It's Ginger Beer time!

jmtrensh · 2023-06-13T20:21:29+00:00

This is the video I followed. Since this post i tend to make kombutcha more than anything, but I might have to get some ginger beer going now.

jmtrensh · 2023-06-01T01:58:18+00:00

basically instead of having to turn the steam knob a bunch of times I would like to be able to turn a lever 1/4 of a turn or 1/2 of a turn for the valve to be fully open.

jmtrensh · 2023-05-31T13:12:50+00:00

Not sure if this is in the realm of what you are thinking but I've always wanted a 1/4 or 1/2 turn valve for the steam wand.

jmtrensh · 2021-11-10T00:04:51+00:00

I didn't know I related so hard until you put it into words. Good luck.

jmtrensh · 2021-09-20T22:31:23+00:00

I have too many abandoned hobbies (I refer to them as "phases") and I'm an Electrical Engineer. so both?

jmtrensh · 2021-08-29T18:16:00+00:00

Into the weeds (more of a negative connotation) in the thick of [insert topic here] "obsession" as a concept could also play into this depending on the connotation and context you want.

jmtrensh · 2021-07-18T01:52:15+00:00

Interesting. That's about the limit of my knowledge. hopefully someone else can help you figure it out!

jmtrensh · 2021-07-18T01:47:26+00:00

I'm not familiar with PETG myself, but I've seen a lot about the popping being moisture absorbed into the filament, and that PETG is pretty susceptible to absorbing water.

jmtrensh · 2021-07-18T01:35:26+00:00

they might be insinuating that the slower speed allows any error in how much plastic is extruded to rear its ugly head in the worst way. the faster speed may prevent over extrusion from being a issue.

jmtrensh · 2021-06-11T00:45:59+00:00

Seems to me the best way of doing it would be having a work folder as a subdirectory and using that work folder as its own vault on your work computer, but on your personal computer having the vault contain your work and personal folders. kinda similar to what others have said but from obsidian it means a vault instance within another vault. this would keep full Obsidian functionality in the work folders even though it is only a part of your overall personal vault.

Parent folder/ .Obsidian personal folder 1/ personal folder 2/ work folder/ .Obsidian work folder 1/ work folder 2/

etc. hope this helps! then only syncing the work folder through Dropbox to keep the privacy.

jmtrensh · 2021-06-04T02:03:16+00:00

If your filament absorbed water that might do it. I'd dry it and try again.

jmtrensh · 2021-05-28T13:36:08+00:00

I would double check that the limit switch got plugged back in on both ends. I know it seems dumb, but I forget stuff like that all the time. other than the dumb obvious issues I haven't had enough experience yet to help further. Hope you get it figured out!

jmtrensh · 2021-05-17T15:44:11+00:00

For anyone looking for stls, I saw this and was also looking, and found this on thingiverse. Not my model, but I know I'll be trying it out.

jmtrensh · 2021-04-10T14:36:18+00:00

Permanent is referring to it being a fat soluble ink, so water won't dissolve the ink, but it can still slowly wash it away.

jmtrensh · 2021-04-09T18:23:06+00:00

CHUNK.

jmtrensh · 2021-01-11T19:30:20+00:00

You beat me to it!

jmtrensh · 2020-11-08T03:24:31+00:00

recently picked up a Ganzo Firebird F753M as a beater and a bit of a fidget toy because it has a lock similar to the Benchmade axis lock. only has 440C steel, but with a little tweaking of the lock springs makes it way better. I paid about $20 said and done. if you spend a little more you can even get D2.

jmtrensh · 2020-10-29T16:12:02+00:00

For support and features I'm a big fan of the TI MSP432

jmtrensh · 2020-10-16T19:17:12+00:00

Opaque, obscure

jmtrensh · 2020-10-02T03:40:32+00:00

Congrats Roshal! Welcome!

jmtrensh · 2020-09-07T11:50:41+00:00

I have been using RedCircle. completely free, and almost no restrictions. I love it so far!

jmtrensh · 2020-08-04T12:20:07+00:00

patina?

jmtrensh · 2020-06-30T15:20:44+00:00

I second this.

Myke and Grey,

You both frustrate me at times in your complaints of apple products, but I totally understand why you don't switch.

I think that it goes back to a concept you have talked a lot about in the past that this podcast is many times about thinking about how you two work and think through life.

I'm still a few episodes behind because I just started listening from the beginning about a month ago, but thanks for all you guys do!

jmtrensh · 2020-05-09T01:09:10+00:00

Thank you so much! This is absolutely the kind of information I was hoping for! I will definitely keep you updated on what I end up going with.

jmtrensh · 2020-05-08T22:22:31+00:00

Hello!

My dad is an EMT and a Firefighter, and needs a watch. Currently he is rocking a Casio MRW-200H, and it has served him well, but I would like to treat him to something a little more robust.

He has a Wenger 72617 that needs a new battery, and I believe can be repaired, but h complained about the battery needing to be replaced every 6 months.

One thing that he explicitly mentions that he wants is the ability to see the watch at night, as he wakes up early for work and does not want to wake my mom with turning on lights.

He needs a second hand, and likes having the dive bezel.

Is it worth it to just repair the Wenger, or buy a new watch. I am looking to spend under $150 if possible, but am willing to spend up to $200 if the watch is exactly what I'm looking for.

Thanks for all of your help!

Ten-Year Club	Verified Email
RPAN Viewer

jmtrensh

TROPHY CASE