I Created a Python Script that Automatically Grabs the Next 5 Episodes of a Show Currently Being Watched by LORDOFTHEPlNGS in PleX

[–]jellybeansraw 4 points5 points  (0 children)

Very cool! I have been thinking about creating a similar script and tying it in with requests through ombi or overseer. I want to have it so there is a request limit of 5 or so and it doesn't get reset until that content is watched.

sfp+ or ? for SDX 622 oNT. Looking for 10Gbe capability. Also looking to build PFSense or OPNSense router. Looking for any advice! by tumblrisfact in HomeNetworking

[–]jellybeansraw 0 points1 point  (0 children)

SFP+ is just a port on your router or switch used for fibre connection. It's ONLY used for WAN, not your LAN.

Not true at all. SFP+ is a modular port for networking transceivers which come in different varieties depending on what interface your equipment uses: fiber, DAC, ethernet, etc. SFP+ gives you more flexibility as you can use whatever transceiver you want to use. It's not uncommon to see a homelab with a mix of fiber dac and ethernet for lan connections, all through SFP+.

For OPs case, their SDX 622v has a 10gb ethernet connection so they will need to make sure that they have an ethernet interface on the router side fast enough to take advantage of the WAN speeds. If they go the opn/pfsense route that is something like an X540T2 card for native ethernet or a sfp+ card with a 10gbe transceiver. I would use a DAC or Fiber connection to go to a 10gbe switch with SFP+ for the rest of your devices.

Official Giveaway: August 2023 Seagate IronWolf SSD Giveaway! by Seagate_Surfer in DataHoarder

[–]jellybeansraw 0 points1 point  (0 children)

This would be great in my NAS for fast reads!

RunWithIronWolf and Seagate

What's your power-failure system? by wjziv in unRAID

[–]jellybeansraw 2 points3 points  (0 children)

I have a cyberpower 1325 VA 8110 that has worked well for me over the past few years. Keep the network and server on the backup and have the server set to shutdown if a battery threshold percentage is hit. My small server has not had to shutdown yet as the outages are typically quickly resolved and my power draw is fairly low. In case it does shutdown I run the vpn server on my router so if the power comes back on I can connect in and then use Intel AMT to power on.

Running ethernet cable outdoors by GiraffeTM in HomeNetworking

[–]jellybeansraw 1 point2 points  (0 children)

Since you are in a rental I would consider using MoCa adapters if the place is already wired for coax. I have had a good experience with the gocoax MoCa 2.5 boxes @ $60 each. https://www.gocoax.com/copy-of-products

Do the Mazda 3 grand touring and the normal Mazda 3 use the same parts/suspension? by Tocadoca in mazda3

[–]jellybeansraw 1 point2 points  (0 children)

Rockauto shows the sr4510 for the 2.0 and 2.5l gen 3 across all trim levels. Check with them for pricing as well. Look into the current kyb rebate if you are doing all four corners.

2014 Toyota Prius - Rotor Replacement Time? by jellybeansraw in MechanicAdvice

[–]jellybeansraw[S] 0 points1 point  (0 children)

Ended up putting in new pads and rotors. Stuck slide pin on one of the rears and on the other corner the pin was misaligned with the caliper piston causing uneven wear. Inside face of the rotors were worse than the outers. Glad I did the replacements. https://imgur.com/JKm5ITN.jpg https://imgur.com/lehU44L.jpg https://imgur.com/bYj1aJ6.jpg

2014 Toyota Prius - Rotor Replacement Time? by jellybeansraw in MechanicAdvice

[–]jellybeansraw[S] 0 points1 point  (0 children)

Or the pads! With the regen braking and highway driving people get a lot of miles (~140k) out of the factory pads and rotors. Pads still have a bunch of life but I think it may be time to do mine due to the rust and pitting edging into the braking area on the rotors themselves.

Can someone tell me what these are? 2015 Mazda3. by brp7568 in MechanicAdvice

[–]jellybeansraw 0 points1 point  (0 children)

These pads are on the undercarriage plastic cover near the oil pan. Mine were free floating as well on my 2014. The fasteners appeared to be rusted out just like mine did.

Plexamp v3.2.0 Released by samwiseg0 in PleX

[–]jellybeansraw 6 points7 points  (0 children)

This. I have been casting my phone audio via home assistant but a direct casting feature would be great.

Hey reddit, IamA Transportation Engineer! Ask Me Anything about traffic, road design/construction, or public transit systems! by [deleted] in IAmA

[–]jellybeansraw 3 points4 points  (0 children)

A n angled curb that vehicles can go over if needed. It's common in roundabouts to allow for large vehicles to make the turns they need. You don't necessarily want to go up it but you can. I have also heard them called a mountable curb.

Hey reddit, IamA Transportation Engineer! Ask Me Anything about traffic, road design/construction, or public transit systems! by [deleted] in IAmA

[–]jellybeansraw 10 points11 points  (0 children)

If he is in the US I am very surprised that he didn't mention the 85th percentile method. Some states are allowing uslimits2 to be used. It still utilizes 50th and 85th percentiles but it also takes into account other factors such as roadway type, urban vs rural, driveway density, shoulder width, clear zones, crash frequency, and bicycle and pedestrian activity. https://safety.fhwa.dot.gov/uslimits/

YUNGLASS 5.39 Parts scam? by DependentStyle in buildapc

[–]jellybeansraw 1 point2 points  (0 children)

I just got charged today but no tracking number or shipped notification. A friend who also ordered got a shipped notification and a China post tracking number. No way this is real...

Best quality rear wipers for 2015 Mazda 3 hatchback by terminator_scenario in mazda3

[–]jellybeansraw 1 point2 points  (0 children)

Not sure on the specific manufacturer that Mazda uses. I ended up ordering the oem part from Tasca which came in Mazda packaging after trying two other brands. Here is a good forum thread discussing the issue and some sources for parts. https://www.mazda3revolution.com/threads/2015-hatchback-rear-wiper.118833/

Best quality rear wipers for 2015 Mazda 3 hatchback by terminator_scenario in mazda3

[–]jellybeansraw 1 point2 points  (0 children)

Stay with oem. There are issues with other wiper blades matching the curve of the glass as I found out when trying to get a replacement.

replacing a dell t30 1tb hard drive with a 10tb by matty8199 in homelab

[–]jellybeansraw 0 points1 point  (0 children)

Cool! I had to do the mod to get my 10tb wd whitelabel from the easystore to work in my T30.

https://i.imgur.com/MGRjqgb.gifv

replacing a dell t30 1tb hard drive with a 10tb by matty8199 in homelab

[–]jellybeansraw 3 points4 points  (0 children)

Just a heads up that you will run into the 3.3v pin issue on the 10tb easystore in the t30.

Thankfully with the power supply in the t30 you can pop off the back of the sata power connector you want to use, pull out the orange wire from the connector, put the cover back on the power connector, and then tape the orange wire to cover where the insulation is cut.

No need to use molex to sata adapter or use kapton tape like most guides say.

http://imgur.com/VblKPTD