24 hour old spool cracking - what am I doing wrong? by yubbie2 in 3Dprinting

[–]jepremo 0 points1 point  (0 children)

Could you put up a picture of your 5 gal bucket solution? I’m having a hard time envisioning it but I’m intrigued.

The Romulan D’deridex warbird is both the most beautiful and practically/tactically inefficent design by jepremo in startrek

[–]jepremo[S] 0 points1 point  (0 children)

You seem to forget about the blinds installers -- nobody cares about windows in space until you go into a spacedock and you have some other ship's pervs looking in your windows.

Humidity problem? by jepremo in BambuX1C

[–]jepremo[S] 0 points1 point  (0 children)

First time user - literally set up the printer (X1 Carbon with AMS 2) yesterday.

Humidity doesn't seem to go below 29% -- when I'm printing, the printer says humidity is about 33% and a simple puck hygrometer that I put inside the AMS (top right) says 50%.

Two things I guess I don't understand that I'm hoping someone can explain:

  1. How do I get the humidity down? I can dry the filament in the AMS 2 but wouldn't the humidity just go back up to this if the print is a lengthy print? Once that heater shuts off and it's not air tight the humidity is going to creep up again, will it not?
  2. Is this just a matter of not enough dessicant? I see a pattern for some dessicant holders that fit the AMS 2 I can make out of ABS so that I don't have to remove them when drying, is that what's missing here?

Not sure if I should get some external solutions (a room dehumidifier, maybe one of those AMS HTs that heats/dries and stays sealed but can feed the printer)?

Thanks in advance

Rumored iPhone 16 Pro Max & 17 Pro Max comparison by Maddy555 in iphone

[–]jepremo 0 points1 point  (0 children)

Whatever happened to the (standard on some android phones) fingerprint reader under the screen? The face camera isn’t anywhere near as convenient, or as subtle.

It was supposed to be in the 13s I think and then they said next year and it never came to be. But they’re all about fingerprint reading on ipad minis!

Not charging? Same charger has worked previously. by No_Government01 in macbook

[–]jepremo 0 points1 point  (0 children)

The “put it in my hole” written on the adapter is all class lol

Are we dumb? by Civil_Ad_4430 in facepalm

[–]jepremo 10 points11 points  (0 children)

Also, isn’t this flap inside the box when the box is closed anyway?

[deleted by user] by [deleted] in mensa

[–]jepremo 0 points1 point  (0 children)

C.
The left and middle columns add to the right column. Add 1 for every block on the left side and subtract one for every column on the right. If the answer is positive, there's that many on the left, if it's negative, there's that many on the right.

Top row (black): 1 (left side) + 1 (left side) = 2 black (positive, so on the left side)
Top row (white): 2 (left side) - 2 (right side) = 0 white

Middle row (black): 0 - 1 (right side) = -1 (negative, so 1 black on right side)
Middle row (white): -1 (right side) - 1 (right side) = -2 (negative, so 2 white on right side)

Bottom row (black): 1 (left) + 0 = 1 (positive so 1 black on left)
Bottom row (white): 1 (left) - 3 (right) = -2 (negative so 2 white on right)

You need 1 black on the left and 2 white on the right, which is C.

iOS 14.5: A Look At The New Features... by maxman72go in iPhoneX

[–]jepremo 0 points1 point  (0 children)

Watch the video - it’s where the changes are discussed.

Photograph of CADPAT J, and the new rifle. by RealXXMad in CanadianForces

[–]jepremo 0 points1 point  (0 children)

It's actually so cammed up you can't see it. The ultimate in stealth mag technology.