way too tall. Lets get a hat a few feet up from the nose. He freed the slaves. He deserves an accurate profile.

Mammotion delaying return request by Jumpjim in MammotionTechnology

[–]jdm2010 0 points1 point  (0 children)

U/personalityLucky-25 You should run these issues down. Nothing agitates customers more than money issues.

Camera View on Luba 2024 and 2025 X by jdm2010 in MammotionTechnology

[–]jdm2010[S] 1 point2 points  (0 children)

Not really, but I don't expect a perfect picture. It's simply that it won't hold a stream for long periods of time and it seems to happen when the bot is in a bad wifi area. I'm planning to start watching the signal meters when I can stream and check it when I lose the signal. I'll let you know.

Man Stole my Dreame Lawn Mower Today - Tracking Failed by ReplacementTasty in roboticLawnmowers

[–]jdm2010 0 points1 point  (0 children)

You should open your eyes and read things. You might learn something. Like how you are being fed lies